• Bulletin of the Korean Chemical Society
• /
• v.15 no.10
• /
• pp.852-856
• /
• 1994

A series of aliphatic hydrocarbons, methane to hexane in the liquid state, are modeled with the molecular mechanical potential parameters treating all hydrogen degrees of freedom explicitly. Thermodynamic properties (heat capacities and heats of vaporization) are calculated from relatively short (20ps) molecular dynamics trajectories. The liquid state structures are also examined through various radial distribution functions. Molecular dynamics simulations reproduce experimentally measured properties within a few percent errors, thus indicate that the present set of all-hydrogen parameters is suitable for simulating macromolecular systems in bulk.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.622-625
• /
• 2005

본 연구의 목적은 동해 울릉분지 천부퇴적층의 공극수와 메탄의 특징 및 상호작용을 규명하는데 있다. 울릉분지에서 채취한 코어에서 공극수를 추출하여 분석한 결과, 공극수의 황산염 농도가 퇴적물의 심도가 증가할수록 감소하며, 감소하는 경향은 크게 세 가지 (직선성, concave down, upward kink)로 나뉨을 알 수 있었다. 이는 모든 코어에서 황산염 환원작용이 일어나고 있음을 지시한다 황산염 농도의 수직적 구배를 이용하여 SMI (sulfate-methane interface) 심도를 계산하면, 남부울릉분지가 북부울릉분지보다 낮은 값을 갖는다. 반면에 메탄 농도는 퇴적물의 심도가 증가할수록 전반적으로 증가하며, 공간적으로는 남부 울릉분지가 북부울릉보지보다 높다. 또한 남부울릉분지에서 메탄가스 농도는 SMI 심도 아래에서 급격히 증가한다 메탄가스의 탄소 안정동위원소$(\delta^{13}C)$ 분석 값들은 대부분 $-60\%_{\circ}$이하로서 이는 메탄가스가 열기원 보다는 박테리아기원임을 지시해준다 또한 남부 울릉분지에서 메탄의 탄소 안정동위원소 분석 값들은 메탄농도가 증가할수록 낮은 값을 보여 주는 데 이러한 결과들은 남부 울릉분지에서 무산소 메탄 산화작용이 일어나고 있음을 지시하고, 메탄의 상향 분산 (diffusion)량이 북부 울릉분지보다 많이 일어난다는 것을 의미한다. 공극수내 황산염 이온 농도 구배와 메탄가스 농도를 종합적으로 고려할 때, 울릉분지에서 가스하이드레이트의 부존가능성은 북부 울룽분지보다 남부 울릉분지가 높은 것으로 추정된다.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.11
• /
• pp.1593-1597
• /
• 2000

In the quiescent state, cattle-manure slurry stratifies into three discernible layers, namely a floating scum layer, a bottom sludge layer and a watery middle layer. The proportions of top (scum), middle and bottom (sludge) layers were approximately 20, 60 and 20% respectively of the volume of the whole slurry. Particulate matter from the different stratified layers was characterised for particle size distribution and cellulose, hemicellulose and lignin composition. Total solids concentrations of top, middle and bottom layers were 12.7, 2.8 and 7.4% respectively. Larger particles were found in the top layer compared with the bottom. The top layer contained the highest amounts of Neutral Detergent Fibre (NDF), Acid Detergent Fibre (ADF), cellulose and hemicellulose, but the lowest amount of Total Kjeldahl Nitrogen (TKN). The bottom layer contained the highest amounts of Acid Detergent Lignin (ADL) and TKN. With increase in particle size, there were increases in NDF, ADF, cellulose and hemicellulose, accompanied by decreases in ADL and TKN. Biochemical methane potential of the three layers was also measured. The top layer was found to produce the most methane with the middle layer producing the least. Biomethanation rate from the top layer was also the highest. Differences in biomethanation rates and biochemical methane potential were attributed to differences in chemical composition of the particulate matter. About 48%, 23% and 30% of the total chemical oxygen demand (COD) in the top, middle and bottom layers respectively of the slurry was found to be degradable.

• Journal of Sensor Science and Technology
• /
• v.19 no.6
• /
• pp.462-468
• /
• 2010

A low power gas sensor with microheater was fabricated by MEMS technology. In order to heat up the gas sensing material to a operating temperature, a platinum(Pt) micro heater was built on to the micromachined Si substrate. The width and gap of microheater were $20\;{\mu}m$ and $4.5\;{\mu}m$, respectively. ZnO nanowhisker arrays were fabricated on a sensor device by hydrothermal method. The sensor device was deposited with ZnO seeds using PLD systems. A 200 ml aqueous solution of 0.1 mol zinc nitrate hexahydrate, 0.1 mol hexamethylenetetramine, and 0.02 mol polyethylenimine was used for growthing ZnO nanowhiskers. The power consumption to heat up the gas sensor to a operating temperature was measured and temperature distribution of sensor was analyzed by a Infrared Thermal Camera. The optimum temperature for highest sensitivity was found to be $250^{\circ}C$ although relatively high(64 %) sensitivity was obtained even at as low as $150^{\circ}C$. The power consumption was 72 mW at $250^{\circ}C$ and was only 25 mW at $150^{\circ}C$.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.20-23
• /
• 2011

The spray and atomization characteristics of swirl coaxial injectors which use gas methane and LOx as propellants are investigated experimentally with a recess length variation. Mass distribution and spray angle are measured by a patternator and droplet size to find atomization characteristics are measured by GSV(Global Size and Velocity) system. As a result, when the liquid sprayed, the spray angle decreased and the atomization characteristic was improved with the recess length increase. When the gas and liquid injected simultaneously, the spray angle was decreased and the atomization characteristic was improved comparing to only the liquid injection.

• Journal of Distribution Science
• /
• v.15 no.10
• /
• pp.29-39
• /
• 2017

Purpose - The purpose of this study is to promote sales of the renewable energy industry and to advance into the Southeast Asian market. Research design, data, and methodology - This study is to develop a highly efficient food waste treatment system for Southeast Asian renewable energy industry. The radiation treatment method was applied for this purpose. Results - To investigate effects of ionization on removal of non-degradable organic matter, the results from gamma irradiation and co-digestion process was compared to those from a co-digestion process. Based on the BMP test results, food wastes were oxidized by hydroxyl radicals, and the specific methane yield was 366 mL CH4/g VS. Methane composition was 82%. A WAS/food wastes co-digestion was developed for the treated of non-degradable organic matter in food wastes. The average efficiency of non-degradable organic matter were 92.2% using the food waste co-digestion. Conclusions - Performance of gamma irradiation and co-digestion process was superior to that of a co-digestion process (10-20%). This implies that food wastes can be high efficient co-digested by the gamma irradiation. It is believed that it will be possible to enter the Southeast Asian energy industry as a strategic technology in the overseas energy recovery industry.

• Korean Journal of Materials Research
• /
• v.29 no.5
• /
• pp.328-335
• /
• 2019

Nb-doped $TiO_2$(NTO) coated NiCrAl alloy foam for hydrogen production is prepared using ultrasonic spray pyrolysis deposition(USPD) method. To optimize the size and distribution of NTO particles based on good physical and chemical stability, we synthesize particles by adjusting the weight ratio of the Nb precursor solution(5 wt%, 10 wt% and 15 wt%). The morphological, chemical bonding, and structural properties of the NTO coated NiCrAl alloy foam are investigated by X-ray diffraction(XRD), X-ray photo-electron spectroscopy(XPS), and Field-Emission Scanning Electron Microscopy(FESEM). As a result, the samples of controlled Nb weight ratio exhibit a common diffraction pattern at ${\sim}25.3^{\circ}$, corresponding to the(101) plane, and have chemical bonding(O-Nb=O) at 534 eV. The NTO particles with the optimum weight ratio of N (10 wt%) show a uniform distribution with a size of ~18.2-21.0 nm. In addition, they exhibit the highest corrosion resistance even in the electrochemical stability estimation. As a result, the introduction of NTO coated NiCrAl alloy foam by USPD improves the chemical stability of the NiCrAl alloy foam by protecting the direct electrochemical reaction between the foam and the electrolyte. Thus, the optimized NTO coating can be proposed for excellent protection of NiCrAl alloy foam for hydrocarbon-based steam methane reforming(SMR).

• Geomechanics and Engineering
• /
• v.29 no.2
• /
• pp.145-154
• /
• 2022

Complex geological conditions have a great influence on the mining of coalbed methane (CBM), which affects the extraction efficiency of CBM. This investigation analyzed the complicated geological conditions in the Liujia CBM block of Fuxin. A geological model of heterogeneities CBM reservoirs was established to study the influence of strike direction of igneous rocks and fault structures on horizontal well layout. Subsequently, the dual-porosity and dual-permeability mathematical model was established, which considers the dynamic changes of porosity and permeability caused by gas adsorption, desorption, pressure change. The results show that the production curve is in good agreement with the actual by considering gas seepage in matrix pores in the model. Complicated geological structures affect the pressure expansion of horizontal wells, especially, the closer to the fault structure, the more significant the effect, the slower the pressure drop, and the smaller the desorption area. When the wellbore extends to the fault, the pressure expansion is blocked by the fault and the productivity is reduced. In the study area, the optimal distance to the fault is 70 m. When the horizontal wellbore is perpendicular to the direction of coal seam igneous rock, the productivity is higher than that of parallel igneous rock, and the horizontal well bore should be perpendicular to the cleat direction. However, the well length is limited due to the dense distribution of igneous rocks in the Liujia CBM block. Therefore, the horizontal well pumping in the study area should be arranged along the direction of igneous rock and parallel plane cleats. It is found that the larger the area surrounded by igneous rock, the more favorable the productivity. In summary, the reasonable layout of horizontal wells should make full use of the advantages of igneous rock, faults and other complex geological conditions to achieve the goal of high and stable production.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.64 no.4
• /
• pp.241-245
• /
• 2015

Energy Distribution Function in pure $CH_4$, $CF_4$ and mixtures of $CF_4$ and Ar, have been analyzed over a range of the reduced electric field strength between 0.1 and 350[Td] by the two-term approximation of the Boltzmann equation (BEq.) method and the Monte Carlo simulation (MCS). The calculations of electron swarm parameters require the knowledge of several collision cross-sections of electron beam. Thus, published momentum transfer, ionization, vibration, attachment, electronic excitation, and dissociation cross-sections of electrons for $CH_4$, $CF_4$ and Ar, were used. The differences of the transport coefficients of electrons in $CH_4$, mixtures of $CH_4$ and Ar, have been explained by the deduced energy distribution functions for electrons and the complete collision cross-sections for electrons. The results of the Boltzmann equation and the Monte Carlo simulation have been compared with the data presented by several workers. The deduced transport coefficients for electrons agree reasonably well with the experimental and simulation data obtained by Nakamura and Hayashi. The energy distribution function of electrons in $CF_4$-Ar mixtures shows the Maxwellian distribution for energy. That is, $f({\varepsilon})$ has the symmetrical shape whose axis of symmetry is a most probably energy.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.1996-2000
• /
• 2008

In autothermal reforming reaction, oxygen to carbon ratio (OCR) and steam to carbon ratio (SCR) are significant factors, which control temperature and carbon deposition into the reactor. The OCR is more sensitive than the SCR to affect the temperature distribution and reforming efficiency. In conventional operation, hydrocarbon fuel, steam, and oxygen was homogeneously mixed and injected into the reactor in order to get hydrogen-rich gas. The temperature was abruptly raised due to fast oxidation reaction in the former part of the reactor. Deactivation of packed catalysts can be accelerated there. In the present study, therefore, the effect of the oxygen distribution is introduced and investigated to suppress the carbon deposition and to maintain the reactor in the mild operating temperature (e.g., $700{\sim}800^{\circ}C$). In order to investigate the effect numerically, the following models are adopted; heterogeneous reaction model and two-medium model for heat balance.