• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.225.1-225.1
• /
• 2010

Within recent years attention has been focused on the method of hydrogen storage using metal hydride reactor due to its high energy density, durability, safety and low operating pressure. In this paper, a numerical study is carried out to investigate the coupled heat and mass transfer process for absorption in a cylindrical metal hydride hydrogen storage reactor using a newly developed model. The simulation results demonstrate the evolution of temperature, equilibrium pressure, H/M atomic ratio and velocity distribution as time goes by. Initially, hydrogen is absorbed earlier from near the wall which sets the cooling boundary condition owing to that absorption process is exothermic reaction. Temperature increases rapidly in entire region at the beginning stage due to the initial low temperature and enough metal surface for hydrogen absorption. As time goes by, temperature decreases slowly from the wall region due to the better heat removal. Equilibrium pressure distribution appears similarly with temperature distribution for reasons of the function of temperature. This work provides a detailed insight into the mechanism and corresponding physicochemical phenomena in the reactor during the hydrogen absorption process.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.2
• /
• pp.105-111
• /
• 2016

Ultrasonic metal welding, unlike the conventional welding techniques, does not require an external heat source, welding rod, or filler metal. Therefore, ultrasonic metal welding is not only economical but also environment-friendly, and hence, it has been receiving much attention. In ultrasonic welding, heat is generated because of the plastic deformation and the friction between both surfaces of the welded materials. It is important to identify the heat-affected zone by measuring the temperature generated at the weld. In this study, the effects of the welding pressure, welding time, and vibration amplitude on the temperature distribution in the weld were evaluated by performing a transient thermal analysis of the heat generated during ultrasonic metal welding. The experimental results indicated that the temperature of the weld tends to increase with the welding time and vibration amplitude. However, an increase in the pressure does not affect the temperature of the weld largely.

• Journal of environmental and Sanitary engineering
• /
• v.19 no.1
• /
• pp.17-23
• /
• 2004

This study was investigated the distribution characteristics of heavy metal concentrations in soils around abandoned mines in Pochon city. The abandoned mines were Youngjung, Yongsog and Pochon. The results were as follows: 1) Heavy metal mean concentrations in minewastes were detected Cr 100.119 mg/kg, Cu 189.400 mg/kg in Youngjung mine, Cr 198.440 mg/kg, As 160.480 mg/kg in Yongsog mine and Cr 84.680 mg/kg, Zn 50.280 mg/kg in Pochon mine. 2) The mean concentrations in soils which is around mines were Cu 62.351 mg/kg in Youngjung mine, and As 95.024 mg/kg, Hg 11.279 mg/kg in Yongsog mine. All materials in Pochon mine were detected low level. 3) The concentrations of heavy metal showed low or not detected in water system (groundwaters, streams and sediments).

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.709-713
• /
• 1996

The ceramic has such high qualities as light weight, abrasion resistance, heat resistance compared with metal, but since it is breakable, it can't be used as structural material and it is desirable to joining metal which is full of toughness, but, according as the ceramic/metal joint is executed at high temperature, the joint residual stress develops near the joint sides in the process of cooling the high temperature down to the suitable temperature due to difference of the thermal expansion coefficient between ceramic and metal, and the joint residualstress lowers the fracture strength. In this study, to ensure security and improvement of bending strength, 1 studies on see distribution shape of residual stress according to high thermal cycle, and the influnence of theraml cycle and distribution shape of residual stess on joint-strength.

• Analytical Science and Technology
• /
• v.6 no.5
• /
• pp.463-469
• /
• 1993

HDBPDA ion exchange resin, {(4, 5) : (13, 14)-Dibenzo-6, 9, 12-trioxa-3, 15, 21, -triazabicyclo [15. 3. 1]heneicosa-(1, 17, 19)(18, 20, 21) triene ion exchange resin : HDBPDA ion exchange resin} had a capacity of 3.8meq/g dry resin. The distribution coefficients of alkali and alkaline earth metal ions on HDBPDA and strongly acidic cation exchange resin, Dowex 50W-X8(200-400mesh) in water, and the various concentrations of hydrochloric acid were determined. Concentration of hydrochloric acid have almost not influenced on the distribution coefficients of alkali and alkaline earth metal ions for the HDBPDA ion exchange resin, but generally the distribution coefficient slightly increased with decreasing concentration of hydrochloric acid. The distribution coefficients of metal ions in water are larger than those in various hydrochloric acid concentration. The distribution coefficients of alkali and alkaline earth metal ions for the Dowex 50W-X8 ion exchange resin increased with decreasing hydrochloric acid concentration. Especially, the distribution coefficients of alkaline earth metal ions increased rapidly compared to those for alkali metal ions. The distribution coefficients of alkali and alkaline earth metal ions on HDBPDA ion exchange resin increased in a linear manner with decreasing acid concentration, and the slope, d log Kd/d log $M_{HCl}$ is about -0.2. Of the distribution cofficients of alkali metal ions on Dowex 50W-X8, at range of moderate hydrochloric acid concentration, the slope is about -1, while the slope for alkaline earth metal ions is about -2. However, at very low hydrochloric acid concentration, the linear variation between distribution coefficient and acid concentration was not occurred, but the slope was deviated from above values at low acid concentration.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.4
• /
• pp.142-150
• /
• 2001

Automotive manufactures have taken more interests in tailored sheet metals for improving the rigidity, weight reduction, crash durability, and cost savings so that their application to auto-bodies has been increased. However, since the tailored sheet metals do not behave like un-welded sheet metals in press forming operations, the stamping engineers no longer rely only on conventional forming techniques. Futhermore, there is no clear understanding of the characteristics of welded metal which influence the overall press formability of tailored sheet metals. Recently, the computer simulations are prevailing for the evaluation of the formability. Unfortunately, the mechanical property of tailored sheet metal has to be quantitatively defined in the simulation. In this study, the analytical equations are formulated in order to find the mechanical properties of the welded metal in the tailored sheet metal welded by co$_2$laser. Based on force distribution assumption, the constitutive behavior of the welded metal is investigated using uniaxial tensile test results of base metals and tailored sheet metal. Then, the strength coefficient, work-hardening exponent, and plastic strain ratio of laser-welded metal are calculate from those of base metals and tailored sheet metal. In addition, the existence of weld defects in the welded metal is indirectly detected by examining the slop of strength coefficient of the welded metal.

• Transactions of Materials Processing
• /
• v.1 no.1
• /
• pp.87-94
• /
• 1992

An analytical method has been presented for the study of the superplastic bulging process of sheet metal. Through this method, it is possible to obtain the optimum pressure-time curve for the superplastic forming and to predict the thickness distribution of bulged sheet metal with less computational cost than that by finite element analysis. Experiments have been performed to confirm the results of this analysis with Supral 150 sheets by adopting the computed optimum pressure-time curve. Good agreement between predictions and experimental data has been obtained for the bulged profile and its thickness distribution.

• Structural Engineering and Mechanics
• /
• v.87 no.1
• /
• pp.85-94
• /
• 2023

In the present work, thermal buckling and post-buckling behaviors of imperfect graphene platelet reinforced metal foams (GPRMFs) doubly curved shells are examined. Material properties of GPRMFs doubly curved shells are presumed to be the function of the thickness. Reddy' shell theory incorporating geometric nonlinearity is utilized to derive the governing equations. Various types of the graphene platelets (GPLs) distribution patterns and doubly curved shell types are taken into account. The nonlinear equations are discretized for the case of simply supported boundary conditions. The thermal post-buckling response are presented to analyze the effects of GPLs distribution patterns, initial geometric imperfection, GPLs weight fraction, porosity coefficient, porosity distribution forms, doubly curved shell types. The results show that these factors have significant effects on the thermal post-buckling problems.

• Journal of the Korean Chemical Society
• /
• v.9 no.1
• /
• pp.61-65
• /
• 1965

Metal distribution in the reaction products and system of reactions between organo chloro acid or ester and zinc, silicon, magnesium, and tin under acetonitrile, dioxane, and toluene solvent were determined by means of radioactive tracer prepared by means of a (n, ${\gamma}$) reaction. It was found that the solubility of the organo halogen metal complex was markedly increased in a hydrophilic solvent and was decreased in a nonpolar solvent which resulted in an increased metal distribution in the recovered metal or water washing of the recovered metal mixture. This was also true in the case of the reaction conducted in the presence of a carbonyl compound. The relative increase of the solubility of the metal complex in a hydrophilic solvent was in order of zinc, silicon, tin and magnesium, and in a nonpolar solvent, it was in order of silicon, tin, magnesium, and zinc. There was no formation of organo metallics throughout the reaction sequence. The result was discussed and the observed solvent influence on the present reaction path was criticized.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.9
• /
• pp.1317-1323
• /
• 2010

In this study, the weld residual stress distribution at a dissimilar-metal welded plate of low alloy carbon steel and stainless steel, which are widely used in nuclear power plants, was characterized. A plate mock-up with butt welding was fabricated using SA 508 low alloy steel and Type 304 stainless steel plates and the residual stresses were measured by the X-ray diffraction method after electrolytic polishing of the plate specimen. Finite element analysis was carried out in order to simulate the butt welding of dissimilar metal plate, and the calculated weld residual stress distribution was compared with that obtained from the measured data. The characteristics of the three-dimensional residual stress distribution in a butt weld of dissimilar metal plates were investigated by comparing the measured and calculated residual stress data.