• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.174-177
• /
• 2008

This paper replaces an conventional 300-austenitic stainless steel sheet to a 400-ferritic stainless steel for the cost reduction of a pulsator cover of a washing machine. However, ferritic stainless steel has poor formability in comparison with austenitic one. The low formability of ferritic steel results in problems during stamping such as fracture, wrinkling, shape inaccuracy and so on. Design modification of the stamping tool is carried out with the aid of the finite element analysis for multi-stage stamping process. The simulation results show that fracture occurs on top of the product while wrinkles are generated by the excess metal near the wing part. Modification of the initial stamping die is performed to improve metal flow and to eliminate problems during the stamping process. Simulation with the modified design fully demonstrates that safe forming is possible without inferiorities.

• 센서학회지
• /
• 제22권4호
• /
• pp.297-301
• /
• 2013

We proposed and demonstrated a distributed fiber-optic overheating detection sensor using optical time domain refrectometry. With increased of temperature the optical fiber is bended by a bi-metal and it result in optical leaky loss of the fiber. The sensor structure is designed in such a way that the signal of overheating is happen when the temperature exceeding a threshold temperature and the optical fiber is protected from excess bending.

• Bulletin of the Korean Chemical Society
• /
• 제17권2호
• /
• pp.138-142
• /
• 1996

The transition metal carbonylate, PPN+(${\eta}^5-MeCp)Mn(CO)_2Cl^-$ undergoes a novel ligand substitution reaction with PR3 (R=Me, Et, OEt, $C_6H_5$ in THF at elevated temperatures (40 $^{\circ}C$ up to 60 $^{\circ}C)$ under the pseudo-first-order reaction conditions (usually 20-fold excess of PR3 with respect to metal carbonylate concentrations) where chloride is displaced by PR3. The reaction follows overall first order dependence on [(${\eta}^5-MeCp)Mn(CO)_2Cl^-$]; however, the negative entropy changes of activation (${\Delta}S^{\neq}$=-19.3 e.u. for $P(OEt)_3$; ${\Delta}S^{\neq}$=-16.4 e.u. for $PPh_3$) suggest the existence of the intermediate, ((η3-MeCp)Mn(CO)2(THF)Cl-, which eventually transforms to the product (${\eta}^5-MeCp)Mn(CO)_2(PR_3)$.

• 대한전자공학회논문지SD
• /
• 제46권3호
• /
• pp.51-59
• /
• 2009

본 논문에서는 어쿠스틱 센서 IC 용 연속 시간 시그마-델타 모듈레이터를 구현하였다. 모듈레이터의 전력 소모를 최소화하기 위해 summing 단의 필요성을 제거한 피드-포워드 (feed-forward) 구조로 설계 하였으며, 해상도를 높이기 위해 선형성이 우수한 active-RC 필터를 사용하여 설계 하였다. 또한 초과 루프 지연 시간 (excess loop delay)에 의한 성능 저하를 방지하기 위한 회로 기법을 제안 하였다. 저 전압, 고 해상도의 4차 단일 비트 연속 시간 시그마-델타 모듈레이터는 $0.13{\mu}m$ 1 poly 8 metal CMOS 표준 공정으로 제작하였으며 코어 크기는 $0.58\;mm^2$ 이다 시뮬레이션 결과 25 kHz 의 신호 대역 내에서 91.3 dB의 SNR(signal to noise ratio)을 얻었고 전체 전력 소모는 $290{\mu}W$ 임을 확인하였다.

• 대한기계학회논문집B
• /
• 제35권10호
• /
• pp.1033-1040
• /
• 2011

예혼합 버너는 높은 효율과 낮은 배기 때문에 가정용 보일러 버너 시스템에 매우 강력한 버너이다. 일반적으로 가정용 보일러 버너는 내부에 농후한 예혼합 불꽃으로 구성하고 연료는 2차공기의 공급에 의하여 완전연소 되는 분젠 버너를 이용한다. 이것은 상대적으로 긴 불꽃 길이와 높은 과잉공기비에서 작동하기 때문에 높은 효율을 갖는 소형 보일러에 적용하기 어렵다. 이 논문에서 메탈 화이버, 세라믹, SUS 핀과 같은 매질을 사용하는 예혼합 연소 버너의 특징을 실험하였다. 특히, 표면 매질의 비반응 유동 특성은 버너 표면 전체의 유동 속도를 측정하고 조정하였다. 연소 실험은 화염 사진과 화염 온도 측정에 의하여 수행되었다. CO와 NO는 다양한 과잉 공기비와 열량값에 대하여 버너 표면 매질, 연소실, 열교환기의 특성을 측정하고 평가하였다.

• Nuclear Engineering and Technology
• /
• 제41권5호
• /
• pp.709-714
• /
• 2009

An ion implanter, which can serve as a metal-ion supply, has been constructed and performance tested. Copper ions are generated and extracted from a Bernas ion source with a heating crucible that provides feed gases to sustain the plasma. Sable arc plasmas can be sustained in the ion source for a crucible temperature in excess of $350^{\circ}C$. Stable extraction of the ions is possible for arc Currents less than 0.3 A. Arc currents increase with the induced power of a block cathode and the transverse field in the ion source. $Cu^+$ ions in the extracted beam are separated using a dipole magnet. A $20{\mu}A$ $Cu^+$ ion current can be extracted with a 0.2 A arc current. The ion current can support a dose of $10^{16}ions/cm^2$ over an area of $15\;cm^2$ within a few hours.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 춘계학술대회 논문집
• /
• pp.92-97
• /
• 2002

By changing the excess air ratio which affects strongly to the combustion characteristics, the flame stability range in the metal fiber burner were found and the range of the blue flame male and radiant mode were distinguished by direct photography. The results in our experiments for the flame stability zone were from a=1.4($354 KW/m^2$) to a=2.06($240 KW/m^2$), and then the blue flame mode zone was form a=1.87($266 KW/m^2$) to a=2.06($240 KW/m^2$) and the radiant mode one was form a=1.4($354 KW/m^2$) to a =1.78($278 KW/m^2$). And the flame was not fired when a is less than the lean condition a=2.45($202 KW/m^2$).

• 대한한방소아과학회지
• /
• 제23권1호
• /
• pp.115-126
• /
• 2009

Objectives The purpose of this study is to introduce oriental medicine music therapy related to the treatment of ADHD. Methods This study observed ADHD from the oriental medical point of view and tried to treat this disease with the oriental medicine music therapy. Results ADHD is caused by excess of Yang energy, flaming-up of fire, blood deficiency of the heart and the spleen, deficiency of the kidney essence, and instability of emotions. The ADHD patients with the case of excess of Yang energy and flaming-up of fire, patients were played Fire-Gi rhythm as a treatment, and they listened to Metal-Gi music. Whereas, the ADHD patient with blood deficiency of the heart and the spleen, invigoration of vital energy music therapy can be used. Another case of ADHD patients with deficiency of the kidney, Water-Gi rhythm and replenishing vital essence music therapy can be used. According to the patients' seven modes of emotions, the proper music should be chosen. Conclusions Oriental medicine music therapy can be a new type of treatment for ADHD patients.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.412-415
• /
• 2017

본 연구에서는 금속을 담지한 alumina bead 촉매를 이용하여 ammonium dinitramide (ADN)기반 단일액상추진제 분해 성능 분석을 수행하였다. Alumina bead를 $1200^{\circ}C$에서 소성한 후, 회전 증발기를 이용하여 과량 용액 함침법 (Excess water impregnation)으로 alumina bead에 Pt 및 Cu 를 담지하였다. 자체 제작한 batch 반응기에서 ADN기반 단일액상추진제 분해 온도($T_{dec}$)를 측정하였다. Cu/$Al_2O_3$ 촉매가 Pt/$Al_2O_3$ 촉매에 비해 분해 온도가 더 낮게 나타났으며, $T_{dec}$ 는 약 $130^{\circ}C$이었다.

• 천문학회보
• /
• 제38권2호
• /
• pp.38.2-38.2
• /
• 2013

Several studies have reported the presence of sodium excess objects having neutral atomic absorption lines at $5895{\AA}$ (NaD) and $8190{\AA}$ that are deeper than expected based on stellar population models that match the stellar continuum. The origin of these lines is therefore hotly debated. van Dokkum & Conroy proposed that low-mass stars (0.3M) are more prevalent in massive early-type galaxies, which may lead to a strong NaI 8190 line strength. It is necessary to test this prediction, however, against other prominent optical line indices such as NaD, Mgb, and Fe5270, which can be measured with a significantly higher signal-to-noise ratio than NaI 8190. We identified a new sample of roughly one thousand NaD excess objects (NEOs; ~8% of galaxies in the sample) based on NaD line strength in the redshift range 0.00${\alpha}$-enhanced" ([${\alpha}/Fe$] ~ 0.3), "metal-rich" ([Z/H] ~ 0.3), and, especially, "Na-enhanced" ([Na/Fe] ~ 0.3).