• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.1
• /
• pp.30-33
• /
• 2006

Transparent indium tin oxide (ITO) anode surface was modified using $O_3$ Plasma and organic ultrathin buffer layers were deposited on the ITO surface using 13.56 MHz RF plasma polymerization technique. The EL efficiency, operating voltage and lifetime of the organic light-emitting device (OLED) were investigated in order to study the effect of the plasma surface treatment and role of plasma polymerized organic ultrathin buffer layer. Poly methylmethacrylate (PMMA) layers were plasma polymerized on the ITO anode as buffer layer between anode and hole transport layer (HTL). The plasma polymerization of the organic ultrathin layer were carried out at a homemade capacitive-coupled RF plasma equipment. N,N'-diphenyl-N,N'(3- methylphenyl)-1,1'-diphenyl-4,4'-diamine (TPD) as HTL, Tris(8-hydroxyquinolinato) Aluminum $(Alq_3)$ as both emitting layer (EML)/electron transport layer (ETL), and aluminum layer as cathode were deposited using thermal evaporation technique. Effects of the plasma surface treatment of ITO and plasma polymerized buffer layers on the OLED performance were discussed.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1347-1348
• /
• 2007

In this paper, ITO gate electrode surface was modified using $O_2$ plasma and organic gate insulating layers were deposited on the ITO surface using plasma polymerization technique. In order to investigate the influence of the plasma coupling method and plasma conditions on the plasma polymerized methyl methacrylate (ppMMA) thin film properties, inductively coupled (ICP) and capacitively coupled plasma (CCP) were used to generate the plasma and the plasma parameters were varied. The ppMMAs were investigated using atomic force microscopy (AFM) and a Fourier Transform Infrared (FT-IR) spectroscopy. Dielectric constants of the ppMMA thin films were investigated using a impedance analyzer (HP4192A, LF Impedance Analyzer). Current-Voltage (I-V) characteristics of the organic thin film transistors (OTFTs) were investigated using a source measurement unit (SMU: Keithley 2612). Proposed method can be applied to dry-process to fabricate OTFTs during overall fabricating steps.

• Bulletin of the Korean Chemical Society
• /
• v.7 no.3
• /
• pp.196-200
• /
• 1986

The solvent change and salt do not affect the fluorescence quantum yield of 1,3-dimethylnaphtho[1,2-e]uracil indicating the considerable energy gap between the lowest singlet $({\pi},\;{\pi}^{\ast})\;and\;(n,\;{\pi}^{\ast})$ states in the compound. The results are consistent with the strong quenching of fluorescence by ethyl iodide. Fluorescence quantum yield is nearly independent of temperature, probably due to the relatively inefficient internal conversion. Unusual spectral difference is observed in isopentane and ethanol at 77K. The temperature dependence of emission in isopentane and in ethanol suggests that the increase of charge transfer character by the conformational change in isopentane leads to the structureless and red-shifted fluorescence, while in ethanol the decrease of the charge transfer character by the hydrogen bonding interaction results in the structured and blue-shifted fluorescence along with phosphorescence at the low temperature. Temperature dependence of emission in poly(methylmethacrylate) matrix indicates that $T_1{\to}S_0$ radiationless decay is an important process responsible for the strong temperature dependence of phosphorescence.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.12 no.1
• /
• pp.171-179
• /
• 1990

This is a report on a case of delayed reconstruction after partial mandibularectomy for Ameloblastoma involving symphysis and bodies of the mandible by using of two large pieces of corticocancellous bone blocks obtained from both iliac crests. The authors failed immediate reconstruction with two kinds of Alloplasts(metal, methylmethacrylate) at two times of trial due to known infection and suggestive poor histocompatibility of materials aginst the host who has been suffered from long-term and active pulmonary tuberculosis. However we could get success late reconstruction of this problem-occured and curved area with two pieces of large corticocancellous blocks by using of miniplate osteosynthesis and biphasic external pin fixation. From our experience we are obtained some results as follows : 1. Alloplastic graft materials seemed to be dangerous to maintain successfuly in patient who has a long-term debilitating disease as a active pulmonary tuberculosis. 2. Biphasic external skeletal pin fixation appliance gave many advantages such as maintain functional position of the remained bodies and condyles of the mandible after removal of failed alloplasts and during control of inflammation of this area, assist supportive roles to fix and maintain bone grafts during healing, allow mandibular movement during healing and so offer to conduct normal functional stimuli to bone grafts during osteogenesis etc. 3. Bony union was successful between not only normal bones and grafted bones but also grafted bone pieces even though we used two pieces of large blocks of corticocancellous bone for graft. 4. Miniplate osteosynthesis was not affect any adverse effects to bone grafts but offered good role of fixation and maintenance for bone grafts.

• Journal of Adhesion and Interface
• /
• v.11 no.4
• /
• pp.174-180
• /
• 2010

The effect of carbon nanotube surface treatment on the interface and thermal conductivity of carbon nanotube-based poly(methylmethacrylate) (PMMA) composites was investigated. Coagulation and atomic-transfer radical polymerization (ATRP) was applied to modify the surface of multi-wall carbon nano-tube. The composite of ATRP method used carbon nanotube showed the higher transparency and thermal conductivities than that of the coagulation method used. In comparison to the thermal conductivity of pure PMMA, 0.21 W/mK, the ATRP carbon nanotube used PMMA/MWNT composite showed a thermal conductivity of 0.38 W/mK. The interface between carbon nanotube and PMMA was observed by scanning electron microscope and uniform dispersion of carbon nanotube was observed without any void in the PMMA matrix. It may be beneficial to transport the phonon without any scattering and it may result in a higher thermal conductivity.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.366-366
• /
• 2012

무기물 나노입자를 포함한 유기 박막인 나노 복합체를 사용하여 제작한 비휘발성 메모리 소자는 공정의 간단함과 낮은 전력구동이 가능하다는 장점 때문에 차세대 비휘발성 메모리 소자로 각광받고 있다. 다양한 나노입자를 포함한 유기 박막을 사용한 비휘발성 메모리 소자에 대한 연구는 많이 진행되었지만, 코어-쉘 나노입자가 poly (methylmethacrylate) (PMMA) 유기 박막에 분산되어 있는 나노 복합체를 활성층으로 사용하여 제작한 비휘발성 유기 메모리 소자의 전기적 특성과 메모리 메커니즘에 대한 연구는 비교적 미미하다. 본 연구에서는 코어-쉘 나노 입자가 PMMA 박막 안에 분산되어 있는 나노복합체를 사용한 비휘발성 메모리 소자를 제작하여 전기적 특성, 정보 유지력 및 메모리 스위칭 동작에 대하여 관찰 하였다. 소자 제작을 위해 hexane 안에 들어 있는 코어-쉘 나노입자를 Chlorobenzene에 용해되어 있는 PMMA에 넣어 초음파 교반기를 사용하여 나노입자를 고르게 분산하였다. 코어-쉘 나노입자가 PMMA에 고르게 분산 된 용액을 전극으로 사용 할 Indium-tin-oxide가 성장된 glass 위에 스핀코팅을 한 후 열처리를 하여 용매를 제거한 후 코어-쉘 입자가 PMMA에 분산되어 있는 박막을 형성하였다. 코어-쉘 입자가 PMMA에 분산된 나노복합체 위에 Al을 상부전극으로 열 증착하여 비휘발성 메모리 소자를 제작하였다. 제작된 소자의 전류-전압 (I-V) 특성을 측정결과는 특정한 두께에서 낮은 전도도 (ON state)와 높은 전도도 (OFF state)가 존재하는 쌍안정성 특성을 확인하였다. 코어-쉘 나노입자가 포함되지 않은 소자에서는 쌍안정성 특성이 보이지 않아 코어-쉘 나노입자가 비휘발성 메모리 소자의 기억 특성을 나타내는 중요한 저장 매체가 됨을 알 수 있었다. 제작된 메모리 소자의 메모리 동작에 대한 메커니즘 설명은 I-V와 에너지 밴드 구조를 사용하여 설명할 것이다.

• The Journal of the Korean bone and joint tumor society
• /
• v.1 no.1
• /
• pp.52-59
• /
• 1995

Metastatic cancer is the most common tumor of the skeleton. The prevalence of pathologic fracture may increase as patient survival is prolonged by improved cancer therapy. With recent advances in orthopaedic procedure and medical management of terminal cancer patients, it is generally agreed that aggressive treatment should be undertaken for patient with pathologic fracture secondary to metastatic disease, and a team approach should be utilized. The authors have reviewed twenty cases of pathologic fracture of the long bone due to metastatic tumor treated in the Department of Orthopedic Surgery, Yonsei University College of Medicine, from April 1989 to April 1994 and the following results were obtained. 1. The mean age at surgery was 58.4 years (ranged from 24years to 86years) and among 20 cases, 10 cases were male and the others were female. 2. The most frequent site of pathologic fracture in long bone is femur(15 cases, 75%), and followed by humerus(4 cases, 20%), tibia(1 case). 3. The frequently encountered primary tumors that metastases to long bone are those of the lung(7 cases, 35%), breast(4 cases, 20%), and prostate(2 cases, 10%). 4. The operative procedure was performed by resection of the tumor mass extensively, and we used polymethylmetacrylate for filling the dead space after resection, in all cases. 5. The mean survival period after operation is 9.2 months(ranged from 1 month to 4 years and 9 month). 6. The results of postoperative pain relief status were graded as fair to excellent in 17 cases(85%).

• Polymer(Korea)
• /
• v.34 no.2
• /
• pp.154-158
• /
• 2010

We first synthesized N-phenylcyclotrisiloxazane ($D_3^{NPh}$) through a cyclization of $\alpha$,$\omega$- dichlorohexamethyltrisiloxane with aniline and prepared poly(dimethylsiloxane-co-N-phenylsiloxazane) copolymer (PDMS-NPSOX) by a ring opening copolymerization of them with hexamethylcyclotrisiloxane $D_3$. An acrylate monomer modified with PDMS-NPSOX was synthesized by using chloroethyl methacrylate and copolymerized with methylmethacrylate (MMA) and n-butylacrylate. The composition of the copolymer was chosen to control their glass transition temperature ($T_g$) to 25 $^{\circ}C$. By changing the comonomer from PDMS to PDMS-NPSOX, $T_g$ and adhesive strength of the copolymer were increased from 20 to 25 $^{\circ}C$ and from 1.76 to 2.23 N/cm, respectively.

• Archives of Plastic Surgery
• /
• v.33 no.5
• /
• pp.659-662
• /
• 2006

Purpose: Alloplastic implants, such as methylmethacrylate, Teflon, silicone, Supramid are commonly used to cover the floor defect and to prevent reherniation of the displaced orbital tissue in orbital floor fracture. Silicone implant has been used for reconstruction of orbital wall defects because of pliability, advantage of carving and chemically inert nature. However, silicone implant also has complications including infection, extrusion, pain, dystopia and tissue reaction. Cyst formation around the silicone implant is a very rare complication. According to many reports, cysts around alloplastic implant in an orbital area are mostly hemorrhagic cysts consisted of blood breakdown product with fibrous capsule cell in histologic examination. Methods: The authors report atypical case and successful treatment of intraorbital hemorrhagic cyst around silicone implant of a 37-year-old male patient. Results: Preoperative symptoms of diplopia, exophthalmos, proptosis, vertical dystopia and ectropion of lower eyelid were resolved after surgical removal of implants with surrounding capsule. Conclusion: Clinical suspicion of plastic surgeon is important in diagnosis of intraorbital cyst of patients who have history of silicone implantation and computed tomography is the standard tool of diagnosis. During the operation, caution must be taken on delivering the whole capsule of intraorbital cyst along with silicone implant to prevent recurrence of the cyst.

• Journal of Chest Surgery
• /
• v.30 no.3
• /
• pp.348-348
• /
• 1997

A 48 year old man, has been suffering from a growing chondrosarcoma of sternum which has deeply invading the anterior mediastinum: He underwent wide resection of the chest wall tumor including a 4 cm free margin of normal tissue on all portions. The tumor as 15 × 16× 10cm in size arising from sternum and include both proximal one third of the clavicle and the 1 st, 2nd, and 3rd coital cartilages. The resected skeletal defect in the anterior wall was very large after wide resection of the'tumor and reconstructed due to paradoxical chest wall movement with sandwich like method of double over lapping Marlex mesh and methylmethacreylate, and steel wires. The soft tissue reconstructive procedure was dont with myocutaneous flap transposition use of pectoralis muscle. But the patient go infected with tuberculosis in the mediastinum two months after the operation. We had removed all of previously inserted prosthetics and performed curettage and drainage. Recently we experienced a case with giant chondrosarcoma of the sternum associated with tuberculous mediastinitis. The patient had an uneventful postoperative course and was discharged with adjuvant treatment such as antituberculous medication for 1 year.