• Applied Chemistry for Engineering
• /
• v.18 no.6
• /
• pp.625-629
• /
• 2007

Recently, there is a growing interest about unsaturated lecithin having excellent characteristics of skin affinity and absorbency. Accordingly, this study intended to develop a natural sulfuration material in order to enhance the stability of oxidation of unsaturated lecithin and substitute existing sulfuration materials which indicate variability and toxicity. As sulfuration components, plenol acid family, 3,5-dihydroxybenzoic acid, and flavanone were analyzed. Total polyphenol content was higher in the root extracts (133.85 mg/g) than in the fruit extracts (53.5 mg/g). Above 100 ppm polyphenol content, the free radical removal efficiency and lipid oxidation prevention of the root extracts were 20.1 and 19.2% superior compared with BHT respectively. Also, the extracts indicated high survival rate of more than 95% below 1250 ppm, showing the stability. For the stability of liposome made from an unsaturated lecithin, the root extracts were superior to the fruit extracts. Especially, 15.1 and 13.9% of sulfuration effect and zeta potential were improved with 9.3% reduced particle size compared with BHT as the control group, respectively.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.3 s.47
• /
• pp.353-359
• /
• 2004

The extent of silica flocculation can be modified by varying the silica concentration, aqueous phase pH, salt and polvmer concentration. High volume fraction W/O emulsion stabilized by hydrophobic silica was established with various aqueous phase conditions for cosmetic application. By increasing the silica concentration up to $1.0\;wt\%,$ the size of droplet decreased. A high silica concentration increased the viscosity of continuous oil phase by network formation, which resulted in target size of droplet. The stability of W/O emulsion is improved as increasing the aqueous phase pH. At low and intermediate pH, the emulsions became more stable by adding salt $(0.083\;mol\;dm^{-3}\;MgSO_4).$ At high PH, the presence of salt caused significant destabilization. The gelation behavior of the emulsion indicates that the effect of salt on silica-stabilized emulsion is derived from an electrostatic attraction. The addition of xanthan gum in aqueous phase increased the mono-dispersity of the W/O emulsion by making water more hydrophobic and hindering the recombination of droplets. In conclusion, these results indicate that very stable emulsifier-free, finely dispersed W/O emulsion can be achieved for cosmetic application by changing the aqueous phase composition.

• Journal of Korea Foundry Society
• /
• v.10 no.1
• /
• pp.43-49
• /
• 1990

The influences of Cu and Mg addition on wear properties of SiC particulate reinforced Al-Si metal(alloy) matrix composites were investigated. Metal matrix composites were prepared by combination of compocasting and hot pressing techniques. The main results obtained are as follows : 1) The composite with Mg addition exhibits letter wear resistance than that with Cu addition. It is considered that Mg addition improved wettability of matal matrix composite by the strong segregation to the SiC / Al matrix interface. 2) After homogenization treatment, it was found that the interfacial segregation of Mg was predominant, while that of Cu was not detected. 3) The SiC / Al-11Si eutectic composite exhibits better wear resistance than the SiC / Al-6Si hypoeutectic composite does. 4) It seems that the increase in the amount of Mg addition affects on the uniform dispersion of SiC particulates, on the refinement of microstructure and on age hardening and these effects cause wear resistance improvement of composites.

• Journal of the Korean Ceramic Society
• /
• v.38 no.7
• /
• pp.615-620
• /
• 2001

E $r_2$ $O_3$-MgO 복합 첨가가 BaTi $O_3$계 내환원성 X7R 재질의 유전특성에 미치는 영향에 대하여 환원성 분위기에서 연구하였다. (B $a_{1-x}$ E $r_{x}$)( $Ti_{1-y}$M $g_{y}$ ) $O_3$첨가계에서 1.0 mol% 이상 MgO의 복합첨가로 E $r_{Ba}$ 도너 불순물과 $Mg_{Ti}$ 억셉터 불순물이 전기적으로 보상되어, 환원성분위기 소결 후에도 $10^{10}$Ωcm 이상의 높은 절연저항을 나타내었다. E $r_2$ $O_3$가 첨가된 시편에서 MgO가 2.0 mol% 이상 첨가될 경우, 유전율의 온도안정성이 향상되어 X7R 규격을 만족시켰으며 1.0$mu extrm{m}$ 이하의 작고 균일한 입자가 관찰되었다. 한편, E $r_2$ $O_3$의 첨가량이 3.0 mol%로 증가함에 따라 유전율의 온도안정성이 향상되었으나 상대적으로 상온 유전상수값이 현저히 감소하였다.였다.다.

• Journal of Power System Engineering
• /
• v.3 no.2
• /
• pp.57-63
• /
• 1999

The fabrication of $Al_2O_3/Al$ composites by pressureless infiltration technique was made to investigate the effects of processing variables such as content of Mg, processing temperature and time on the infiltration behavior of molten Al and microstructure. When the pure Al was infiltrated into mixtures of Mg and $Al_2O_3$ powder, processing temperature required to spontaneous infiltration was decreased and critical processing temperature and Mg content were $700^{\circ}C$ and 3wt% respectively. The content of Mg was found the most powerful variable for infiltration of molten Al. The infiltration ratio increased with Mg content and processing temperature, however the $Al_2O_3/Al$ composites which were fabricated by high Mg content and processing temperature resulted in non uniform dispersion of $Al_2O_3$ particles by excessive interfacial reaction. XRD pattern indicated that $MgAl_2O_4$ and AIN was observed at the interface of $Al_2O_3$ particles and in the Al matrix as reaction products.

• Journal of Hydrogen and New Energy
• /
• v.7 no.2
• /
• pp.181-191
• /
• 1996

Samples with the compositions of Mg-10wt.%Ni and Mg-25wt.%Ni were prepared by mechanical alloying in a planetary mill. $Mg_2Ni$ phase was formed in the mixture with hydriding dehydriding cycling. The activation of Mg-10wt.%Ni and Mg-25wt.%Ni was completed after n=7 and n=6 around, respectively, at 583K, $0{\sim}8barH_2$. Mg-10wt.% Ni and Mg-25wt. %Ni are considered as excellent hydrogen-storage materials with very high hydriding rates, high dehydriding rates and relatively large hydrogen-storage capacity. The effets of mechanical alloying and hydriding dehydriding cycling are considered the augmentation in the density of active nucleation sites and the diminution in the particle size.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2009.08a
• /
• pp.402-402
• /
• 2009

• Proceedings of the Korean Vacuum Society Conference
• /
• 2009.08a
• /
• pp.404-404
• /
• 2009

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2006.05a
• /
• pp.38.1-38.1
• /
• 2006

• Applied Chemistry for Engineering
• /
• v.17 no.2
• /
• pp.210-216
• /
• 2006

The concentrations of 16 priority PAHs (US EPA standard) were analyzed in the surface sediments obtained from 23 sampling sites near Kwangyang Bay in Korea. There was a local variability in the total PAHs ranged from 0.01 to 171.39 mg/kg, with a mean value of $8.13{\pm}24.8mg/kg$. The major pollution sources of PAHs near Kwanyang Bay were Taeindo, Sueo stream and Wallae stream, whose concentrations were 114.81, 38.37 mg/kg and 19.05 mg/kg, respectively. It showed that PAHs concentrations were increased with the decrease of particle size and with the increase of organic carbon contents in three fractioned sediments. From the analysis of PAHs source using LMW/HMW, Phe/Ant, and Fla/Pyr, pyrolysis by-products were mostly showed in Kwangyang Bay and some place showed the mixure of pyrolysis by-products, and crude oil by-products. Besides, the toxic effects assessment on benthic ecosystem for three major pollution sources showed that the PAHs concentration of Taindo which was mainly accumulated with carcinogenic PAHs exceeds ERM value and the PAHs of Sueo and Wallae streams are the degree of ERL value.