• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.381-385
• /
• 2006

This research introduces easy tool manufacturing method regarding tool manufacturing procedure. In the conventional method, wire cutting machining and lapping operation of corner and render region were performed after shrink-fitting to ensure the accuracy of gear profile. But lapping operation is very difficult due to corner and render is located deep inside of die. In this research, wire cutting operation was performed after $1^{st}$ ring was shrink-fitted to ease lapping operation and increase the accuracy of corner radius. Before $2^{nd}$ ring fitting, lapping was completed. Elastic deformation amount due to $2^{nd}$ ring fitting and cold forging was calculated through finite element analysis and wire cutting specification was offset in that amount. Comparison of gear dimension between analysis and forged part ensures the validity of new manufacturing methods.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1681-1688
• /
• 2011

The platform screen door open-close mechanisms at today's subway are divided by "Radio Frequency method" and "Method at entrance perception sensor". In the case of "method at entrance perception sensor", there happen a lot of occasions of malfunctioning that may cause problems in terms of timeliness, swiftness and reliability of train operation and even ends up to train operation stop since the perceiving process is complicated and it is prone to have dust on lenses, position alteration by train vibration, and less reflection light in the case of new train. In this study, we find how to minimize possible problems in terms of maintenance during train operation period, and seek its alternatives in order not only to have no malfunction in perception but also to cause no disturbance in train operation through dealing organically when perceiving door open-close to minimize delay time.

• 전력전자학회논문지
• /
• 제27권4호
• /
• pp.339-347
• /
• 2022

This study proposes the mitigation method for overcurrent and oscillation motor current in an active short-circuit operation. This operation is attracting attention as the safe state of electric vehicle traction inverters. However, the active short-circuit operation generates oscillation and overcurrent of motor currents during a transient state. The proposed method uses two different safe states in PMSM, such as active short circuit and freewheeling. The active short circuit is used for safe state in a steady state. To reduce the overshoot and oscillation, a freewheeling state is injected between active short-circuit operation by comparing the motor phase current with an analytically calculated steady-state motor current. Freewheeling state is only used in a transient state. The performance is demonstrated through simulations and experimental results. The peak current of the motor was reduced from 52 A to 40 A, and oscillation time was reduced.

• 품질경영학회지
• /
• 제10권2호
• /
• pp.2-9
• /
• 1982

In principle the methods of increasing the reliability of complex system can be classified into the following four basic methods: (1) using the stand-by redundancy; (2) decreasing the failure rate of the system; (3) decreasing the time of continuous operation; (4) decreasing the mean repair time. Among the above four methods, it is generally known that the method of stand-by redundancy is the most effective general, to increase the reliability of systems. Therefor this paper aims to compare the gain in reliability which is achieved by applying stand-by redundancy with other methods, and to show the characteristics of each method From the comparison of the methods of increasing reliability, the following important facts are found: When the method of stand-by redundancy is used to increase the reliability of complex systems intended for long-term operation, a hight multiplicity of stand-by redundancy is required. Thus an increase of the reliability of complex system by applying stand-by redandancy is realized at the expense of characteristics such as weight, size, cost, increased complexity of operation conditions. And this property restricts its use in systems which are critical with respect to weight, size, cost or operation conditions. The method of stand-by redundancy is the most effective when this method is used to increase the reliability of complex systems intended for short-term operation, and the method of decreasing failure rate is the most effective when it is used to increase the reliability of systems intended for long-term use. The methods of increasing reliability discussed in this paper make it possible to make highly reliable systems. But it is not possible to make a highly reliable system using a single method of increasing reliability, even if it is the most effective one. Therefore it is recommended to use all or a majority of the above four methods by choosing it in accordance with the properties of the system under construction.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2004년도 춘계학술대회 논문집
• /
• pp.393-397
• /
• 2004

대규모의 시스템은 운영상 복잡성을 심화시키고, 하위 시스템간의 간섭도를 증가시킨다. 본 논문에서는 이러한 문제의 해결방안으로 떠오르고 있는 자율 분산형 시스템을 컨테이너 터미널이라는 대규모 시스템에 적용하였다. 컨테이너 터미널의 운영체계를 이해하고 이에 적절한 자율 분산형 시스템을 제안하였다. 또한 현재의 컨테이너 터미널 운영체제의 문제점을 도출해내고, 이에 대한 해결책을 자율분산형 시스템에서 찾아내었다. 마지막으로, 제안된 자율 분산형 컨테이너 터미널 시스템 각각의 서브시스템 기능을 정의하고, 이 시스템에서의 운영방안을 장비들의 작업계획에 중점을 두고 흐름도로 나타내었다.

• 한국생산제조학회지
• /
• 제19권2호
• /
• pp.295-300
• /
• 2010

Inconel 718 alloy, widely used as material of aircraft engine, has a good mechanical property in high temperature, strong anti-oxidation characteristics in oxidated current over $900^{\circ}C$, and also is not easily digested in the air containing sulfur, therefore, its usage as mechanical component is expanding rapidly. Even though Inconel alloy 718 is difficult to machine, it requires highly precise processing/machining to sustain its component quality of high accuracy. In this paper, general turning operation conditions arc tested to select the best cutting process condition by measuring surface roughness through implementing experiments with orthogonal array of cutting speed, feeding speed and cutting depth as processing parameters based on the Taguchi method. Optimal turning operation conditions are extracted from the proposed experimental models.

• 항공우주기술
• /
• 제9권1호
• /
• pp.98-105
• /
• 2010

고속푸리에변환(Fast Fourier Transform)은 이산푸리에변환(Discrete Fourier Transform)의 주기적으로 반복되는 연산을 생략하여 그 속도를 향상시킨 연산방법이다. Radix-2 FFT는 그 정의에 따라 함수 재귀호출에 의해 구현될 수 있는데 이 방법은 스택복사 과정의 시간소모 때문에 고속동작이 어렵게 된다. 이를 극복하기 위해 신호점을 연산순서에 맞게 미리 재배열하고 배열된 신호점을 나비연산하는 방법으로 고속연산을 구현할 수 있다. 이 논문은 신호점 재배열 방법에 의한 Radix-2 FFT의 고속연산에 착안하여 Radix-3 FFT에 신호점 재배열 방식을 적용해 보고 그 타당성에 관해 고찰하였다.

• 한국수자원학회논문집
• /
• 제31권1호
• /
• pp.105-113
• /
• 1998

홍수기 중 저수지 운영은 이수와 치수를 고려한 전반적인 홍수기 저수지 운영확 홍수예측시 임의의 저수지 수위에서의 홍수시 저수지 운영으로 구분할 수 있다. 본 연구는 홍수시 저수지운영에 관한 것으로 전반적인 홍수시 저수지 운영방안에 관해 논의하고자 한다. 현행의 홍수시 저수지 운영을 위해서는 확보된 홍수조절용량을 토대로 각종 수문모형의 불확실성과 기술적인 한계, 제약조건 등을 고려한 양적인 홍수조절 방안이 마련되어야 한다. '저수지 홍수변환법'은 이러한 양적인 홍수조절 방안중의 하나로 무피해방류량 이상의 홍수유입량에 대해 댐의 안전을 고려하여 적절한 방류량을 결정하는 일련의 절차이다. 본 연구에서는 기 발표된 '저수지 홍수변환법'에 대한 보충설명과 함께 전반적인 홍수시 저수지 운영방안을 논의하였다.

• Journal of Electrical Engineering and Technology
• /
• 제13권3호
• /
• pp.1173-1184
• /
• 2018

The lifetime of a lithium-ion battery is one of the most important issues of the energy storage system (ESS) because of its stable and reliable operation. In this paper, the lifetime management method of the lithium-ion battery for energy storage system is proposed. The lifetime of the lithium-ion battery varies, depending on the power usage, operation condition, and, especially the selected depth of discharge (DOD). The proposed method estimates the total lifetime of the lithium-ion battery by calculating the total transferable energy corresponding to the selected DOD and achievable cycle (ACC) data. It is also demonstrated that the battery model can obtain state of charge (SOC) corresponding to the ESS operation simultaneously. The simulation results are presented performing the proposed lifetime management method. Also, the total revenue and entire lifetime prediction of a lithium-ion battery of ESS are presented considering the DOD, operation and various condition for the nations of USA and Korea using the proposed method.

• 한국자동차공학회논문집
• /
• 제20권6호
• /
• pp.61-66
• /
• 2012

Conventional method to transform vehicle driving condition to engine operation mode is to use vehicle road load under neutral gear and mechanical efficiency of drivetrain. But this method requires additional measurement of efficiency of drivetrain on a test rig. And this measurement is normally done at fixed speed and thus estimated accuracy of engine operation mode is not considered to be high enough. This study suggests new method to calculate engine operation mode for prescribed driving mode such as NEDC using vehicle coastdown test under gear engaged condition without measurement of mechanical efficiency of drivetrain. Coastdown test was done under neutral and gear engaged condition for comparison and also trial to extract mechanical loss of drivetrain was carried out. Calculated engine torque by conventional and newly suggested method was compared with actually measured torque of a vehicle on a chassis dynamometer during NEDC. Newly suggested method showed slightly higher accuracy of accumulated brake work during NEDC.