• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.4
• /
• pp.514-522
• /
• 1999

The laser-induced plasma affects greatly on the results of welding process. moreover selective evaporation loss of alloying elements leads to change in chemical composition of weld metal as well as the mechanical properties of welded joint. this study was undertaken to obtain a fundamental knowledge of pulsed laser welding phenomena especially evaporation mechanism of different aluminum alloys. The intensities of molecular spectra of AlO and MgO were different each other depeding on the power density of a laser beam Under the low power density condition the MgO band spectrum was predominant in intensity while the AlO spectra became much stronger with an increase in the power density. These behaviors have been attributed to the difference in evaporation phenomena of Al and Mg metals with different boiling points and latent heats of vaporization. The time-averaged plasma temperature and electron number density were determined by spectroscopic methods and consequently the obtained temperature was $3,280{\pm}150K$ and the electron number density was $1.85{\times}10^{19}\;l/m^3$.

• Journal of the Korean Ceramic Society
• /
• v.22 no.5
• /
• pp.17-22
• /
• 1985

This study was to make powder by coprecipitation method and spray dispersion precipitation method in $(1-x)ZrO_2-xMgO$ system to improve sinterability. As the result the specific surface area of powder prepared by spray dispersion precipitation method and coprecipitation method was above $110m^2/g$ and $10-20m^2/g$ respectively. Spray dispersion precipitation method was more effective than coprecipitation method in powder preparation.

• Journal of Plant Biotechnology
• /
• v.31 no.1
• /
• pp.13-17
• /
• 2004

To improve transformation efficiency, the callus of Lilium lancifolium Thunb. were bombarded by particles coated with pIG 121 Hm which include NPT II and GUS genes, and then cocultivated with Agrobacterium tumefaciens EHA101 which contain pIG121Hm binary vector, carrying neomycin phosphotransferase (NPT II) and $\beta$-Glucuronidase (GUS) genes. Three days after cocultivation with Agrobacterium tumefaciens and particle bombardment, the callus clusters were transferred to MS medium containing 1mg/L 2,4-D, 0.1mg/L BAP, 100mg/L kanamycin and 200mg/L carbenicillin. Four weeks after transfer to the selection medium, GUS expression was detected and PCR analysis revealed the presence of NPT II fragment of the expected size (700 bp) in the transformed callus. The GUS expression from Agrobacterium-mediated transformants after particle bombardment increased to over 3-folds compared with that of callus cocultivated with Agrobacterium tumefaciens without particle bombardment. The callus clusters containing kanamycin resistant gene were transferred to MS medium containing 1mg/L NAA and 1mg/L BAP. Somatic embryos were developed in four weeks and microbulbs expressing GUS were formed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.906-906
• /
• 2012

밭에서 발생하는 비점오염물질은 강우량, 강우강도, 경사도, 토양, 시비량 등에 영향을 받는다. 따라서 효율적인 비점오염물질의 관리를 위해서는 영향인자에 대한 자세한 분석이 선행되어야 한다. 이에 본 연구에서는 강원도 평창군 대관령면의 경사도가 다른 고랭지 밭 두 지점을 선정하여 비점오염물질의 유출특성을 파악하고, 향후 비점오염원의 효율적인 관리를 위한 기초자료를 제공하고자 하였다. 연구기간은 2011년 4월부터 11월까지 유출이 발생한 8회의 강우사상에 대해 모니터링을 수행하였다. 연구결과 경사도 4.9% 밭에서의 유출율은 0.05~0.48이었으며, 16.8% 경사에서는 0.31~0.57로 나타났다. 유량과 채취된 수질 시료를 이용해 EMC를 산정한 결과 경사도 4.9%인 밭에서는 SS 762.1~2422.7 mg/L $BOD_5$ 4.5~14.9 mg/L, $COD_{Cr}$ 16.1~62.0 mg/L, $COD_{Mn}$ 7.5~43.2 mg/L, TN 9.602~21.021 mg/L, TP 2.544~6.763 mg/L의 범위로 나타났다. 반면 16.8%의 경사밭에서는 SS 116.0~2015.5 mg/L $BOD_5$ 6.0~9.5 mg/L, $COD_{Cr}$ 21.9~75.4 mg/L, $COD_{Mn}$ 4.3~33.1 mg/L, TN 10.937~46.295mg/L, TP 2.611~11.197 mg/L의 범위로 나타났다. 두 지점의 유출률과 EMC를 비교한 결과, 경사가 증가함에 따라 유출율이 증가하는 것으로 나타났으며, SS를 제외한 모든 수질항목의 EMC가 증가한 것으로 나타났다. SS의 경우 경사가 큰 고랭지 밭에서 낮은 값을 보였는데, 이는 16.8%의 경사밭에서 등고선 방향으로 경운을 하여 흙 입자의 유실이 적었기 때문인 것으로 판단된다. 본 연구의 결과와 같이 밭에서 발생하는 비점오염물질의 유출특성은 강우조건(강우강도, 선행무강우일수), 시비량, 토양, 지표의 피복상태 등에 따라 다르기 때문에 장기적인 모니터링을 통해 기초자료를 축적하는 것이 중요하다고 판단된다.

• Economic and Environmental Geology
• /
• v.47 no.5
• /
• pp.489-496
• /
• 2014

The occurrence and mineralogical characteristics of asbestos in dolostone at Ungdo, Seosan were investigated by analyses of PLM, XRD, and SEM/EDS. Representative outcrops of dolostone at Ungdo were examined and four dolostone samples were collected according the occurrence type to identify the shape of asbestos in dolostone samples. The host rock of dolostone had been produced from the hydrothermal alteration and/or thermal metamorphism of which main source was assumed as the acidic granite. Tremolites were observed near the cracks or fractures of the dolostone as tamping or gob types. From the mineralogical analyses, main minerals of dolostone were dolomite with calcite, quartz, talc, amphibole, and pyroxene. From SEM/EDS analyses, tremolite-actinolite asbestoses were observed in dolostone and their shapes were prismatic and fibrous (less than $1{\mu}m$ in width). Non-asbestos prismatic forms were also found and they would transfer to asbestos particles resulting from the cleavage and fracture of the prismatic particles. Overall results suggest that asbestoses in Ungdo dolosotnes were mainly tremolite-actinolite and they were originated from the hydrothermal alteration of Ca-Mg rich dolostone.

• Korean Journal of Soil Science and Fertilizer
• /
• v.28 no.4
• /
• pp.340-349
• /
• 1995

Effects of the zeolite particle size on the soil chemical properties and on rice growth was investigated on the pot with the loamy sand (Sadu series) and silty clay loam(Paju series) soils. All the zeolite treatments brought the increase of unhulled grain yield on the both loamy sand and silty clay loam soils. Unhulled grain yield increased with increasing the amount of zeolite applied and with decreasing the amount of particle size of zeolite applied on both soils. Unhulled grain yield increased significantly by 11.1% (22.79g/head) with 2ton/10a of smaller than $106{\mu}m$ size zeolite on the loamy sand soil and on the silty clay loam soil, yield increased by 9.3% (24.98g/head) with 1.5ton/10a of smaller than $106{\mu}m$ size zeolite. CEC, pH and contents of exchangeable cations of the soil after experiment were raised by increasing the amount of zeolite and also by decreasing the particle size of zeolite at both soil. At the heading stage, the zeolite treatments improved the growth of rice plant compared to control. The nutrient contents(T-N, Ca, Mg, K, Na), except phosphorus, in the rice plant grown on the zeolite treated soils were higher than control plot.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.5
• /
• pp.469-476
• /
• 2010

The purpose of the study is to find ways to decrease turbidity and residual aluminum by improving the efficiency of coagulation process through controlling the pH of the source water with $CO_2$ when the pH increases by algal bloom or by the characteristics of the source water. Water quality parameters were monitored before and after $CO_2$ addition in February, March, April, and December, when the pH of the source water is over 8.0 and constant regardless of day and night. Water quality parameters closely related with evaluation of treated drinking water quality were monitored in detail, e.g. aluminum, turbidity, particle counts, TOC, THMs, 2-MIB, and geosmin. According to the results, inorganic water quality parameters such as turbidity, particle counts, and aluminum were decreased due to improved efficiency of the coagulation process. It was concluded that the pH of the water in the arrival basin must be controlled below 7.4 by adding $CO_2$ when the pH of the source water increasing. By controlling pH with $CO_2$, the water quality could be maintained within the drinking water quality goal of Seoul City (<30 particle/mL of particle count, <0.05 NTU of turbidity and <0.02 mg/L of aluminum). The change of the pH could not affect the concentrations of DBP's (e.g., THMs, CH, and HAAs) and taste/odor causing compounds (e.g., 2-MIB and geosmin). 2-MIB and geosmin were affected more by their initial concentrations in the source water.

• Journal of the Korean Electrochemical Society
• /
• v.15 no.2
• /
• pp.67-73
• /
• 2012

Spherical lithium manganese oxide spinel, $LiMn_{2-x}M_xO_4$ (M = Al, Mg, B) prepared by wet-milling, spray-drying, and sintering process has been investigated as a cathode material for lithium ion batteries. As-prepared powders exhibit various surface morphologies and internal density in terms of boron (B) doping level. It is found that the dopant B drives the growth of the primary particle and minimizes the surface area of the powder. As a result, the dopant enhances the internal density of the particles. Electrochemical tests demonstrated that the capacity of the synthesized material at 5 C could be maintained up to 90% of that at 0.2 C. The cycle performance of the material showed that the initial capacity was retained up to 80% even after 500 cycles under the high temperature of $60^{\circ}C$.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.7 no.4
• /
• pp.164-173
• /
• 2004

Field survey on the marine environmental characteristics by the distribution of dinoflagellate cysts and organic matter was carried out bimonthly at 6 stations in Gamak Bay, the southern part of Korean Peninsula from June 2000 to April 2001. The range of environmental factors on vertical sediments such as ignition loss (IL), chemical oxygen demand (CODs), total sulfide (H₂S), particulate organic carbon (POC), particulate organic nitrogen (PON) and phaeopigment were 3.21∼11.18％. 12.25∼99.26 mgO₂/g dry, 2.49∼116.18 ㎍/g dry, 2.91∼116.18 mgC/g dry, 0.53∼2.82 mgN/g dry and 2.49∼116.18 ㎍/g dry, respectively. A total of 38 species dinoflageuate cysts belonged to 21 genera, 36 species, and 2 unidentified species. A cysts density were 18∼3,836 cysts/g dry. Vertical distribution of organic matter and dinoflagellate cysts was rapidly decreased from surface to deeper sediment. The eutrophication in the northwestern parts of Gamak Bay might originated since 1980s.

• Journal of the Korean institute of surface engineering
• /
• v.50 no.3
• /
• pp.212-218
• /
• 2017

$Mg_xNi_yZn_{1-x-y}Fe_2O_4$ ferrite powders were prepared by self-propagating high temperature synthesis followed by classifying with an ultrasonic wet-magnetic separation unit to get high pure nano-sized particles. The $Mg_xNi_yZn_{1-x-y}Fe_2O_4$ ferrites were well formed by using several powders like iron, nickel oxide, zinc oxide and magnesium oxide at 0.1 MPa of oxygen pressure. The ultrasonic wet-magnetic separation of pre-mechanical milled ferrite powders resulted in producing the powders with average size of 800 nm. The addition of a surfactant during the wet-magnetic separation process improved productivity more than twice. The coercive force, maximum magnetization and residual magnetization of the $Mg_xNi_yZn_{1-x-y}Fe_2O_4$ nano-powders with 800 nm size were 3651 A/m, $53.92Am^2/kg$ and $4.0Am^2/kg$, respectively.