• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.1028-1029
• /
• 2003

The copolymerization of ethylene and norbornene was carried out with ansa-metallocene and modified methylaluminoxane (MMAO) cocatalyst. The copolymerization behavior was changed with the structure of metallocene catalysts. In addition the catalyst activity was dependent on the structure of MMAO, i.e.. MMAO-4 which contains less i-butyl group compared to MMAO-3A exhibited higher catalyst activity than MMAO-3A. The glass transition temperature and the composition of the produced copolymer were not affected by MMAO type.

• Macromolecular Research
• /
• 제9권2호
• /
• pp.71-83
• /
• 2001

The metallocene compounds had been applied to the polymerizations of olefins and vinyl monomers with methylaluminoxane (MAO) cocatalyst, and they have usually one transition metal atom per molecule, i.e., mononuclear metallocene. Recently it has been found that the dinuclear metallocene compounds containing two transition metal atoms exhibit the peculiar polymerization behaviors for olefins and vinyl monomers. In this article, the dinuclear metallocenes are classified into four groups of dinuclear bent-metallocene, dinuclear ansa-metallocene, dinuclear constrained geometry catalyst and dinuclear half-metallocene, and then the synthesis of dinuclear metallocene of each group as well as the polymerization behaviors for ethylene, propylene, and styrene are described.

• 한국고분자학회지:고분자과학과기술
• /
• 제5권3호
• /
• pp.189-199
• /
• 1994

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.123-127
• /
• 2000

In order to investigate the influence of manufacturing process on the electrical properties, we used two kinds of low density polyethylene prepared using metallocene catalyst (mL), linear low density polyethylene prepared using Ziegler catalyst (LL) and low density polyethylene by high pressure process (LD). mL has the narrowest composition and molecular weight distributions. We measured the dc and impulse breakdown strengths and current densities at 3$0^{\circ}C$, 6$0^{\circ}C$ and 9$0^{\circ}C$. mL had a higher breakdown strength and a lower high-field current than LD and LL. These results were discussed from the point of manufacturing processes.

• Bulletin of the Korean Chemical Society
• /
• 제19권12호
• /
• pp.1310-1314
• /
• 1998

The oligo(methylsilene) (1) was treated with the group 4 metallocene Cp2MCl2/Red-Al (M = Ti, Zr, Hf) combination catalysts and with the group 6 metal carbonyl M(CO)6 (M = Cr, W) catalysts, producing the modified, cross-linked polymers. The average molecular weights and percent ceramic residue yields of modified polymers increase as the catalyst goes down from Ti to Hf and similarly as the catalyst goes down from Cr to W. An interrelationship between average molecular weights and percent ceramic residue yield is found within the respective group of catalysts, but is not observed as the catalyst goes down from Ti to W. The polymers modified with the group 4 metallocene combination catalysts have higher molecular weights and similar percent ceramic residue yields as compared to the polymers modified with the group 6 metal carbonyl catalysts. The catalytic activities of group 4 metallocene combinations appear to be higher -100 ℃, but to be lower at very high temperature than those of group 6 metal carbonyls.

• 한국응용과학기술학회지
• /
• 제34권4호
• /
• pp.857-865
• /
• 2017

본 연구는 폴리에틸렌 중합에 이용되는 Ziegler-Natta 촉매와는 다른 Indene및 Cyclopent adien을 기반으로 하는 다양한 메탈로센 촉매를 사용하여 폴리에틸렌 왁스를 중합하고 중합한 폴리에틸렌 왁스의 특성에 대해 분석하고 평가 하였다. 폴리에틸렌 왁스 중합은 각 다른 구조의 리간드를 포함하는 메탈로센 촉매에 대하여 중합온도, 연쇄이동제로 사용되는 수소와 에틸렌가스의 비율을 조정하여 다양한 조건하에서 중합을 시도 하였으며 그에 따른 분자량과 분자량 분포, 촉매 수율을 비교 분석하였다. 결과적으로 본 연구를 통하여 저분자량을 가지며 좁은 분자량 분포를 가지기에 적합한 메탈로센 촉매의 구조를 제안하였으며 이상적인 폴리에틸렌 왁스를 중합 할 수 있었다.

• 한국응용과학기술학회지
• /
• 제33권4호
• /
• pp.698-705
• /
• 2016

본 연구는 메탈로센 촉매를 이용한 폴리에틸렌 왁스의 중합과 그 특성에 관한 연구를 진행하였다. 폴리에틸렌 왁스 중합에 사용되는 다양한 중합 조건을 시도하였다. 낮은 분자량을 갖는 폴리에틸렌 중합에 널리 이용되는 Ziegler-Natta 촉매와는 다른 여러가지 구조의 리간드를 갖는 다양한 메탈로센 촉매가 중합 특성에 미치는 영향에 대한 연구와 촉매의 수소 반응성에 관한 연구를 진행하였다. 또한 연쇄이동제인 수소량에 따른 분자량의 변화와 에틸렌 가스의 비율에 따른 분배를 관찰하였다. 마지막으로 본 연구에서는 폴리에틸렌 왁스의 중합에 적합한 메탈로센 촉매 구조를 제안하였다.

• Elastomers and Composites
• /
• 제54권4호
• /
• pp.286-293
• /
• 2019

In this study, flexible poly(ethylene-ter-1-hexene-ter-divinylbenzene) was prepared using four types of metallocene catalysts (rac-Et(Ind)₂ZrCl₂, rac-SiMe₂(Ind)₂ZrCl₂, rac-SiMe₂(2-Me-Ind)₂ZrCl₂, (C₅Me₅)TiCl₂[O-2,6-ⁱPr₂(C₆H₃)]) and two types of borate catalysts (trityl tetrakisborate and dimethylanilinium tetrakisborate). The yield, catalytic activity, molecular weight, structure, composition, and thermal properties of the terpolymers prepared using the various catalysts and cocatalyst systems were evaluated. Epoxidation of the terpolymers was successfully performed and this transformation was studied by ¹H NMR and FTIR.

• Bulletin of the Korean Chemical Society
• /
• 제18권12호
• /
• pp.1264-1268
• /
• 1997

The poly(methylsilene) (1) was modified with the group 4 metallocene Cp2MCl2/Red-Al (M = Ti, Zr, Hf) combination catalyst and with the group 6 metal carbonyl M(CO)6 (M = Cr, Mo, W) catalyst, producing the highly cross-linked isoluble polymer and the lowly cross-linked soluble polymer, respectively. An interrelationship between molecular weight and percent ceramic residue yield with metal within the respective group was not found. The polymers modified with the group 4 metallocene combination catalysts have higher molecular weight and lower percent ceramic residue yield than the polymers modified with the group 6 metal carbonyl catalysts do. The catalytic activity of group 4 metallocene combinations appears to be higher at ∼100 ℃, but to be lower at very high temperature than those of group 6 metal carbonyls. The pyrolysis of the modified 1 yielded SiC ceramic.

• Bulletin of the Korean Chemical Society
• /
• 제27권5호
• /
• pp.759-761
• /
• 2006

The compound B(C6F5)3 and its variations have been widely employed as alkyl carbanion abstracting reagents to produce metallocene cations for olefin polymerization.1-3 Weakly coordinating anions containing boron can greatly improve the activity of metallocene catalysts used in industrial olefin polymerization4 and thus group IV and V metallocene complexes of the organohydroborate anions have been intensively investigated.5 Recently, many organohydroborate metallocene complexes have been reported by Shore and co-workers.6-8 A common structural feature of those complexes is the three-center two electron M-H-B bond, like that observed in transition metal tetrahydroborate complexes but the reactivity and fluxional behavior of organohydroborate complexes are unlike those of the tetrahydroborate analogues.6 Although many of those metallocenes have been synthesized, few complexes could be used in the olefin polymerization and then this laboratory has been involved in the chemistry of the cyclic organohydroborate anions, and their group IV metallocene derivatives for the catalyst.9 Described here is recent work that led to the preparation of a novel cyclic organohydroborate hafnocene complex (h5-C5H5)2Hf ？(μ-H)2BC8H14 ,Cl. The hafnocene complex contains the three-center two electron bond Hf-H-B10 in which the hydride abstraction for olefin polymerization may occur.