• 한국정밀공학회지
• /
• 제25권1호
• /
• pp.115-121
• /
• 2008

In this paper, a three-dimensional computational fluid dynamic model of a proton exchange membrane fuel cell(PEMFC) with serpentine flow channel is presented. A steady state, single phase and isothermal numerical model has been established to investigate the influence of the GDL (Gas Diffusion Layer) parameters. The GDL is made of a porous material such as carbon cloth, carbon paper or metal wire mesh. For the simplicity, the GDL is modeled as a block of material having numerous pathways through which gaseous reactants and liquid water can pass. The porosity, permeability and thickness of the GDL, which are employed in the model parameters significantly affect the PEMFC performance at the high current region.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 1부
• /
• pp.39-40
• /
• 2011

The purpose of this study is to select a conductive resistor as high energy efficiency through analysis of the heating properties by induction heating. The result of this study, the heating properties is capable of weaken cementitious joint in 10~30 seconds when using the conductive resistor with wire mesh or punching metal. Although the steel is higher temperature than SUS304, SUS304's heating properties are more uniform.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 1부
• /
• pp.3-4
• /
• 2011

The purpose of this study is to suggest basic data for development optimal disassembly manufacturing system during analysis pore structure and heating properties of cementitious joint using conductive resister by induction heating. From the results, we knew cementitious joint is weak easily by heating of conductive resister, such as wire mesh, punching metal, and steel fiber, from induction heating.

• Journal of Welding and Joining
• /
• 제17권2호
• /
• pp.84-90
• /
• 1999

The shape of weld nuggest in arc spot welding of 304 stainless steel was found by searching thermal history of a weld joint through a three-dimensional finite element model. The problem consists of one in which the finite element mesh is growing continuously in time in order to accomodate metal transfer in arc spot welding using element rebirth technique. The analysis was performed on the basis of experimental results. The finite element program MARC, along with a few user subroutines, was employed to obtain the numerical results. Temperature-dependent thermal properties, stir effect in weld pool, effect of phase transformation, and the convective and radiative boundary conditions are included in the model. Numerically predicted shape of weld nuggest is compared with the experimentally observed shape.

• Journal of Advanced Marine Engineering and Technology
• /
• 제7권1호
• /
• pp.64-78
• /
• 1983

In nucleate boiling, bubbles are created by the expansion of entrapped gas or vapor at small cavities in the surface of heat transfer. Namely, surface roughness is the important factor of heat transfer. This paper deals with the characteristics of boiling curve according to surface roughness. Freon-113 is used as the experimental fluid. The results are as follows; 1. In the case of the same as "q=C$\Delta$T$^{n}$ ", the lower numberical index "n", the larger heat transfer coefficient and the lower wall superheat "$\Delta$T" is obtained for the rougher surface. 2. In the working of every kind of heat transfer sruface with boiling, improvement of capabilities of heat transfer can be devised by adding suitable roughness on the heat transfer surface. 3. When the metal nets of moderate mesh number are established, the capabilities of heat transfer can be improved in evaporation of liquid in vessels. But in the case that the sucession of bubbles in checked by using the nets which are too tight, the generation of bubbles union decreases critical heat flux. decreases critical heat flux.

• Design & Manufacturing
• /
• 제16권1호
• /
• pp.62-69
• /
• 2022

In the present study, the injection molding optimization of a large thick LH type elastic frames for the reduction of warpage was performed. Two kinds of fine and coarse finite element models were prepared to investigate the efficiency of analysis time and quality on simulation results. In order to derive injection molding conditions that can minimize distortion of parts, it was investigated that the effects of mold temperature, resin temperature, injection time, hold pressure switching time, holding pressure and the hold time on deformation characteristics using the design of experiments. The main influential factors on the warpage were found from the optimization simulation and the geometry data of the warpage result was converted into an initial model for injection simulation. It was shown that a coarse model with good mesh quality could be adapted for mold design since the total analysis time using the proposed model was reduced to 1/10. The suggested inversed warpage model produced the best minimized result of warpage.

• 한국정밀공학회지
• /
• 제13권10호
• /
• pp.78-87
• /
• 1996

In this paper, a remeshing criterion has been suggested in order to order to automate the remeshing decision during finite element analysis of metal forming. In order to use for the remeshing decision, two of remeshing criteria have been investigated. One is the use of error estimates based on errors in stresses and strain rate of the finite element solution and the other is the use of geometric characterisreics of distorted elements. As a result, the strain rate error estimate in power norm based on the former is found to give more valuable information about remeshing decision than the ones based on the latter. Examples are given to demon- strate the usefulness of the suggested eroor estimate as a remeshing criterion.

• 대한화학회지
• /
• 제29권2호
• /
• pp.178-182
• /
• 1985

비철특수합금중 아연(II) 구리(II)와 마그네슘(II)을 양이온 교환수지(Dowex 50w${\times}$8, 80-100 mesh)와 음이온 교환수지(IRA-400)을 이용하여 이온교환크로마토그라프로서 분리하는 방법을 연구 하였다. 이온교환수지는 25 ${\times}$ 2cm ID 칼럼에 넣고 흐르는 속도는 0.30 ml/min으로 조절하였다. 아연(II), 구리(II), 마그네슘(II)와 같은 비철금속 이온들을 분리하기 위한 좋은 용리액의 조건은 다음과 같다. 0.5M $NaNO_3$ (pH 3.1), 0.2~0.5M HCl + 50~90% Acetone과 1M HAc + 0.1M NaAcf(pH 3.7)였으며 0.1M NaAc + 1M NaAc(pH 3.7), 0.5M HCl + 50% Acetone이 가장 좋은 용리액으로 판명되었다. 분리된 용출액은 원자흡광 광도계로 측정하였으며 특히 아연 (II)은 음이온 교환수지에서 0.12N HCl과 1.5N $NH_4OH$ 수용액으로 분리하고 E.D.T.A로 적정하였다.

• 한국수소및신에너지학회논문집
• /
• 제12권4호
• /
• pp.277-285
• /
• 2001

본 논문은 연료전지 자동차용 10kWe급 정제일체형 메탄올개질기에 대한 연구결과이다. 이 개질기에서는 메탄올이 수증기와 반응하켜 수소를 포함한 혼합가스로 개질되고, 그 혼합가스는 다시 Palladium 합금막을 통하여 순수한 수소로 분리된다. 정제되고 남은 폐 가스중 가연성분들은 wire-mesh 형태의 연소촉매상에서 연소되어 개질반응에 필요한 열을 직접 공급함으로써 높은 메탄올 전환율, 고품질의 수소생산, 그리고 높은 시스템 열효율을 가능하게 한다. 동시에 이러한 개질, 분리 및 연소반응이 하나의 반응기에서 일어나 전체 시스템이 소형화될 수 있으며 운전이 용이한 장점도 있다. 본 연구팀에서 개발한 10kWe급 시스템은 운전연구를 통하여 수소생산량은 $8.2Nm^3/hr$ (10kWe급), 수소순도 99.999% 이상, CO 농도 5 ppm 미만, 총합열효율 81%, 초기기동 소요시간 20분, 부하변동웅답 1 분 이내를 달성했으며, 장처의 크기와 무게는 각각 16 L, 25 kg 이다.

• Structural Engineering and Mechanics
• /
• 제60권4호
• /
• pp.567-594
• /
• 2016

The main objective of the current research is estimating the flexural behavior of ferrocement Ribbed Plates reinforced with composite material. Experimental investigation was carried out on fifteen plates; their dimensions were kept constant at 1200 mm in length, 600 mm width and 100 mm thick but with different volume fraction of steel reinforcement and number of ribs. Test specimens were tested until failure under three line loadings with simply supported conditions over a span of 1100 mm. Cracking patterns, tensile and compressive strains, deformation characteristics, ductility ratio, and energy absorption properties were observed and measured at all stages of loadings. Experimental results were compared to analytical models using ANSYS 10 program. Parametric study is presented to look at the variables that can mainly affect the mechanical behaviors of the model such as the change of plate length. The results showed that the ultimate strength, ductility ratio and energy absorption properties of the proposed ribbed plates are affected by the volume fraction and the type of reinforcement, and also proved the effectiveness of expanded metal mesh and woven steel mesh in reinforcing the ribbed ferrocement plates. In addition, the developed ribbed ferrocement plates have high strength, ductility ratio and energy absorption properties and are lighter in weight compared to the conventional RC ribbed plates, which could be useful for developed and developing countries alike. The Finite Element (FE) simulations gave good results comparing with the experimental results.