• 한국미생물·생명공학회지
• /
• 제17권5호
• /
• pp.510-518
• /
• 1989

농산 폐자원 중에서도 감귤 가공공정에 따라 부생되는 감귤과피를 발효 기질로서의 이용을 목적으로 분리균 Asp. niger를 사용하여 구연산 발효에 미치는 배양조건 및 영향인자를 조사하였다. 그 결과 고 체 배양에서의 최적조건 즉 감귤과피와 물을 동량 혼합하고 여기에 NH$_4$NO$_3$0.2%, MgSO$_4$7$H_2O$ 0.1%, Methanol 2.5%를 첨가하여 PH4.5로 조절한 다음포자 현탁액(1x$10^8$ spore/$m\ell$) 2%를 접종하여 균체증식 초기에 35$^{\circ}C$, 20시간 배양하고 4시간 저온 처리한 다음 구연산 생성기에서 3$0^{\circ}C$로 48시간 배양했을 때 당에 대해 80.4%의 높은 수율의 구연산을 얻었다.

• 한국수산과학회지
• /
• 제25권5호
• /
• pp.325-330
• /
• 1992

어유의 이용성 증대와 천연항산화제의 개발을 위한 연구의 일환으로 정제정어리유에 대한 천연향신료의 항산화작용에 대하여 조사한 결과는 다음과 같다. 1. 정제정어리유에 대한 천연향신료의 항산화효과는 향초계 향신료가 향신계 및 종자계 향신료에 비해서 전반적으로 강하였으며 그중에서도 특히, rosemary와 sage에서 강하였다. 2. Rosemary와 sage의 석유에테르 가용성 회분은 그 항산화력이 BHT보다 강하였으며, 또한 금속이온의 봉쇄작용도 강하게 나타났다. 3. Rosemary와 sage 추출물은 저장에 따른 정제정어리유의 중량증가의 억제효과도 상당히 큰 것으로 나타났다.

• 대한치과기공학회지
• /
• 제34권2호
• /
• pp.75-81
• /
• 2012

Purpose: All ceramic crown, made from zirconia instead of metal for core material, is recognized the best esthetical prosthesis. Recently, high-priced zirconia blocks and expensive CAD/CAM machines come into use for making zirconia core. In this study, slip casting process is adapted to evaluate the possibility of the recycling the remained parts of zirconia block after machining. Methods: Remained zirconia blocks were reduced to powders with zirconia mortar, and screened with 180 mesh sieve. Passed powders were ball milled under various conditions to obtain the optimum zirconia slip for casting. Solid casting method was used for casting the specimens with plaster mold. Formed specimens were dried and biscuit fired at $1,000^{\circ}C$ for 1 hour. Biscuit fired specimens were finished with exact shape of square pillar. Finished specimens were fired from $1,200^{\circ}C$ to $1,550^{\circ}C$ at $50^{\circ}C$ intervals for 1 hour. Linear shrinkage, apparent porosity, water absorption, bulk density, and flexural strength were tested. Microstructures were observed by SEM. Results: Above examinations indicated that the optimum firing temperture was $1,500^{\circ}C$, and when fired at this temperature for 1 hour, apparent porosity was 0% and flexural strength was 680MPa. SEM photomicrographs showed uniform 200~300nm grain size, which is equal with microcture of sintered commercial zirconia block. when compare 24% linear shrinkage of cast specimen with 20% linear shrinkage of CAD/CAM machined block, it was estimated that the size controlling of cast core was not so difficult. Conclusion: According to the all of this experimental results, the cast zirconia core produced from the remained parts of zirconia block was possible to use for all ceramic denture.

• Journal of Mechanical Science and Technology
• /
• 제19권4호
• /
• pp.1044-1051
• /
• 2005

The isothermal characteristics of a rectangular parallelepiped sodium heat pipe were inves­tigated for high-temperature applications. The heat pipes was made of stainless steel of which the dimension was $140\;m\;(L)\;{\times}\;95m\;(W)\;{\times}\;46 m\;(H)$ and the thickness of the container was 5 mm. Both inner surfaces of evaporator and condenser were covered with screen meshes to help spread the liquid state working fluid. To provide additional path for the working fluid, a lattice structure covered with screen mesh wick was inserted in the heat pipe. The bottom surface of the heat pipe was heated by an electric heater and the top surface was cooled by circulating coolant. The concern in this study was to enhance the temperature uniformity at the bottom surface of the heat pipe while an uneven heat source up to 900 W was in contact. The temperature distribution over the bottom surface was monitored at more than twenty six locations. It was found that the operating performance of the sodium heat pipe was critically affected by the inner wall temperature of the condenser region where the working fluid may be changed to a solid phase unless the temperature was higher than its melting point. The maximum temperature difference across the bottom surface was observed to be $114^{\circ}C$ for 850 W thermal load and $100^{\circ}C$ coolant inlet temperature. The effects of fill charge ratio, coolant inlet temperature and operating temperature on thermal performance of heat pipe were analyzed and discussed.

• 복식문화연구
• /
• 제26권4호
• /
• pp.632-648
• /
• 2018

This study aims to contribute to the development of sports wearables. It was conducted by a convergence team of professionals in the fashion industry, kinesiology and sports studies, and computer science and engineering. The purpose of the current study was to design and develop a fabric-type fitness band for a sensor to measure acceleration during jump rope exercises. Computer science and engineering professionals developed the Arduino board and sensor, kinesiology and sports studies provided the necessary exercise protocol, and the fashion industry professionals developed the band. First, a fitness band preference survey was completed by men and women between the ages of 20 and 50. Typical uses of the band included tracking exercise amount as measured by the number of steps taken and calories burned. Strap watch closure, a single color and achromatic color, and soft and smooth touch materials were preferred as band design. Second, two fabric-type fitness bands were designed and developed. Design 1 had a 3-dimensional pocket for the sensor, bright blue color, and stretch binding around the edges and for a loop. Design 2 had a flat pocket for the sensor, achromatic color, mesh binding around the edges and two metal loops. Both designs had Velcro as a closure. Third, wear testing of both bands with the sensor were conducted of 15 women in their 20s. They wore the bands during jump rope exercises. Both bands generally satisfied the participants. The Design 2 band was slightly more satisfying than the Design 1 band.

• 센서학회지
• /
• 제20권3호
• /
• pp.207-212
• /
• 2011

In this study, pyramid structured black silicon process was developed in order to overcome disadvantages of using wet etching to texture the surface of single crystalline silicon and using grass/needle-like black silicon structure. In order to form the pyramidal black silicon structure on the silicon surface, the RIE system was modified to equip with metal-mesh on the top of head shower. The process conditions were : $SF_6/O_2$ gas flow 15/15 sccm, RF power of 200 W, pressure at 50 mTorr ~ 200 mTorr, and temperature at $5^{\circ}C$. The pressure did not affect the pyramid structure significantly. Increasing processing time increased the size of the pyramid, however, the size remained constant at 1 ${\mu}M$ ~ 2 ${\mu}M$ between 15 minutes ~ 20 minutes of processing. Pyramid structure of 1 ${\mu}M$ in size showed to have the lowest reflectivity of 7 % ~ 10 %. Also, the pyramid structure black silicon is more appropriate than the grass/needle-like black silicon when creating solar cells.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2010년도 춘계학술발표대회 초록집
• /
• pp.57-57
• /
• 2010

For thin panel welded structure, the various welding distortions were found due to the low resistance against welding deformation. Especially, buckling distortion induced in the thin panel welded structure produce severe problems related to cost in production stage and safety in service life. So, many researches including mechanical and thermal tensioning method for preventing the occurrence of buckling distortion in the production stage have been performed. The purpose of this study is to identify the behavior of longitudinal residual stress at the SA butt weldment with thin plate of 6mm thickness under tension load by 3 dimensional FEA. For it, mesh design for 3D FEA was constructed with 20 nodes brick element for butt weldment and 8 nodes shell element for base metal. According to FEA results, the longitudinal compressive strain inducing tensile residual stress at the butt weldment decreased. It was because the compressive thermal strain in way of weldment was reduced by tension load. The control effect of residual stress increased with an increase in tension load. So, if the amount of tension load applied to the weldment exceeds 1.5 times of longitudinal shrinkage force, the amount of longitudinal residual stress decreased below the critical value inducing the buckling distortion at the SA butt weldment. Its validity was verified by experiment.

• 자원리싸이클링
• /
• 제24권4호
• /
• pp.12-21
• /
• 2015

일반적으로 구리제련 슬래그내 구리함량은 0.5-3.7% 혹은 그 이상의 높은 비율로 포함되어 있며, 슬래그내 구리회수에 대한 대표적인 방법으로는 부유선별, 침출 그리고 배소가 있다. 본 연구에서는 부유선별법에 의한 구리 회수방법을 검토하였으며, 잔세이트포수제를 이용한 황화부선을 수행하였다. 산성과 알칼리 조건에서 부유선별 특성을 관찰하였으며, pH 4 에서 구리회수율 50%, pH 11 에서 구리회수율 67%로 나타났으며, 특히 pH 11에서는 $100{\mu}m$ 이상의 입자가 정광으로 부유되어 회수율이 상대적으로 높게 나타나는 경향을 보였다. 슬래그 입도를 200 mesh 이하로 분쇄하여 단체분리도를 향상시켜 pH조건별 부유선별 실험을 수행한 결과, 회수율이 78 - 83%까지 향상되는 것을 확인할 수 있었다.

• 자원리싸이클링
• /
• 제4권3호
• /
• pp.2-9
• /
• 1995

탈황 폐촉매 중에 함유되어 있는 Ni, V 및 Mo을 배소, 암모니아 침출 및 용매추출법을 이용하여 분리.회수하는 프로세스에 대하여 연구하였다. 폐촉매를 $400^{\circ}C$로 3시간 동안 배소한 후, 20mesh 이하로 분쇄하여, 고액비 50g/d㎥의 조건에서 100g/d㎥-(NH$_4$)$_2$CO$_3$를 침출제로 하여 $80^{\circ}C$에서 침출한 결과 Ni, V 및 Mo의 침출율은 각각 81.2%, 65%, 87.5%이었다. 이 침출액을 방냉하면 침출액 중의 74%의 V이 바나듐산 나트륨염의 형태로 침전되어 순도 95.7%의 V을 회수할 수 있었다. 1차 침출 후의 잔사에$ Na_2$$CO_3$를 가하여 $1000^{\circ}C$에서 재차 배소한 후, 온수에 침출하여 잔존된 Mo과 V을 95%이상 침출되었다. 1차 침출액 중의 Ni, V 및 Mo을 용매추출법으로 분리.정제하였다. 용액 중의 Ni는 MSP-8, V은 TOMAC을 추출제로 하여 추출.분리하고 Mo은 raffinate로 분리하였다. Batch 추출에 의하여 Ni은 95%, V은 98%가 유기상에 추출되었으며, 역추출액에 환원제를 첨가하여 순도 99%이상의 V을 회수하였다.

• 자원리싸이클링
• /
• 제4권1호
• /
• pp.52-59
• /
• 1995

Co의 리싸이클링을 원활히 하기 위하여 괴상 superalloy 스크랩을 용융Zn으로 분해할 때의 최적처리조건을 조사하였다. 조사한 superalloy는 Co-기 Mar-M-509와 X-45 그리고 Ni-기 Rene 80이었다. Zn/스크랩 비율이 1.5~6.5인 장입물을 질소 분위기에서 $750~900^{\circ}C$에서 1~7.5시간 동안 가열하였다. 용융된 Zn은 스크랩을 용해하였고, Zn은 $850~900^{\circ}C$에서 4~6시간 동안 진공증류하여 제거되었다. Mar-M-509와 Rene 80의 최적 처리조건은 용해온도 약 $^850{\circ}C$, Zn/스크랩 비율 약 5, 그리고 용해시간 약 5.5시간이었다. Zn처리 superalloy 생성물은 쉽게 부스러졌으며, 산 용액에 의해 빠르게 침출되었다. Mar-M-509 또는 Rene 80의 경우, 미처리 스크랩(9mm 조각)을 화학양론양 5배의 6N HCl으로 $90^{\circ}C$에서 3시간 동안 처리하면 침출도는 약 1.5~7.2%에 지나지 않았으나, Zn처리 생성물(-20 메쉬의 것)의 침출도는 약 89.0~93.0%나 되었다.