• 대한화학회지
• /
• 제67권4호
• /
• pp.222-225
• /
• 2023

Metallic salts of C10-18 aliphatic carboxylic acids were prepared and their scanning electron microscopic images were analyzed for the morphology dependency with the metal and the carboxylic acid. Regardless of metal ion, metal salts of dicarboxylic acids showed a high crystallinity with a fiber image (SuA-Na). The aromatic dicarboxylates also represented a morphology of a rectangular-rod or board shapes (IA-Li, IA-Ba). With Na ion, most aliphatic carboxylate (MA, PA, SA) showed a fiber-like crystallinity. However, other monovalent Li, K and multivalent Mg, especially Al ion resulted a glassy-amorphous in the metallic salts of acids (MA, PA, SA). With divalent Ba and Ca ions, the metal salt of aliphatic acids expressed a branched round cluster shape as in SA-Ca, SA-Ba. Both Li and Mg ions with a similar size showed a strong morphological similarity in the metallic salts of aliphatic acids MA, PA, SA. In the case of Na and Ca ions with a similar size (98, 106 pm), both ionic salts of stearic acid gave a branching effect for a fiber or round granular image. In the case of hydroxyl-aliphatic acids (HLA, HPA, HSA), the fiber images in HLA-Na and HSA-Na was appeared about 100 nm thicker than those of nonhydroxycarboxylates (LA-Na, SA-Na). The metallic salts of unsaturated C-18 carboxylic acids (OlA, LeA and LnA) showed an amorphous glassy image due to a kinked carbon chain.

• 대한화학회지
• /
• 제15권6호
• /
• pp.330-347
• /
• 1971

Catalytic effects of metallic salts on the combustion of diesel fuel oil have been studied. In the case of organometallic salt, the active species are the metallic oxides resulted from combustion of the salts. The oxides act only on the residual solid carbon produced from the fuel oil combustion. The catalytic activity can be explained with the semiconductor theory just as in the case of the gas phase reaction. The chemical rate constant of the combustion of carbon, the soot from diesel fuel oil, is found to be $k_c=1.1{\times}10^4\;exp$ (-16,600/T) below $800^{\circ}K$. By addition of metallic oxides, the rate constant increases remarkably. This work has substantiated the belief that the effect of the metallic salts on the fuel oil combustion can conveniently be studied by checking directly the effect of the corresponding metallic oxide on the soot carbon.

• 펄프종이기술
• /
• 제46권3호
• /
• pp.73-80
• /
• 2014

In this study, in order to investigate the influence of insolubilizer on the double coating structure, we carried out basic research related to the double coating formulation with four insolubilizers having various chemical types such as amino aldehyde, glyoxal and two metallic salts. It was found that although the four insolubilizers showed similar results on optical and surface properties of the coated papers, they gave different results in the printabilities of the coated papers since coating structure was significantly influenced by different reacting mechanism of the insolubilizers. Three of the insolubilizers (glyoxal, two metallic salts) showed better results than amino aldehyde type one when they were applied to top coating formulation. Metallic salts type insolubilizers showed good results in the print gloss when it was applied to top coating formulation. It was believed that amino aldehyde type insolubilizer applied top coating formulation showed good both of dry-pick and wet-pick strength.

• Carbon letters
• /
• 제7권1호
• /
• pp.34-41
• /
• 2006

The objective of this paper is to compare the variation of surface properties by hydrochloric acid pre-treatment and of metallic potassium and their salts loading effect for activated carbon after surfaces transformation by acid. From the results of nitrogen adsorption, each isotherm shows a distinct knee band, which is closely related to the characteristic of microporous carbons with capillary condensation in micropores. In order to present the causes of the differences in surface properties and $S_{BET}$ after the samples were treated with hydrochloric acid, pore structure and surface morphology are investigated by adsorption analysis. X-ray diffraction (XRD) patterns indicate that activated carbons show better performance for metallic potassium and potassium salts by pre-treatment with hydrochloric acid. Scanning electron microscopy (SEM) pictures of potassium/activated carbon particles provide information about the homogeneous distribution of metal or metal complex on the surface. For the chemical composition microanalysis for potassium treatment of the activated carbon pre-treated with hydrochloric acid, samples were analyzed by energy disperse X-ray (EDX). Finally, the type and quality of oxygen groups are determined from the method proposed by Boehm. A positive influence of the acidic groups on the carbon surface by acid treatment is also demonstrated by an increase in the contents of potassium salts with increasing of acidic groups calculated from Boehm titration.

• 청정기술
• /
• 제19권3호
• /
• pp.249-256
• /
• 2013

본 연구에서는 프린터 토너의 대전량 제어제로 사용되는 아연 착화합물 제조시 금속염과 다가알코올을 첨가함에 따라 변화되는 입자 형태, 평균 입도 및 마찰대전량에 대해 고찰하였다. 아연 착화합물을 제조하기 위해 염화아연과 3,5-di-tert-butyl salicylic acid를 사용하였다. 다가알코올을 첨가함에 따른 입자 형태 변화를 확인하기 위해 아연 착화합물 제조시 폴리에틸렌 글리콜(PEG-300), 글리세린 및 에틸렌글리콜을 첨가하였고, 금속염인 염화알루미늄을 첨가함으로써 변화되는 입자크기를 확인하였다. 또한 금속염과 다가알코올을 동시에 첨가하여 입도 변화를 확인한 결과, 각각 단독으로 첨가 했을 때보다 아연착화합물의 평균 입도가 더 많이 감소하는 것을 확인할 수 있었다. 특히, 알루미늄 착화합물의 함유량이 30 wt%이고 염화아연에 대한 PEG-300의 몰비를 3으로 하였을 때 아연 착화합물의 평균 입도가 $2.33{\mu}m$로 순수한 아연 착화합물의 평균 입도인 $5.28{\mu}m$의 44.1%로 가장 많이 감소한 것을 알 수 있었다.

• 공업화학
• /
• 제23권1호
• /
• pp.8-13
• /
• 2012

본 연구에서는 프린터 토너의 대전량 제어제로 사용되는 아연 착화합물 제조시 금속염과 다가알코올을 첨가함에 따라 변화되는 입자 형태와 평균 입도에 대해 고찰하였다. 아연 착화합물을 제조하기 위해 염화아연과 3,5-di-tert-butyl salicylic acid를 사용하였다. 다가알코올을 첨가함에 따른 입자형태 변화를 확인하기 위해 아연 착화합물 제조시 polyethylene glycol (PEG-300), glycerin 및 ethylene glycol을 첨가하였고, 금속염인 지르코늄 옥시클로라이드를 첨가함으로써 변화되는 입자크기를 확인하였다. 또한 금속염과 다가알코올을 동시에 첨가하여 입도변화를 확인한 결과, 각각 단독으로 첨가했을 때보다 아연 착화합물의 평균 입도가 더 많이 감소하는 것을 확인할 수 있었다. 특히, 지르코늄 착화합물의 함유량이 30 wt%이고 염화아연에 대한 PEG-300의 몰비를 3으로 하였을 때 아연 착화합물의 평균 입도가 1.84 ${\mu}m$로 순수한 아연 착화합물의 평균 입도(5.28 ${\mu}m$)의 34.9%로 가장 많이 감소한 것을 알 수 있었다.

• 한국재료학회지
• /
• 제25권12호
• /
• pp.694-702
• /
• 2015

Nd-Fe-B permanent magnets have been used in a wide variety of applications because of their high magnetic flux density. So, demand for neodymium has been increasing in worldwide. In this study, an electrowinning process was performed in $LiF-NdF_3-Nd_2O_3$ high temperature molten salts. However, a corrosion resistant material for use in the molten salt must be found for stable operation because of the harsh corrosion environment of the electrowinning process. Therefore, for this paper, boron nitride(BN), aluminum nitride(AlN), and silicon nitride($Si_3N_4$) were selected as protective and structural materials in the high temperature electrolyte. To investigate the characteristics of BN, AlN, and $Si_3N_4$, in molten salts, materials were immersed in the molten salts for 24, 72, 120, and 192 hours. Also, surface condition and stability were investigated by SEM and EDS and corrosion products were calculated by HSC chemistry. As a result, among BN, AlN, and $Si_3N_4$, AlN was found to show the best protective material properties.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2002년도 춘계 학술발표강연 및 논문개요집
• /
• pp.20-20
• /
• 2002

• 한국대기환경학회지
• /
• 제11권2호
• /
• pp.191-198
• /
• 1995

In order to evaluate the distribution and behaviour of atmospheric particulate metals in high-altitude area, we collected 22 aerosol samples using a high volume air sampler at Soback Mt. Meteorological Observation Station from Jan. to Nov. 1993 and analysed for metals (Al, Fe, Mg, Na, Ca, Mn, Co, Ni, Cu, Zn, Cd, and Pb) with ICP/AES and ICP/MS. Although sampling site is located in high-altitude and far from local sources of atmospheric pollutants, enrichments of metals are 2 times higher than those of western coastal reural area. This fact may imply that of metallic pollutants in the coastal rural site were came from further western side (e.g. China), atmospheric metals in this study area contain the signal of metropolitan cities located in the main wind direction (NNW). Sea salts are negligible in the aerosol particle population because reference elements of sea salts (Na, Mg) are all originated from soil particles. The contents of soil particles in aerosols are highest in spring and lowest in winter. Atmospheric enriched elements (Ni, Cu, Zn, Cd and Pb) are diluted with soil particles, especially during the yellow sand period. The results of factor analysis suggest possibility of interpreting their chemical significance in terms of sources (soil, pollutants) and gas-particle conversion processes (formation of ammonium sulfates, ammonium nitrates and/or their mixtures).

• Bulletin of the Korean Chemical Society
• /
• 제28권2호
• /
• pp.241-245
• /
• 2007

The electronic structures of the new organic conducting salts, the β'- and β''-phases of (BEDT-TTF)2[(IBr2)0.2(BrICl)0.1(ICl2)0.7], were examined by calculating their electronic band structures, Fermi surfaces and HOMO-HOMO interaction energies using the extended Huckel tight binding method. On the basis of these calculations, we probed why the β'-phase is semiconducting while the β ''-phase is metallic.