• Bulletin of the Korean Chemical Society
• /
• v.20 no.3
• /
• pp.281-284
• /
• 1999

Two La1.82Ca1.18Cu2O6+δ (2126) compounds exhibited different properties depending upon how they were synthesized. The compound prepared under high oxygen pressure showed superconductivity. But the compound prepared under low oxygen pressure did not exhibit superconductivity, and showed a metal-insulator transition. Our study on these compounds shows that a small amount of additional oxygen intercalated into the superconducting phase plays an important role for superconductivity. The Fermi surface of non-superconducting 2126 compound possesses nesting phenomena, which is the reason for the M-1 transition. On the other hand, the superconducting 2126 compound does not show Fermi surface nesting. This is because the additional oxygen removes some electrons from Cu d-orbitals, thereby bradking the Fermi surface nesting.

• Proceedings of the KIEE Conference
• /
• 2008.09a
• /
• pp.243-244
• /
• 2008

The Velocity Autocorrelation Function (VAF) of the sodium ions is calculated for a range of temperature from 250K to 1000K and converted into the linear ac-conductivity and ac-susceptibility response via Fourier transformation. A peak is found in the conductivity around $6{\times}10^{12}Hz$ that has some of the character of a Poley absorption. Here it is shown to be due to an harmonically coupled site vibrations of the sodium atoms, which extend only over a limited range. At frequencies below the peak the conductivity tends towards a constant i.e. dc value corresponding to a constant flow of ions through the simulation cell. At high temperatures the conductivity due to this ion transport process behaves like a metal with an insulator to metal transition occurring around a specific temperature.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.60-60
• /
• 2011

Giant magnetoresistance (GMR), tunneling magnetoresistance (TMR), and magnetic random-access memory (MRAM) are currently active research areas in spintronics. The high magnetoresistance and the high spin polarization (P) of electrons in the ferromagnetic electrodes of tunnel junction or intermediate layers are required. Magnetite, Fe3O4, is predicted to possess as half-metallic nature, P ~ 100% spin polarization, and has a high Curie temperature (TC~850 K). Experiments demonstrated that the P~($80{\pm}5$)%, ~($60{\pm}5$)%, and ~40-55% for epitaxial (111), (110) and (001)-oriented Fe3O4 thin films, respectively. Epitaxial Fe3O4 films may enable us to investigate the effects of half metals on the spin transport without grain-boundary scattering.In addition, it has been reported that the Verwey transition (TV, a first order metal-insulator transition) of 120 K in bulk Fe3O4 is strongly affected by many parameters such as stoichiometry and stress, etc. Here we report that the growth modes, magnetism and transport properties of Fe3O4 thin films were strongly dependent on the oxygen pressure during film growth. The average roughness decreases from 1.021 to 0.263 nm for the oxygen pressure increase from $2.3{\times}10-7$ to $8.2{\times}10^{-6}$ Torr, respectively. The 120 K Verwey transition in Fe3O4 was disappeared for the sample grown under high oxygen pressure.

• Journal of the Korean Vacuum Society
• /
• v.12 no.S1
• /
• pp.67-69
• /
• 2003

The magnetic properties of single- and poly-crystalline $La_{0.7}Sr_{0.3}MnO_3/Pr_{0.65}Ca_{0.35}MnO_3$ multilayered (ML) films, and composite (CP) $(La_{0.7}Sr_{0.3})_{0.5}(Pr_{0.65}Ca_{0.35}_{0.5}MnO_3$ films, prepared by laser ablation, have been investigated in a wide temperature range. It was shown that the transformation from an incoherent to a coherent interface in the ML films leads to an enhancement of the ferromagnetic coupling between layers and to a single-phase magnetic transition. The amorphous CP films demonstrate a paramagnetic behavior of the magnetization with a sharp peak at $T_{G}\approx$45 K, which was interpreted as the formation of Griffiths phase. A short-term annealing at $750^{\circ}C$ induced the complete crystallization of film, and a recovery of the ferromagnetic and the metal-insulator transitions.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.125.2-125.2
• /
• 2015

The evolution of oxidation states of vanadium is monitored with ambient pressure X-ray photoemission spectroscopy. As the pressure of oxygen gas and surface temperature change, the formations of various oxidation states of vanadium are observed on the surface. Under 100mTorr of the oxygen gas pressure and 523K of sample temperature, VO2 and V2O5 are formed on the surface. The temperature-dependent resistance measurement on grown sample shows a clear metal-insulator transition near 350K. In addition, the measurement of Raman spectroscopy displays the structural change from monoclinic to rutile structures across the phase transition temperature.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.172-172
• /
• 1999

Perovskite Manganese Oxide has been intensively investigated since the discovery of the colossal magnetoresistive(CMR) effect. In this paper, we studied the effect of temperature dependence and various doping dependence of rare earth site ions of La0.7-xPrxCa0.3MnO3 series using Ultraviolet Photoelectron spectroscopy(UPS). They show unusual temperature dependent features and the doped rare earth ions seem to affect the electron-phonon coupling strongly. We found clear evidence of metal-insulator transition from the spectral density at the Fermi level. but the transition temperature is lower than that deduced from transport measurements. Also we found that the spectral features change as time goes on implying that the surface of these materials is somewhat unstable in the vacuum. We can conclude from these results that the surface oxygen atoms correlated to the hopping electrons can escape from the material into the vacuum and that the surface state of these material is different from the bulk state.

• Journal of the Korean Ceramic Society
• /
• v.52 no.5
• /
• pp.361-365
• /
• 2015

Vanadium dioxide ($VO_2$) of monoclinic phase exhibits Metal Insulator Phase Transition (MIPT) phenomenon involving a sharp change in electrical and optical properties at $68^{\circ}C$. Solution-based process is applied to form uniform $VO_2$ coating layer on ceramic tiles. This can selectively block the near-infrared light to possibly reduce the energy loss and prevent dew condensation caused by the temperature difference. Heat treatment conditions including temperature and dwell time were examined to obtain a monoclinic $VO_2$ single phase. Both rutile and monoclinic $VO_2$ phases were observed from in the tiles post-annealed below $700^{\circ}C$. Desired monoclinic $VO_2$ single phase was grown in the tiles heat treated at $750^{\circ}C$. Nano facets of irregular size were observed in the monoclinic $VO_2$ phase involving the phase-transition. Grain growth of monoclinic $VO_2$ phase was observed as a function of dwell time at $750^{\circ}C$.

• Electronics and Telecommunications Trends
• /
• v.26 no.3
• /
• pp.88-94
• /
• 2011

MIT 물질은 절연체에서 금속으로 전이할 때 특정한 온도와 전압에서 전기 저항이 급격하게 감소하는 물질을 말한다. 그 감소폭은 약 $10^4{\sim}10^5$배 정도로 이전에 볼 수 없었던 아주 큰 값이다. 또한 이러한 급격한 감소로 인하여 NDR 같은 현상이 발생하며, 외부에서 주어지는 광학적 에너지에 의하여 전이가 일어나기도 한다. 이러한 여러 현상들을 이용하여 여러 가지 전자소자로의 응용이 시도되고 있다. 이러한 시도는 MIT 물질의 단독으로 뿐만 아니라 기존의 전자소자와 병행하여 더욱 시너지를 발휘할 것으로 예측된다. 본 보고서에서는 MIT 현상의 간략한 설명과 현재 기술의 발전 방향, 간단한 응용소자에 관하여 개괄적으로 기술하고자 한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.374-377
• /
• 2003

Sol-gel processing of BaTiO$_3$ ceramics doped with La(0.01-1.00 at.%) were prepared from metal barium, titanium n-butoxide and lanthanum isopropoxide. Characterization of the sol-gel-derived powder using XRD, SEM is also reported. The obtained results suggested that insulator to semiconductor transition for highly donor-doped barium titanate was closely related to the incorporation of donor into the grains and to the resultant grain size, which were significantly affected by the sinterability of BaTiO$_3$ powders and sintering conditions used.

• Transactions on Electrical and Electronic Materials
• /
• v.4 no.4
• /
• pp.18-21
• /
• 2003

Sol-gel processing of $BaTiO_3$ ceramics doped with La(0.01-1.00 at. $\%$) were prepared from metal barium, titanium n-butoxide and lanthanum iso-propoxide. Characterization of the sol-gel-derived powder using XRD, SEM is also reported. The obtained results showed that insulator to semiconductor transition for highly donor-doped barium titanate was closely related to the incorporation of donor into the grains and to the resultant grain size, which were significantly affected by the sinterability of $BaTiO_3$ powders and sintering conditions used.