• Journal of Microbiology and Biotechnology
• /
• v.33 no.2
• /
• pp.195-202
• /
• 2023

Protease is a widely used enzyme particularly in the detergent industry. In this research, we aimed to isolate alkaline protease-producing bacteria for characterization as a laundry detergent additive. The screening of alkaline protease production was investigated on basal medium agar plus 1% skim milk at pH 11, with incubation at 30℃. The highest alkaline protease-producing bacterium was 6BS15-4 strain, identified as Bacillus gibsonii by 16S rRNA gene sequencing. While the optimum pH was 12.0, the strain was stable at pH range 7.0-12.0 when incubated at 45℃ for 60 min. The alkaline protease produced by B. gibsonii 6BS15-4 using dairy effluent was characterized. The optimum temperature was 60℃ and the enzyme was stable at 55℃ when incubated at pH 11.0 for 60 min. Metal ions K⁺, Mg²⁺, Cu²⁺, Na⁺, and Zn²⁺ exhibited a slightly stimulatory effect on enzyme activity. The enzyme retained over 80% of its activity in the presence of Ca²⁺, Ba²⁺, and Mn²⁺. Thiol reagent and ethylenediaminetetraacetic acid did not inhibit the enzyme activity, whereas phenylmethylsulfonyl fluoride significantly inhibited the protease activity. The alkaline protease from B. gibsonii 6BS15-4 demonstrated efficiency in blood stain removal and could therefore be used as a detergent additive, with potential for various other industrial applications.

• The korean journal of orthodontics
• /
• v.31 no.6 s.89
• /
• pp.567-578
• /
• 2001

To investigate the difference of Texture exhibited on interproximal enamel surface with each different stripping method and the susceptibility of proximal enamel to demineralization after stripping and the application of a topical fluoride go] and sealant, one hundred human premolars, which were Previously extracted for orthodontic reasons were evaluated by means of Scanning electron microscopy and laser fluorescence. The results were as follows : 1. No matter what the initial stripping instrument was the furrows that resulted from all the stripping methods were not completely removed by careful polishing. 2. Among the enamel surfaces that were treated with three different initial abrasive instruments, followed by the same polishing method (Sof-$Lex^{(r)}$ disks), the enamel surfaces that were treated with 700 crosscut carbide bur showed the smoothest surfaces. 3. The stripped teeth, no matter what the initial stripping instrument was, were less resistant to initial demineralization than untreated teeth. But no difference in caries susceptibility according to differently stripped methods was found (p<(0.001). 4. Teeth treated with APF-gel or sealant were mote resistant to demineralization than those treated without other treatment after stripping (p<0.001). 5. Comparing groups treated with APF-gel to groups treated with sealant, the former was more resistant to demineralization than the tatter (p<0.05). In conclusion, enamel surfaces that were stripped jnterproximally were less resistant to demineralization even though various attempts were made to produce smooth, self-cleaning enamel surfaces. Therefore, additional treatment-sealant or calcifying/ fluoridating solution To the stripped enamel surfaces is recommended.

• Journal of Microbiology and Biotechnology
• /
• v.19 no.9
• /
• pp.987-996
• /
• 2009

Aspergillus niger GH1 previously isolated and identified by our group as a wild tannase producer was grown under solid-state (SSC) and submerged culture (SmC) conditions to select the enzyme production system. For tannase purification, extracellular tannase was produced under SSC using polyurethane foam as the inert support. Tannase was purified to apparent homogeneity by ultrafiltration, anion-exchange chromatography, and gel filtration that led to a purified enzyme with a specific activity of 238.14 IU/mg protein with a final yield of 0.3% and a purification fold of 46. Three bands were found on the SDS-PAG with molecular masses of 50, 75, and 100 kDa. PI of 3.5 and 7.1% N-glycosylation were noted. Temperature and pH optima were 600e and 6.0 [methyl 3,4,5-trihydroxybenzoate (MTB) as substrate], respectively. Tannase was found with a $K_M$ value of $0.41{\times}10^{-4}M$ and the value of $V_{max}$ was $11.03{\mu}$moL/min at $60^{\circ}C$ for MTB. Effects of several metal salts, solvents, surfactants, and typical enzyme inhibitors on tannase activity were evaluated to establish the novelty of the enzyme. Finally, the tannase from A. niger GH1 was significantly inhibited by PMSF (phenylmethylsulfonyl fluoride), and therefore, it is possible to consider the presence of a serine or cysteine residue in the catalytic site.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1993.05a
• /
• pp.79-84
• /
• 1993

This paper describes the development of lithium rechargeable cell. $LiCoO_2$ is recently recognized as a suitable cathode active material of a high voltage, high energy lithium rechargeable batteries because $Li^+$ ion can be electrochemically deintercalated/intercalated from/to $Li_xCoO_2$. The transition metal oxide of $LiCoO_2$ was investigated for using as a cathode active material of 4V class Li rechargeable cell. $LiCoO_2$ cathode was prepared by using a active material of 85 wt%, graphite powder of 12 wt% as a conductor and poly-vinylidene fluoride of 3 wt% as a binder. The electrochemical and charge/discharge properties of $LiCoO_2$ were investigated by cyclic voltammetry and galvanostatic charge/discharge. The open circuit voltage of prepared $LiCoO_2$ electrode exhibited approximately. potential range between 3.32V and 3.42V. During the galvanostatic charge/discharge, $LiCoO_2/Li$ cell showed stable cycling behavior at scan rate of 1mV/sec and potential range between 3.6V and 4.2V. Also its coulombic efficiency as function of cycling was 81%~102%. In this study the $LiCoO_2/Li$ cell showed the available discharge capacity of 90.1 mAh/g at current density of $1mA/cm^2$ and cell discharge voltage range between 3.6V~4.2V.

• Analytical Science and Technology
• /
• v.8 no.1
• /
• pp.63-68
• /
• 1995

For the preparation of pH-selectrode, tribenzylamine, polyvinylchloride, dioctylphthalate, sodium tetraphenylborate and tetrahydrofuran were mixed with 0.02, 0.62, 1.34, 0.02g and 10ml respectively, and added 1g of acetylene black, graphite, silicon carbide or tungsten carbide respectively to improve electric conductivity. The selectrodes of seven kinds were shown linear to hydrogen ion in the range of pH 2 and 9. The best electric conductor for preparation of pH-selectrode based on tribenzylamine as neutral carrier was acetylene black and responded potential of the selectrode to hydrogen ion was shown the values near to theoretical Nernstian slope at $20^{\circ}C$. The interfering effects of the selectrode on hydrogen ion in the presence of alkali and alkaline earth metal ions were shown the better results with less error than glass electrode. The reproducibility and stability were good for use as a selectrode, especially in the presence of fluoride ion.

• Clinical and Experimental Reproductive Medicine
• /
• v.25 no.2
• /
• pp.161-170
• /
• 1998

Protein expression patterns of matrix metalloproteinases (MMPs) were examined in mouse reproductive organs during estrous cycle. Estrous cycle was classified into diestrus, proestrus, estrus or metestus and MMP expression was analyzed by zymography using gelatin as a substrate. Uterine fluid (UF) obtained both at diestrus and proestrus exhibited 4 major MMPs including 106kDa, 64kDa, 62kDa and 59kDa gelatinases. However, in UF at estrus, the gelatinolytic activity of 64kDa MMP disappeared and that of 106kDa and 62kDa MMPs dramatically decreased. At metestrus, 64kDa MMP activity reappeared and 106kDa and 62kDa MMP exhibited increased activities such that the band intensity of 106kDa was comparable to that in UF at diestrus. Gelatinolytic activity of 59kDa MMP was not changed throughout the cycle. Both ovarian and oviductal tissue homogenate revealed 4 MMPs which corresponded to the 4 MMPs of UF. However, unlike UF MMPs, gelatinolytic activity of these MMPs did not show distinct changes throughout the cycle. Either an inhibitor of MMP, 1,10-phenanthroline, or a metal chelator, EDTA, abolished the appearance of the above MMP activities in gelatinated gel whereas a serine proteinase inhibitor, phcnylmethylsulfonyl fluoride, failed to inhibit the appearance of MMP activities, proving that gelatinolytic activity of the above reproductive tissues were due to the enzymatic activity of MMP. When gclatinolytic activity of mouse serum was examined, it revealed 5 MMPs (131kDa, 106kDa, 89kDa, 64kDa and 62kDa bands) and one gelatinase (84kDa) band. From these results, it is concluded that the protein expression of MMPs of mouse reproductive organs, particularly uterus, is temporally regulated during estrous cycle and uterine 106kDa, 64kDa and 62kDa MMPs are suggested to play an important role in cyclic tissue remodeling of mouse uterus.

• Composites Research
• /
• v.34 no.6
• /
• pp.357-372
• /
• 2021

The energy harvesting device is known to be promising as an alternative to solve the resource shortage caused by the depletion of petroleum resources. In order to overcome the limitations (environmental pollution and low mechanical properties) of piezoelectric elements capable of converting mechanical motion into electrical energy, many studies have been conducted on a polymer matrix-based composite piezoelectric energy harvesting device. In this paper, the output performance and related applications of the reported piezoelectric composites are reviewed based on the applied materials and processes. As for the piezoelectric fillers, zinc oxide, which is advantageous in terms of eco-friendliness, biocompatibility, and flexibility, as well as ceramic fillers based on lead zirconate titanate and barium titanate, were reviewed. The polymer matrix was classified into piezoelectric polymers composed of polyvinylidene fluoride and copolymers, and flexible polymers based on epoxy and polydimethylsiloxane, to discuss piezoelectric synergy of composite materials and improvement of piezoelectric output by high external force application, respectively. In addition, the effect of improving the conductivity or the mechanical properties of composite material by the application of a metal or carbon-based secondary filler on the output performance of the piezoelectric harvesting device was explained in terms of the structure of the composite material. Composite material-based piezoelectric harvesting devices, which can be applied to small electronic devices, smart sensors, and medicine with improved performance, can provide potential insights as a power source for wireless electronic devices expected to be encountered in future daily life.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.27 no.3
• /
• pp.45-56
• /
• 2024

Heavy metals emitted from urban development do not decompose in the soil and remain for long periods, continually impacting the environment. Since the mid-1990s, there has been increasing societal concern in South Korea regarding soil contamination, prompting various legislative revisions to reduce pollution. This study utilizes the Environmental Impact Assessment Support System (EIASS) to investigate projects in the metropolitan area that have exceeded the Ministry of Environment's soil contamination concern levels from 1989 to 2022 and to examine improvements in the environmental impact assessment (EIA) process. The results reveal that the average concentrations of nine contaminants-cadmium (Cd), copper (Cu), arsenic (As), mercury (Hg), lead (Pb), hexavalent chromium (Cr6+), zinc (Zn), nickel (Ni), and fluoride (F)-have all increased over the years. Among these, Zn had the highest relative proportion, with 37.5% of the 40 sites exceeding environmental concern levels. Investigation of 19 specific projects at these exceedance sites showed that only 7 had documented analyses of contamination causes and remediation plans, and just one had contracted additional remediation services, though results from these efforts were found to be lacking. Furthermore, since 2019, a significant proportion of these sites were involved in residential developments, likely due to government initiatives in new city development and extensive housing supply plans. This research emphasizes the importance of public disclosure of the processes and outcomes of remediation efforts on historically contaminated soils prior to project development. It discusses improvements to the EIA by reviewing current legislation and international examples. The findings of this study are expected to heighten public awareness about heavy metal contamination and enhance transparency in soil remediation efforts, contributing to sustainable environmental management and development.

• Korean Journal of Agricultural Science
• /
• v.16 no.2
• /
• pp.225-238
• /
• 1989

These studies were conducted to investigate the extraction, purification and characterization of oriental pear (Niitaka. Pyrus pyrifolia Nak.) protease, and the results obtained were as follows: 1. Oriental pear protease was effectively extracted by the method of homogenizing pear pulp with 0.7 volume of 0.1M-sodium phosphate buffer, pH 6.5 containing 5mM-cysteine, 40mM-2-mercaptoethanol and 2mM-EDTA at 10,000 rpm for 5 min. 2. The protease was purified by ammonium sulfate fractionation, Sephadex G-100 filtration and DEAE-Sephadex A-50 column chromatography, and the purified enzyme gave a single protein band on polyacrylamide gel electrophoresis. 3. The specific activity of purified enzyme was 29.65 unit/mg protein and the yield was 7.22%. 4. The moecular weight of the protease was estimated to be about 51,000 by SDS-polyacrylamide gel electrophoresis, and the enzyme had Km value of 54.5 mg/ml for casein. 5. The purified enzyme had a maximum activity at pH 6.0 and $50^{\circ}C$, and was stable from pH 5.5-6.5 and at temperatures below $50^{\circ}C$ 6. Casein was a better substrate for this protease compared to hemoglobin. 7. The enzyme activity was markedly inhibited by p-chloromercuribenzoic acid and heavy metal salts such as $HgCl_2$ and $MnSO_4$ also considerably inhibited the enzyme activity.

• Journal of Oral Medicine and Pain
• /
• v.30 no.2
• /
• pp.215-230
• /
• 2005

The study was intended to investigate how dentists in private dental clinic thought on the present claim and review of dental insurance to reflect it in future establishing dental insurance policies. 1,465 dentists who were running own dental clinic in Pusan Metropolitan City and the south part of Kyungsang province were surveyed in February, 2004. A total of 406 copies of finished questionnaire were finally retrieved and analyzed. The findings are as follows. 1. About insurance claim affairs : Most of the subject of insurance claim was by dentist himself or dental hygienist(nurse). Agency claiming was carried under 20% of total insurance claim. 2. The degree of attendance on insurance lecture : The degree of attendance on insurance lecture was relatively low. 3. Filing a protest against insurance claim : Filing a protest against insurance claim was reavealed about half-and-half for "have been" or "have not been". 4. Private clinic dentist,s opinion about the regulations affecting review of dental insurance : Private clinic dentists opinion about current guide for insurance review of dental fee was“the guidance is difficult and unfair cutback of claim fee may be carried”. 5. The affairs about health insurance review agency : About 70% of private clinic dentists have dissatisfaction on health insurance review agency. 6. Standpoint of private clinic dentists about issuance of receipt for dental fee : About 70% of private clinic dentist have an difficulty in issuance of receipt for dental fee. 7. The affairs about change insurance noncoverage treatment to insurance coverage treatment : Most of private clinic dentists hoped that insurance coverage about full mouth scaling, pit and fissure sealant, fluoride application. But they do not hoped that insurance coverage about geriatric denture, prothodontic treatment except precious metal, photopolymerization resin treatment.