• 한국멀티미디어학회논문지
• /
• 제5권4호
• /
• pp.450-457
• /
• 2002

OFDM을 위한 기존의 채널추정기법들은 다양한 이동체의 속도에 대해 강건한 특성을 지니지 못 한다. 기존의 기법들에서 이런 단점을 극복하기 위해 타 기법들에 비해 우수한 성능 및 양호한 연산량을 보이는 기법을 제안한다. 제안된 기법은 PSAM이나 ESAE와 같은 기법들과 달리 전체 채널 내에 블록 프레임 구조를 이용한다. 이러한 개념은 발산을 하거나 나쁜 성능을 보이는 것을 막기 위한 것이며 성능 분석을 통해 제안된 기법이 기존의 기법들에 비해 모든 래일라이 페이딩 환경에서 MSE나 BER측면에서 우수한 성능을 보이는 것을 확인할 수 있었다. 실험 성능 및 연산량 비교를 통해 제안한 기법은 기존의 기법들보다 우수한 성능을 보였으며 매우 심한 페이딩 환경에서도 오차 마루를 보이지 않는 특성을 보였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집 특별세미나,특별/일반세션
• /
• pp.259-264
• /
• 2009

This paper proposes a real-time estimation of the boost inductance in a single-phase AC/DC parallel PWM converter for high-speed EMU. The estimation procedure of the boost inductance is only based on the variation of input current and the input AC voltage measurement. The estimated boost inductance is optimized by the least square method. This estimation technique can improve the performance of current controller and reduce the harmonics of the input current in the feed-forward controller. The validity of proposed technique is verified through the MATLAB SIMULINK simulation results.

• 한국음향학회지
• /
• 제43권3호
• /
• pp.314-323
• /
• 2024

최근 해양 포유동물의 수동 음향 추적을 위해 스코어-패널티 법이 사용되고 있다. 전통적인 시간영역 정합장 처리 기법은 손실함수에 측정신호와 손실신호간의 정합도만을 고려하는 반면, 스코어-패널티법은 측정 신호와 모의신호의 비적합도를 반영하는 페널티 항도 추가로 고려한다. 본 연구에서는 스코어-패널티법을 파형을 알고 있는 수동표적의 심도 추정에 적용했다. 수중 음속 구조의 불확실성을 갖는 심해 환경을 가정하고, 스코어-패널티법의 성능을 평가했다. 또한 시간영역 정합장 처리기법의 결과와 서로 비교했다. 약한 수중 음속 오정합 환경에서 스코어-패널티법은 시간영역 정합장 처리기법보다 높은 정확도를 보이고 효율적으로 동작했다. 그렇지만 수중 음속 구조의 오정합이 매우 큰 경우에는 두 기법 모두 표적의 심도 추정에는 실패했다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 추계학술대회 논문집
• /
• pp.3-6
• /
• 2002

In a conventional speed sensorless stator flux-oriented(SFO) induction motor drive system, when the estimated speed is transformed into the sample-data model using the first-forward difference approximation, the sampled data model has a modeling error which, in turn, produces an error in the rotor speed estimation. The error included in the estimated speed is removed by the use of a low pass filter (LPF). As the result, the delay of the estimated speed occurs in transients by the use of the LPF This paper investigates the problem of a conventional speed sensorless SFO system due to the delay of estimated speed in the filed weakening region. In addition, this paper proposes a method to estimate exactly speed by using Luenberger observer, The proposed method is verified by experiment with a 5-hp induction motor drive.

• Journal of Electrical Engineering and Technology
• /
• 제8권5호
• /
• pp.1040-1048
• /
• 2013

In this paper, a sensorless pitch angle control method for a wind generation system is suggested. One-step-ahead prediction control law is adopted to control the pitch angle of a wind turbine in order for electric output power to track target values. And it is shown that this control scheme using the inverse dynamics of the controlled system enables us to predict current wind speed without an anemometer, to a considerable precision. The inverse input-output of the controlled system is realized by use of an artificial neural network. The proposed control and wind speed prediction method is applied to a Double-Feed Induction Generation system connected to a simple power system through computer simulation to show its effectiveness. The simulation results demonstrate that the suggested method shows better control performances with less control efforts than a conventional Proportional-Integral controller.

• 한국항행학회논문지
• /
• 제24권2호
• /
• pp.101-106
• /
• 2020

유도전동기의 속도 제어를 원활하게 수행하기 위해서는 필요한 회전자 속도 정보를 얻어야 한다. 속도 정보를 얻으려면 센서를 사용하여 얻어야 하지만, 센서를 사용하지 않고 적절한 알고리즘을 이용하여 얻을 수도 있다. 속도 정보를 얻기 위해서 모델 기준 적응 시스템(MARS; model reference adaptive system)을 사용하여 시스템을 설계 하였고, 유도전동기의 속도 제어 방식 중에 하나인 간접 벡터 제어 방식으로 전동기의 전류와 회전자 파라미터 값으로부터 연산된 슬립 주파수를 회전자 속도와 합하여 자속의 위치 정보를 얻어내는 방식을 사용하였다. 실제 자속 정보 없이도 넓은 속도 영역에서 간단하게 순시 전류 제어를 행할 수 있으며 제어기의 구조가 간단하다는 장점을 가질 수 있다. 따라서 본 논문에서는 간접 벡터 제어 방식을 기반으로 제어 시스템을 구성하였고, 이를 실현하기 위해 필요한 회전자 속도 정보를 센서로 사용하지 않고 개발한 지능형 알고리즘으로 추정하여 유도전동기의 속도 제어 시스템을 개발하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제20권4호
• /
• pp.20-26
• /
• 1996

Recently, for the speed control of a diesel engine, some methods using the modern control theory such as LQ control technique, or $\textit{H}_{\infty}$control theory etc., have been reported. However, most of speed controlers of a diesel engine ever developed are still using the PID control algorithm. And, as another approach to the speed control of a diesel engine, the authors proposed already a new method to adjust the parameters of the PID controller by a model matching method. In the previous paper, the authors confirmed that the proposed new method is superior to Ziegler & Nichols's method through the analysis of results of the digital simulations under the assumption that the parameters of a diesel engine are known exactly. But, actually, it is very difficult to find out the value of parameters of a diesel engine accurately. And the parameters of a diesel engine are changigng according to the operating condition of a diesel engine. So, in this paper, a method to estimate the parameters of the PID controller for the speed control of a diesel engine by means of the model matching method are proposed. Also, the digital simulations are carried out in cases either with or without measurement noise. And this paper confirms that the proposed method here is superior to Ziegler & Nichols's method through the analysis of the characteristics of indicial responses.

• Journal of Advanced Marine Engineering and Technology
• /
• 제17권2호
• /
• pp.29-35
• /
• 1993

Recent marine propulsion diesel engines tend to become slower in speed and longer in stroke for the higher engine efficiency, and in these long stroke and slow speed engines the digital governors are highly recommended to be used. But, in the present digital governors only the feedback of the engine rpm-signal is used for the engine speed control. If the load torque of the engine can be measured or estimated and the torque feedback loop is added to the present digital governor, it is expected that the speed control performance of the digital governor will be highly improved. In this paper, a new method is proposed to estimate the load torque of the diesel engine from the measured signals of fuel oil and rpm. And it is also suggested that the Kalman filter can be used for the estimation of engine torque.

• 플랜트 저널
• /
• 제8권1호
• /
• pp.50-59
• /
• 2012

The current dual-watchdog estimation system has individually calculated the construction, the engineering and the procurement cost. The dual-watchdog estimation system is inefficient and prolonged estimation period because of the lack of the interoperability and the difference of material unit cost and construction unit cost. In order to resolve this problem, new estimation software was developed. The estimation software is developed by making up for the weak points in existing estimation method. The cost data with the same standard is the key point. And this software enhanced accuracy and speed of the data search in stylized estimation standard. A summary of the construction, the engineering and the procurement cost was generated in this estimation software. The unit rate about the labor cost, equipment and expense through a sheet was handled. The developed estimation software has five categories on engineering cost, procurement cost, construction cost and subcontractor management sheet. In this study, the estimation software to supplement the faults of the existing estimation method was developed. And estimation software on petrochemical projects increases an efficiency of the estimation work.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.768-772
• /
• 2001

The paper deals with the control of the synchronous reluctance machine without position sensor. A method for the computation of the transformation angle out of terminal voltages and currents is presented. The injection of test signals allows operation at zero speed. Fundamental for this control scheme is the exact modelling of the machine, where especially the saturable inductances are of central interest. The accuracy of the angle estimation method over the whole operating range including field-weakening is discussed in detail. The implementation of the angle estimation method in a rotor-oriented control scheme and practical results are demonstrated.