• Journal of Environmental Impact Assessment
• /
• v.23 no.2
• /
• pp.75-87
• /
• 2014

In order to analyze environmental impact of livestock manure and organic fertilizers, this study investigated livestock-breeding and pollution loads, the status of individual and public livestock manure treatment facilities, and the status of production, supply and components of compost and liquid fertilizers in the Nonsan area. Also, on a trial basis, this study investigated the life cycle of the environmental impact of livestock manure and its organic fertilizers on stream, groundwater, and agricultural soil. The results are as follows. Firstly, were detected the range of $0.13{\sim}1.32{\mu}g/L$ of As, $0.004{\sim}0.467{\mu}g/L$ of Cd and $0.5{\sim}9.2{\mu}g/L$ of Pb as a harmful substances which show lower concentrations than person preservation criteria of water qualities and aquatic ecosystem. However, it is not clear that heavy metals affect environment such as stream, groundwater and agricultural soil. Secondly, this influence could change according to investigation time and treatment efficiency. As were detected large amounts of persistent organic pollutants(e.g. $14.24{\sim}38.47{\mu}g/L$ of acetylsalicylic acid, $1.17{\sim}2.96{\mu}g/L$ of sulfamethazine, and $2.25{\sim}174.09{\mu}g/L$ of sulfathiazole) in effluent from livestock farms and small amounts of sulfathiazole($ND{\sim}1.63{\mu}g/L$) in the stream, it is necessary to monitor POPs at individual and public livestock manure treatment facilities. However, significant environmental impact did not appear at groundwater and agricultural soil in the test area supplied with liquid fertilizers. These results could be applied to investigate the environmental impact of livestock manure through a comprehensive livestock manure management information system.

• International Journal of Highway Engineering
• /
• v.13 no.2
• /
• pp.187-193
• /
• 2011

The stormwater runoff from road or expressway is known as one of important nonpoint pollution sources. To reduce the pollutants discharge from road or expressway, many best management practices(BMPs) have been applied and planned. Among the BMPs, road sweeping can be effective way to prevent pollutant washoff to environment. This study is performed to evaluate the characteristics of particles collected from the road by sweeping car. Size distribution and pollutant concentration of particles were analyzed. Based on the pollutant concentration and the specification of road such as length, width, and unit for pollutant generation, total amount of pollutant to be removed by road sweeping was estimated. Most of sediments collected by road sweeping was classified into sandy soil and fraction of fine grained soil was low. Although the concentrations of pollutants such as heavy metals in road sediments did not exceed the soil contamination criteria, washout of pollutants during sweeping work by spraying water might cause leaching of pollutants contained in sediments and thus resulted in low pollutant concentrations. Reduced amounts of pollutant by road sweeping showed 31.4% TSS reduction for ${\bigcirc}{\bigcirc}$ region and 7.7% TSS for ${\triangle}{\triangle}$ region. Other pollutants showed low reduction rate, because of their leaching by water spraying. Results from this study indicate that detailed and well-planned investigation for the road sweeping is necessary for the accurate estimation of pollutant reduction from road or expressway.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.04a
• /
• pp.100-101
• /
• 2004

Many researches in Korea have been performed to understand the pollution of stream waters by acid mine drainage. However, few studies have been conducted regarding the effect of particulate and colloidal fractions on the transport of trace metals. To estimate harmful effects of trace metals, it is important to evaluate the particulate and colloidal metals as well as dissolved metals, because particulate and colloidal fractions of trace metals play an important role in transport of trace metals and may adversely affect habitats and organisms in riverine system. Colloids are solids with effective diameters in size range from 0.001 $\mu$m to 1 $\mu$m. According to Jone et al. (1974), metals in surface water, like Al, Fe, and Mn, require filtration with pore-size membranes smaller than 0.45 $\mu$m to define dissolved concentrations. The main objective of this study is to understand the effects of particulate, colloidal, and truly dissolved fractions on the transport and fate of trace metals in acid mine drainage. This study was conducted for the Onjeong creek in the Uljin mine area. Sampling was carried out in 13 sites, spatially covering the area from mine dumps to the downstream Onjeong reservoir. To examine the metal partitioning between particulate, colloidal, and truly dissolved fraction, we used successive filtration techniques consisting of conventional method (using 0.45 $\mu$m membranes) and tangential-flow ultrafiltration (using 0.001 $\mu$mm membranes). Ultrafiltration may seperate much smaller particles from aqueous phase (Josephson, 1984; Hernandez and Stallard, 1988). The analysis of metals were performed by inductively coupled plasma - atomic emission spectrometer (ICP-AES: model Perkin Elmer OPTIMA3000XL). Anions such as SO$_4$, Cl and NO$_3$ were measured with ion chromatograph (IC: model Dionex 120). Sample analysis is still in progress. The preliminary data show that the studied creek is severely polluted by Al, Fe, Mn, Pb and Zn. Toward upstream sites with relatively lower pH, less than 50% of Al and Fe occur in the sorbed form on particles or colloids, whereas more than 80% of Al and Fe occur in the sorbed form in downstream sites or tributaries with relatively higher pH. Less than 30% of Zn is present in particle or colloidal forms in the whole range of creek. Truly dissolved fraction of trace metals is negatively correlated with pH. The Kd values for Al, Fe and Zn consistently increase with increasing pH and decrease with increasing particle concentration.

• Journal of Preventive Medicine and Public Health
• /
• v.32 no.2
• /
• pp.113-122
• /
• 1999

Objectives: The purpose of this study was to describe the trends of original research in the Korean Journal of Preventive Medicine, and to evaluate the quality of original articles about lead poisoning. Method: The data for the analysis of trends in preventive medicine research was taker from a total of 829 original articles published in the Korean Journal of Preventive Medicine from 1968 to 1997, The qualitative meta-analysis was measured against a checklist of evaluation criteria, which were divided into 10 categories, with 46 articles on lead poisoning. The evaluation process was performed independently by two evaluators, Results: The number of articles per 100 members over the study period increased by almost 4 pieces in the early 1980s, and by more than 9 pieces in the mid-1990s. In the major classifications of subjects, environmental and industrial health, epidemiology and health statistics, and health policy and management published 370 pieces (44.0%), 137 pisces (16.5%), 322 pieces (38.9%) respectively. In the order of the number of articles, five themes about health significance, including metal exposure (73 pieces), diseases associated with exposure to organic solvents (45 pieces), air pollution (36 pieces), maternal and child health (32 pieces), and occupational health (3D pieces) received consistent attention throughout the years $1968\sim1997$. The overall mean score of article qualify about lead poisoning was 37.8 out of 50. Of the articles any information on the purpose and hypothesis described well, Of those the originality of the subjects, the form of article's (including tables and figures), and the number of inappropriate words of abstracts showed very low score. For multiple regression analyses, the number of joint research institutes and the acceptance of research grants about the article quality were statistically significant. Conclusions: The number of original research reports in the Korean J Prev Med has recently increased and their subjects bave diversified. Of the basis of this study, the articles need improvement in the areas of abstracts, tables and illustrations (figures), etc. The Korean Society for Preventive Medicine will revise contribution regulations for manuscripts submitted to the Korean J Prev Med. Future studies should address these issues and perform the quantitative mata-analysis about the specific subjects including the quality of articles.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.11
• /
• pp.1205-1214
• /
• 2005

This study was carried out to investigate the emission characteristics of volatile metals(Hg, As, Se) and semi volatile metals such as Pb from small and medium size municipal solid waste incinerators(MSWIs). The concentrations of Hg, Pb, As and Se in emission gas from small size waste incinerators were higher than those of medium size waste incinerators. This is probably due to less air pollutant control devices and high emission gas temperature of the small size waste incinerators relative to the medium size waste incinerators. Emission gas temperature from small and medium size waste incinerators were divided into 2 groups. The first group was about $100^{\circ}C$ and the second roup in the range of $400{\sim}700^{\circ}C$. The concentrations of emission gas at the second group were Hg $70.43\;{\mu}g/Sm^3$, Pb $0.94\;{\mu}g/Sm^3$, As $9.83\;{\mu}g/Sm^3$ and Se $5.05\;{\mu}g/Sm^3$. The concentrations of Hg, Pb, As and Se at the first group were lower than those found at the second group. Besides, the removal efficiencies of Hg in medium size waste incinerators were $55.2{\sim}95.9%$. Emission gas temperature reduction from waste heat boiler(WHB) contribute to control of Hg. Based on above results, we postulate that the temperature of flue gas should play a very important role in volatile metal control in small and medium size MSWIs. In order to improve the volatile metals removal efficiency, the temperature of cooling system must be controlled and the air pollution control device should be operated properly.

• Journal of Conservation Science
• /
• v.32 no.3
• /
• pp.377-384
• /
• 2016

There are physical and chemical method for removement of a lacquered layer existing on the surface when gilding an iron Buddha, these caused environmental pollution by surface degradation and is very noxious for conservation scientist's health. Thus, on this study, we conducted a lacquered layer removement experiments using Nd:YAG Laser which is contactless and eco-friendly. Specimens were made by polishing $5{\times}5$ size of iron(99.9%) specimens surfaces evenly and by differing of number of coating of unrefined lacquer, so there were thickness differences of $10{\mu}m$, $20{\mu}m$, and $30{\mu}m$. The laser machine used in this study was Nd:YAG Laser, and we used two wavelength modes; 1064 nm(160~180 mJ) for infrared light region and 532 nm(50~350 mJ) for ultraviolet light region. The experiment done by investigating the transition of specimens' surfaces with laser wavelength, energy, and numbers of investigation. The remain amount of lacquered layer surfaces before/after laser irradiation was investigated by stereoscopic microscope, observation by SEM, Non-contact Surface Roughness Measurement Device, and FT-IR etc. As a result of each analysis, we could verify the thickness of $10{\mu}m$, $20{\mu}m$ of lacquered layer removed without surface degradation when using 1064 nm wavelength with $1.0J/cm^2$ density. We could find out that Nd:YAG Laser is effective for removing remained lacquered layers when gilding an iron Buddha. In the future, when not only the metal has made various studies also wood lacquered furniture or the like, it seems to be utilized to remove the lacquer without surface damage.

• Analytical Science and Technology
• /
• v.24 no.5
• /
• pp.387-394
• /
• 2011

This study was performed to investigate the contents and leaching characteristics of hazardous wastes from the paint industry. In order to establish a hazardous waste list, samples from industrial discharge have been analyzed for 8 non-regulated inorganic hazardous substances (i.e., Sb, Ni, F, V, Ba, Zn, Be, Se). In more detail, hazardous waste samples from a total of 64 workplaces, e.g. manufacture, formulation, supply and use (MFSU) of coatings, adhesives, sealants and printing inks processing, have been chosen and analyzed. Contents and leaching tests for inorganic metal species in samples show that the non-regulated hazardous substances satisfy all the criteria, while quantitative analyses reveal that some samples of the discharged wastes exceeded the criteria proposed by NIER (National Instituted of Environmental Research). In conclusion, we expect the outcome of this study to align the classification system of hazardous waste management in South Korea with international legislations, and consequently contribute to reduce environmental pollution as well as health risks by toxic wastes.

• Journal of Environmental Impact Assessment
• /
• v.25 no.6
• /
• pp.532-541
• /
• 2016

The National Environmental Specimen Bank (NESB) has been collecting broad leave samples to monitor environmental pollution from five different designated sampling areas. In order to ensure the reproducibility and comparability of the results, all the procedures from selecting trees and pooling leaves to make the representative sample are defined in the standard operation procedures(the SOP). The representative samples were subjected to the chemical analyses for some heavy minerals and Polycyclic Aromatic Hydrocarbons(PAHs). The uncertainty levels involved in each step of the SOP, that is, the sampling and the chemical analysis, were derived using the Robust ANOVA, which enables the relative comparison among the different levels of pollutants concentrations with confidence. Furthermore, the effect of the varying degrees of precipitation on the pollutants concentration of the leaves was also examined. Overall, the biological difference estimated from the duplicate samples was found to exceed the variation across the site, implying even aerial deposition over site. Samples from Gwanak Mt. showed highest heavy metal concentrations than the other sites. Washing off effect of the pollutants adhering in the form of particles on the leaf surface was found to be affected by the cumulative precipitation.

• Environmental Analysis Health and Toxicology
• /
• v.28
• /
• pp.7.1-7.9
• /
• 2013

Objectives We investigated the particle mass size distribution and chemical properties of air pollution particulate matter (PM) in the urban area and its capacity to induce cytotoxicity in human bronchial epithelial (BEAS-2B) cells. Methods To characterize the mass size distributions and chemical concentrations associated with urban PM, PM samples were collected by a 10-stage Micro-Orifice Uniform Deposit Impactor close to nearby traffic in an urban area from December 2007 to December 2009. PM samples for in vitro cytotoxicity testing were collected by a mini-volume air sampler with $PM_{10}$ and $PM_{2.5}$ inlets. Results The PM size distributions were bi-modal, peaking at 0.18 to 0.32 and 1.8 to $3.2{\mu}m$. The mass concentrations of the metals in fine particles (0.1 to $1.8{\mu}m$) accounted for 45.6 to 80.4% of the mass concentrations of metals in $PM_{10}$. The mass proportions of fine particles of the pollutants related to traffic emission, lead (80.4%), cadmium (69.0%), and chromium (63.8%) were higher than those of other metals. Iron was the dominant transition metal in the particles, accounting for 64.3% of the $PM_{10}$ mass in all the samples. We observed PM concentration-dependent cytotoxic effects on BEAS-2B cells. Conclusions We found that exposure to $PM_{2.5}$ and $PM_{10}$ from a nearby traffic area induced significant increases in protein expression of inflammatory cytokines (IL-6 and IL-8). The cell death rate and release of cytokines in response to the $PM_{2.5}$ treatment were higher than those with $PM_{10}$. The combined results support the hypothesis that ultrafine particles from vehicular sources can induce inflammatory responses related to environmental respiratory injury.

• Journal of Korean Society for Atmospheric Environment
• /
• v.8 no.4
• /
• pp.221-228
• /
• 1992

In order to evaluate the degree of air pollution, soils from 125 and 60points of main streets of Seoul and Daejeon, respectively, were sampled and analyzed for the contents of lead, copper, iron and zinc by nitric acid($HNO_3$) extraction followed by atomic absorption spectrophotometry during June and September, 1990. The Pb contents of Seoul and Daejeon were 350.2$\mu$g/g and 175.9$\mu$g/g, respectively, which were 14.5times and 7.3times respectively higher than the control(24.0). In Seoul, the commercial area gave the highest value followed by resdential and industrial areas in the decreasing order, while the order in Daejeon was Industrial, commercial and residential areas. The Cu contents in Seoul and Daejeon were very similar(236.6 and 234.6, respectively) each other, and about 11times higher than the control(20.9). The concentration was highest in industrial, followed by commercial and the lowest in residential areas in Seoul, while the order in Daejeon was industrial, residential and commercial areas. The Fe contents were 25716.5 in Seoul and 22838.6 in Daejeon, both being similar to the control value(22537.0). The value was highest in industrial and next in commercial areas and the lowest in residential area both in Seoul and Daejeon. The Zn contents in Seoul and Daejeon were 728.2 and 404.0, respectively, wihch were 6.3 and 3.6times higher than the control(113.3). The value was highest in commercial and next in industrial areas and the lowest in residental area in Seoul, while the order was industrial, residential and commercial areas in Daejeon. The heavy metal content was higher in the soil of main streets than that of minor streets in Seoul. The content of lead in Seoul was higher in the streets of Chongro-ku(525.9) and Chung-ku(684.8), the central area of the city which had a heavy traffic, than those in Nowon-ku(320.3) and Kwanak-ku(312.6) which had relatively less traffic crowd. The similar pattern was observed in the content of zinc; it was higher in Chongro-ku(1305.0) and Chung-ku(1335.4) than in Nowon-ku(489.1) and Kwanak-ku(569.8). In Daejeon, the contents of lead and zinc were decreasing as the distance from Daejeon Railroad Station increased : they were respectively 157.8 and 447.7 within 2km from the station, 157.6 and 235.7 with in 2-4km, and 63.5 and 156.2 within 4-6km and 58.7 and 142.2 within 6-8km. In summary, the contents of lead, copper and zinc were generally higher in the central area of the city, areas of heavy traffic and areas of industry and commerce.