• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.673-674
• /
• 2007

22.9KV-Y 배전선로의 특고압 수전설비에 계량장치로 부설되어 운영중인 계기용변성기 M.O.F(Metering Out Fit)는 계기용변압기와 계기용변류기를 하나의 상자 속에 수납한 것으로 전력량계와 조합시켜서 전력측정의 변성장치로 사용되고 있다. 계량장치로 사용되고 있는 계기용변성기는 고객과 공정거래확립을 위하여 상시 정해진 비오차 특성을 만족하여야 한다. 그러나 고객구내 수전설비에서 파급고장이 발생시 과전류로 인하여 계기용변성기의 권선에 큰 충격이 가해져 비오차 특성에 문제점이 발생하나, 이 비오차를 측정할 때는 현재 정전상태에서 측정이 가능하여 현실적으로 측정을 할 수 없다. 이에 전기를 사용하는 활선상태에서도 비오차 측정을 할 수 있는 개발품에 대하여 고찰하고자 한다.

• 전기학회논문지
• /
• 제61권1호
• /
• pp.155-161
• /
• 2012

The firmware upgrade, which is remotely performed, is an essential function in smart metering or AMI (Advanced Metering Infrastructure). In other words, the AMI software and firmware can be switched for maintaining and improvement without replacement of H/W devices in AMI environment. Also, if number and type of devices are increase, the demand of remote update service will be increased. Through the firmware upgrade service remotely, the electric power corporation may be able to benefit various fields. For example, there are to adapt more easily in many environments, real-time service and to cut maintenance costs. In this paper, we proposed to design an international level FUMS(Firmware Upgrade Management System) which includes requirement function, architecture and protocol related with DCU, Smart Meter.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2039-2041
• /
• 2001

According to the deregulation of governments in the world, the power industries of United State and European nations are proceeding remote meter reading and remote load control. But the core technology of multifunctional electronic meter implemented by programmable one-chip IC, which can be the right answer of ail the power industy's efforts is now still under development in the advanced countries. Implementation of smallest size, lowest price three-phase meter with features which enable distribution automation such as bidirectional communication. The three phase metering IC and meter can be used as metering, automatic meter reading and transformer monitoring. Prepayment billing system.

• 대한교통학회:학술대회논문집
• /
• 대한교통학회 1998년도 Proceedings The 4th International Transport Symposium
• /
• pp.79-90
• /
• 1998

The current increases in fuel price contribute to reducing level of congestion and air pollution. In this paper, this measure is compared with the congestion toll charge and the 10 'buje'(a $10\%$ demand control measure of registered vehicle i.e. each vehicle can not operate when its plate's last digit matches the last digit of the date). The purpose of our study is to give a priority order to various measures and to propose the win-win solution of Seoul for policy makers. We recommend the congestion toll charge coupled with some metering measures is the win-win solution for Seoul. Also we conclude a priority order such as metering; congestion toll charge; increase in parking fee; increase in fuel price; the 10 'buje' must be acceptable for implementation. Various ITS subsystems needed to support the proposed win-win solution are identified and field operational tests for them are introduced in this paper.

• 드라이브 ㆍ 컨트롤
• /
• 제12권3호
• /
• pp.44-51
• /
• 2015

In this study, a metering cylinder was constructed, and the velocity obtained from the linear velocity transducer (LVT) of the cylinder piston was used to evaluate the dynamic performance of an electro-hydraulic servovalve. Frequency response experiments involving the spool displacement and piston velocity (LVT signal) were conducted with different input signal amplitudes, hydraulic pipe diameters, and supply pressures. The spool displacement signal accurately reflected the performance of the servovalve. Meanwhile, the -3 dB bandwidth frequency of the LVT signal was similar to the spool displacement signal, except for a small-amplitude input signal, and the $-90^{\circ}$ phase lag bandwidth frequency showed some differences.

• 한국멀티미디어학회논문지
• /
• 제24권11호
• /
• pp.1461-1471
• /
• 2021

This paper presents a light exposure correction algorithm for less pleasant images, acquired with a light metering failure. Since conventional tone mapping and gamma correction methods adopt a function mapping with the same range of input and output, the results are pleasurable for almost symmetric distributions to their intensity average. However, their corrections gave insufficient outputs for asymmetric cases at either bright or dark regions. Also, histogram modification approaches show good results on varied pattern images, but these generate unintentional noises at flat regions because of the compulsive shift of the intensity distribution. Therefore, in order to sufficient corrections for both bright and dark areas, the proposed algorithm calculates the gamma coefficients using primary parameters extracted from the global distribution. And the fusion weights are adaptively determined with complementary parameters, considering the classification information of a binary segmentation. As the result, the proposed algorithm can obtain a good output about both the symmetric and the asymmetric distribution images even with severe exposure values.

• 드라이브 ㆍ 컨트롤
• /
• 제16권2호
• /
• pp.30-35
• /
• 2019

EPPR (Electro-hydraulic Proportional Pressure Reducing) valves are pressure control valves. In this study, an independent metering valve (IMV), which is a combination of a spool valve opened and closed with the help of an EPPR valve, was discussed. The overall performance of the valve (IMV) was obtained by the respective modeling and simulation of the system. The valve investigated in this study is to be used for independent metering of hydraulic excavator actuator e.g. boom, arm, bucket etc. To design the model, continuity equations and force balance equations were used. The set of differential equations were then simulated in Simulink using ODE45 option in the configuration toolbox. The valve has to be able to control the flow rate going in and out of the cylinder separately, which is why the particular configuration was needed and selected.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2011년도 춘계학술발표대회
• /
• pp.709-712
• /
• 2011

본 논문은 AMI(Advanced Metering Infrastructure) 네트워크의 성능 시뮬레이터를 구현하기 위해 필요한 설계 모듈들을 제안한다. AMI 네트워크는 스마트 그리드의 핵심시스템으로 네트워크를 구성하는 장치들이 스스로 통신하여 서로 간에 필요한 정보를 수집 분석하고 사용자가 원하는 정보를 제공하기 위한 환경이다. 이러한 AMI 네트워크를 실제로 전국에 구현 할 시 발생할 수 있는 시행착오를 최소화하기 위해 성능, 위험요소 등을 사전 시뮬레이션 해 볼 필요가 있다. 본 논문에서는 AMI 네트워크를 시뮬레이션하고 적정 성능을 분석하기 위한 성능 시뮬레이터의 모듈을 제안한다.

• 상하수도학회지
• /
• 제22권5호
• /
• pp.489-493
• /
• 2008

• 한국도로학회:학술대회논문집
• /
• 한국도로학회 2008년도 춘계학술대회 논문집
• /
• pp.103-111
• /
• 2008