• 전기학회논문지
• /
• 제57권8호
• /
• pp.1349-1355
• /
• 2008

The paper shows the analysis of operating conflict of OCGR trip events and metering errors in the photovoltaic generation, wind generation distributed generation customers with no defect of the distributed generation facilities, which are connected to 22.9kV distribution lines. To analyze problems with metering errors and OCGR fault event, a power quality analyzer and PSIM program were used to test the field and to simulate in Sun-Cheon photovoltaic generation and Seo-Cheon photovoltaic generation customers. With the trial distribution line, the result of analysis was verified to prove with the same situation of the actual field. This paper suggests short term and long term countermeasures of OCGR fault events, analysis of over and shortage of metering errors in distributed generation customers.

• 한국멀티미디어학회논문지
• /
• 제3권2호
• /
• pp.133-139
• /
• 2000

본 논문에서는 WWW 웹페이지에 대한 기존 매체와의 차별성 및 요구사항에 비추어 WWW환경을 위해 안전하고 효율적인 웹 페이지의 사용량 및 인기도 측정 방안을 제안한다. 암호 기술을 기반으로 하는 웹 측정 방안은 안전성, 효율성, 정확성, 익명성 들을 제공하므로 기존 광고 측정 방식에 비해 웹 서버의 클라이언트 방문 수 부풀리기, 클라이언트의 웹 측정 과정 방해, 서버 및 클라이언트의 공모 등을 막을 수 있는 장점이 있다.

• 대한교통학회:학술대회논문집
• /
• 대한교통학회 2007년도 제56회 학술발표회논문집
• /
• pp.352-361
• /
• 2007

• 드라이브 ㆍ 컨트롤
• /
• 제15권4호
• /
• pp.139-147
• /
• 2018

• Journal of Biosystems Engineering
• /
• 제34권3호
• /
• pp.140-146
• /
• 2009

The garlic, along with the red pepper, is one of the major seasoning vegetables in Korea. Garlic clove planting is one of the most laborious operations. Labor cost is the main source of high production cost of the garlic. Because of the geometrical uniqueness and irregularity of garlic cloves, mechanization of garlic clove planting is very difficult. To overcome price competition against the imported garlic, however, there has been a need of development of a clove metering device and a planting device for the garlic clove planter. Computer simulation, laboratory tests and field tests were conducted to develop a garlic clove planter. This research was conducted to drop garlic cloves into a soil holes through a drum bucket metering system and a rotary type planting system. Followings are the major achievements from this study. 1. The metering device consisted of a drum, a guide, a bucket and a bucket cover. Opening positions of the metering hopper were evaluated at different positions and trajectories of planting hoppers. The simulation showed that the optimum positions of hopper was -15${\sim}$0 mm in the x direction. 2. When the planter was tested under different soil textures and water contents, the best performances were obtained in a upland field with 29.1% water content and a paddy field with 18.3% water content where single clove metering and missing rate were 88.4% and 1.3%, and 90.7% and 2.0%, respectively.

• 한국가스학회지
• /
• 제24권3호
• /
• pp.1-10
• /
• 2020

이 논문은 가스 산업 현장에서 사용하기 위한 스마트 가스미터링 (AMI)의 아키텍처와 서비스의 개발에 관한 내용을 기술하고 있다. 일반적인 가스 AMI 시스템은 스마트 가스 계량기, IoT 네트워크, AMI 플랫폼, 보안 및 운영관리 시스템으로 구성되어 진다. 제안된 가스 AMI 플랫폼은 스마트 미터링 장치와 AMI 서비스 간의 양방향 통신을 지원하고, 여러 타사의 가스미터와 이종 IoT 네트워크와의 상호 운용을 위한 oneM2M 기반의 표준이 적용된다. 제안한 플랫폼을 적용한 AMI 시스템의 실증을 위하여 약 2,900대의 스마트 가스미터를 실제 환경에 설치하고, 1년 동안 가스AMI 시스템을 가동시켰다. 약 94%의 가스미터가 정상적으로 동작하고, 원격검침 서비스가 어떤 에러나 고장 없이 안정적으로 운용되었음을 확인하였다.

• 한국ITS학회 논문지
• /
• 제10권2호
• /
• pp.9-21
• /
• 2011

첨두시 고속도로의 혼잡이 심각할 경우 수요와 용량을 조절하는 운영방안이 필요하다. 고속도로의 연결로에서 본선으로 진입하는 교통류가 본선의 용량을 초과하지 않도록 진입제어 시스템을 이용하여 혼잡을 감소시키고, 안전성을 증진시킬 수 있다. 본 연구에서는 램프부에 위치한 차량들을 본선의 교통상황을 고려하여 진입시키는 진입제어 전략을 보다 효과적으로 운영하기 위한 방안으로 진입제어 실시영역에 대하여 연구하였다. 본선의 교통상황에 따라 진입제어를 실시하거나 미실시하는 교통영역이 존재할 것이라 판단하고, 제어 불필요 제어 필요 제어 최소화 등으로 교통량 수준에 따라 진입 제어 전략이 운영될 수 있는 교통상황 영역을 도출하였다. 이를 위해 고속도로 본선 및 램프부의 교통량에 따라 시나리오를 수립하고 널리 이용되고 있는 진입제어 알고리즘 중의 하나인 ALINEA를 미시적 교통류 시뮬레이터에서 구현하여 모의실험을 수행하였다. 밀도와 평균속도를 효과척도로 하여 본선교통량과 본선으로 투입되는 교통량에 따라 진입제어를 운영해야하는 적정 교통수요 영역을 도출하였다. 분석결과, 본선의 교통량이 많아질수록 밀도는 감소하는 경향을 보이며 감소폭도 크게 산출되었다. 또한, 평균속도는 진입제어를 운영하는 것이 15%의 개선효과를 보였으며, 본선교통량 이 3000~5000대/시이고 진입교통량이 700~900대/시일 때 통행속도의 증가폭이 크게 나타났다. 본 연구에서 도출된 교통수요 영역은 적정 진입제어 영역으로 볼 수 있으며 이에 따라 본선으로 진입하는 교통류를 제어할 경우 밀도와 평균속도 측면에서 유의미한 효과가 있을 것으로 판단된다.

• Journal of Biosystems Engineering
• /
• 제43권4호
• /
• pp.303-310
• /
• 2018

Purpose: This research was conducted to determine the design factors of a seed-metering device for the development of a seeder. The device allows the seeder to sow precisely one to three seeds of foxtail millet and sorghum. To obtain fundamental information regarding the design of the seed-metering device, examination of the physical properties of foxtail millet and sorghum was conducted. Methods: Based on the results of an adaptability test using an existing seeder with foxtail millet and sorghum, an experimental roller-type seed-metering device was made. The seeding factors considered during the experiment were the width, length, and depth, as well as the shape of the groove in the seed-metering roller. By adapting an analysis of variance, the experimental results of the seeding factors were analyzed. Results: The measured results of the respective lengths and widths of the seeds were 2.11 and 1.64 mm for foxtail millet, and 3.68 and 3.32 mm for sorghum, respectively. The weight of 1,000 seeds was 2.43 g for foxtail millet and 17.5 g for sorghum. The seeds were of an elliptical shape, considering the length and width. A sieve analysis showed that the size distribution of foxtail millet was quite regular whereas that of sorghum was irregular. Conclusions: The seeding results showed that the rates of incorrect planting were low when the groove of the roller-type metering device is an elliptical type. To sow one to three seeds, the groove of roller-type metering devices $2.0mm{\times}4.0mm{\times}1.5mm$ ($width{\times}length{\times}depth$) for foxtail millet, and $4.0mm{\times}8.0mm{\times}3.0mm$ and $4.5mm{\times}8.0mm{\times}3.0mm$ ($width{\times}length{\times}depth$) for Sorghum.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.437-438
• /
• 2013

• Journal of Biosystems Engineering
• /
• 제22권4호
• /
• pp.469-478
• /
• 1997

This study was conducted to develop an automatic nutrient-solution mixing system for small-scale sewers. The nutrient-solution mixing system consisted of a low-cost and precise metering device and data acquisition ＆ control system with a personal computer. and, the metering device was composed of three parts those were supply pumps, metering cylinders and venturi tube. The system controlled electric conductivity(EC) and pH of nutrient-solution based on the time-based feedback control method with the information about temperature, EC, and pH of the nutrient-solution. The performance of the nutrient-solution mixing system was evaluated through the control of EC and pH while compared with those of commercial system. Also an experimental cultivation of tomato was conducted to verify and to improve the developed system. Results of this study were as follows. 1. The correlation coefficient of meteing device between the flow rate and operating time was 0.9999, and the linear reuession equation computed was y=21.759x, where y is the discharge($g$) and x is the operating time(s). 2. Calculated errors for the developed metering device and two commercial pump were $\pm$0.3% $\pm$2.45% and $\pm$1.38 % FS error respectively. 3. An automatic nutrient-solution mixing system based on a low-cost and precise metering device was developed. 4. The full scale errors of the developed system in controlling EC and pH at 23$\pm$1$^{\circ}C$ were $\pm$0.05mS/cm and $\pm$0.2, respectively 5. When using the commercial system, the controlled values of EC and pH of the 500 $\ell$ of water were 1.29 mS/cm and 6.1 pH for the setting points of 1.4 mS/cm and 6.0 pH respectively at 23$pm1^{\circ}C$. 6. The developed nutrient-solution control system showed $\pm$0.05 ms/cm of deviation from the setting EC value over the experimental cultivation period. 7. The deviation from the average values of Ca and Mg mass content in the several nutrient-solution were 0.5% and 1.8% respectively.