• 전기화학회지
• /
• 제15권3호
• /
• pp.135-148
• /
• 2012

Ionic liquids are steadily attracting interests throughout a recent decade and their application is expanding into various fields including electrochemistry due to their unique properties such as non-volatility, inflammability, low toxicity, good ionic conductivity, wide electrochemical potential window and so on. These features make ionic liquids become an alternative solution for electrodeposition of metals that cannot be electroplated in aqueous electrolytes. In this review, we classify investigated metals into three categories, which are light (Li, Mg), refractory (Ti, Ta) and noble (Pd, Pt, Au) metals, rather than covering the exhaustive list of metals and try to update the recent development in this area. In electrodeposition of light metals, granular fine Li particles were successfully obtained while the passivation of electrodeposited Mg layers is an obstacle to reversible deposition-dissolution process of Mg. In the case of refractory metals, the quality of Ta and Ti deposit particles was effectively improved with addition of LiF and pyrrole, respectively. In noble metal category, EMIM TFSA ionic liquid as an electrolyte for Au electrodeposition was proven to be effective and BMP TFSA ionic liquid developed a smooth Pd deposit. Pt nanoparticle production from ionic liquid droplet in aqueous solution can be cost-effective and display an excellent electrocatalytic activity.

• 품질경영학회지
• /
• 제21권2호
• /
• pp.242-253
• /
• 1993

The interpretation of the reaction mechanism is significant to produce the high quality welds and understand the welding processes. This investigation is important for the design of welding consumables and the selection of welding process parameters to develop the high quality welds. The objective of this study is to investigate the effect of electrochemical reactions on the transfer of alloy elements between slag and weld metal during submerged arc welding During submerged arc welding weld metal composition is shown to be controlled by two reaction mechanisms in four reaction zones. The responsible reaction mechanisms are thermochemical and electrochemical reactions. The possible reaction sites are the melted electrode tip, the detached droplet, the hot weld pool immediately below the moving electrode, and the cooling and solidifying weld pool behind the moving electrode. The possible reactions in submerged arc welding at different zones of the process is schematically shown in Figure 1.

• Journal of Welding and Joining
• /
• 제11권1호
• /
• pp.73-79
• /
• 1993

The phenomenon of metal transfer has been investigated for different transfer modes using a digital high speed motion analyzer and an arc shadow-graphing system based on a laser source and related optical system. It was observed that the pinch instability phenomenon did not occur for the globular transfer mode, since the liquid globule was then spherical rateher than a cylindrical liquid bar. On increasing the ratio of carbon dioxide to argon, the transition current from globular to spray transfer generally increased, but it is interesting that the transition was observed to occur at the lowest current in a 5% CO$_{2}$-95% argon gas mixture. For pure carbon dioxide and helium shielding gases, the drop frequency increased slowly with increasing current. At high currents or an argon based shielding gas, the length of liquid bar decreased as the carbon dioxide content increased. The acceleration of a droplet within the arc was determined using the gas drag force theory and was found to be greater than the experimental results.

• 한국분무공학회지
• /
• 제17권1호
• /
• pp.20-26
• /
• 2012

Inkjet printing is one of the direct writing technologies and is able to form a pattern onto substrate by dispensing droplets in desired position. Also, by inkjet technology manufacturing time and production costs can be reduced, and procedures can be more efficient. To form a metal pattern, it must be harmonized with conductive nano ink, printing process, sintering, and surface treatment. In this study, micro patterning of conductive line has been investigated using the piezoelectric printhead driven by a bipolar voltage signal is used to dispense $20-40{\mu}m$ diameter droplets and silver nano ink which consists of 50 nm silver particles. In addition, hydrophobic treatment of surface, overlap printing techniques, and sintering conditions with changing temperature and times to achieve higher conductivity.

• 한국안전학회지
• /
• 제20권3호
• /
• pp.105-111
• /
• 2005

An experimental study is performed for extinguishing of n-heptane pool fire by water mist containing potassium acetate as a fire suppression additive. Water mist was generated by a single pressure nozzle in a small-scale chamber. The drop size distribution of water mist was measured using laser diffraction(Malvern particle sizer). The flame temperature, oxygen concentration and carbon monoxide concentration were measured. In case of using additives, the fire extinguishing time was shorter than that of pure water at a given discharge pressure and it was because the momentum of a water droplet containing additives was increased. And also dissociated metal atoms, potassium, were reacted as a scavenger of the major radical species OH, H which were generated for combustion process. Moreover, at a high pressure of 4MPa, the fire was extinguished through blowing effect as well as primary extinguishing mechanisms.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.155-155
• /
• 2011

반도체 양자링은 양자점과 같이 효율이 높은 광학 소자 및 전자 소자에 응용 가능할 뿐 아니라, 양자점과는 다른 흥미로운 현상 연구가 가능하기 때문에 지속적으로 연구되고 있는 양자 구조이다. 특히, 반도체 양자링은 다양한 양자 구조를 형성하기 위한 기초 구조로 사용될 수 있으므로, 반도체 양자링 구조의 형성 메카니즘을 연구하는 것 또한 중요하다. 본 연구에서는 Molecular Beam Epitaxy (MBE)를 이용하여 N-type (100) GaAs 기판 위에 GaAs 양자 구조를 형성하였다. As4 분압의 영향, 즉 3-5 ratio가 표면 양자 구조 변화에 미치는 영향을 관찰하기 위해 3족과 5족을 분리하여 성장하는 전형적인 성장 방식인, droplet epitaxy mode를 사용하였다. 성장 온도, Ga metal droplet 밀도 등의 조건을 고정하고 Arsenic 분압을 1e-5 torr부터 3e-8 torr로 감소시켰을 때 표면 이미지를 AFM과 SEM으로 관찰하였다. As4 분압이 1e-5 torr일 때 양자점의 표면 형상을 보여주다가 As4 분압을 줄여갈수록 양자점의 크기가 증가하면서 As4 분압 1e-6 torr에서는 SEM 이미지 상으로도 분명한 양자링을 관찰할 수 있었다. 특히 주목할 것은 As4 분압 1e-6 torr에서 더 줄여갈수록 양자링 중앙 부분의 낮은 부분이 점점 넓어졌다는 점이다. 이것은 As4 분압 1e-6 torr 이상의 조건이 As4와 Ga atom이 결합하여 GaAs 양자점을 형성하는데 적절한 3-5 ratio의 조건인 반면, 그보다 적은 As4 분압에서는 As4와 결합하지 못한 Ga atom의 표면 migration에 의한 driving force로 인해 양자링이 형성되었다고 추측할 수 있다. 이렇게 형성된 양자링을 열처리 후 macro-PL 측정을 통해 광학적 특성을 보고자 하였다. 그 결과 같은 조건에서 열처리되어 PL 측정한 양자점의 에너지에 비해 peak position이 blue shift한 것을 볼 수 있었다. 이것은 As4를 제외한 같은 조건에서 성장된 양자 구조에서 양자링의 경우 양자점에 비해 그 높이가 낮음을 추측해 볼 수 있다. 양자 구조의 모양과 광학 특성의 관계를 밝히기 위해 추후 추가 측정 및 분석이 필요할 것이다.

• 대한기계학회논문집B
• /
• 제35권10호
• /
• pp.1097-1103
• /
• 2011

액적충돌침식은 증기나 공기에 포함된 액적이 금속 소재에 고속으로 충돌할 때 모재가 손상되는 현상이다. 액적충돌침식 손상은 증기터빈이나 빗방울과 부딪치는 항공기에서 주로 발생되어 왔으나 최근에는 원전 배관에서도 발생하고 있다. 원전 배관 중에서도 특히 높은 압력강하가 발생하고 2상 증기가 흐르는 배관에서 주로 발생한다. 실제 2011년 초반 국내 한 원전에서는 2상 증기가 흐르는 배관에서 액적충돌침식 손상으로 인한 누설이 발생한 바 있다. 본 논문에서는 액적충돌침식 손상이 발생한 배관에 대하여 손상을 억제할 수 있는 설계변경 방안에 관한 연구를 수행하였다. 설계변경은 유체 유동측면에서 분석하였으며, 상용 수치해석 코드인 FLUENT를 이용하였다.

• 한국유체기계학회 논문집
• /
• 제11권5호
• /
• pp.50-56
• /
• 2008

Metal cutting operations involve generation of heat due to friction between the tool and the pieces. This heat needs to be carried away otherwise it creates white spots. To reduce this abnormal heat cutting fluid is used. Cutting fluid also has an important role in the lubrication of the cutting edges of machine tools and the pieces they are shaping, and in sluicing away the resulting swarf. As a cutting fluid, water is a great conductor of heat but is not stable at high temperatures, so to improve stability an emulsion type mixed fluid with water and oil is often used. It is pumped over the cutting site of cutting machines as a state of atomized water droplet coated with oil by using jet. In this paper, to develop cutting fluid supplying nozzle to obtain ultra thin oil film for coating water droplet, a numerical analysis of three dimensional mixed fluid Jet through multi-stage nozzle was carried out by using a finite volume method. Jet flow characteristics such as nozzle exit velocity, development of mixing region, re-entrance and jet intensity were analyzed. Detailed mixing process of fluids such as air, water and oil in the nozzle were also investigated. It is easy to understand complex flow pattern in multi-stage nozzle. Important flow Information for advance design of cutting fluid supplying nozzle was drawn.

• 한국산학기술학회논문지
• /
• 제12권5호
• /
• pp.2019-2024
• /
• 2011

GMA용접 공정에서 콘택트팁의 마모가 용접비드에 미치는 영향에 대해서 연구하였다. 콘택트팁과 용접비드 사이의 연관성을 조사하기 위하여 초고속 카메라와 파형분석을 이용하여 용적이행을 관찰하였고, 저 배율의 카메라로 비드의 상태를 관찰하였다. 콘택드팁의 마모는 팁과 용접와이어 사이의 접촉 지점을 변화시켜 결과적으로 불규칙비드를 생성하였다. 이것은 마모된 콘택트팁이 용접시 용접저항의 변화를 초래하여 용접아크 불안정의 원인이 되기 때문이다.

• Journal of Welding and Joining
• /
• 제21권2호
• /
• pp.57-63
• /
• 2003

Since new types of vehicles or structures made from thin aluminum alloy are under rapid development and some products are already on the market, welding of aluminium sheet is increasing. MIG(Metal Inert Gas), MIG-Pulse, TIG(Tungsten Inert Gas) welding are the typical Ai welding. MIG welding has the advantage of high speed, but it is difficult to apply to the thin plate, because of bum-through by the high heat input and spatter. MIG-Pulse welding can weld without spatter and burn-through, but when the gap exists at the welding joint, there is quite a possibility of bum-through. TIG welding is difficult to weld at a high speed. AC Pulse welding alternates between DCEP(Direct Current Electrode Positive) and DCEN(Direct Current Electrode Negative). DCEN is higher wire melting rate than DCEP, while lower temperature of droplet than DCEP. In AC Pulse welding, far fixed welding current, wire melting rate increases as the EN ratio increases. For fixed wire feed rate, welding current decreases as the EN ratio increases. Because of these features, the temperature of droplet, the depth of penetration, the width of bead decrease and the reinforcement height increases as EN ratio increases, and these are able to weld at a high speed, lower heat input. It is the purpose of this study that design of AC pulse current waveform for MIG welding of Al sheet and estimation of output characteristic.