• 대한환경공학회지
• /
• 제35권3호
• /
• pp.226-232
• /
• 2013

역삼투기반 금속산업폐수 물재이용시스템의 전처리공정을 선정하기 위해 연수화, 응집침전, 활성탄, 이온교환 및 중화 침전공정에 대한 무기물 및 유기물 제거특성을 조사하였다. 유기물제거를 위해 DOC중 친수성 및 소수성 유기물을 분류하였으며, 이를 이용하여 조합공정을 최적화하였다. 다양한 전처리공정 중에서 연수화는 금속산업 방류수에 존재하는 칼슘경도(1,201 mg/L as $CaCO_3$)를 93.4%제거함과 동시에 소수성유기물을 모두 제거하는 것으로 나타났다. 연수화 후에 응집침전공정을 연계할 경우, 방류수에 포함된 유기물 5.1 mg DOC/L을 1.6 mg DOC/L까지 저감할 수 있었다. 또한, 금속공정 원폐수를 대상으로 가성소다를 이용한 중화침전공정을 적용하였을 때, 수중경도를 유발하지 않으면서도 철과 총용존성고형물을 효과적으로 제거할 수 있는 것으로 나타났다.

• Membrane and Water Treatment
• /
• 제11권3호
• /
• pp.179-187
• /
• 2020

Electrodialysis has been applied for treatment of industrial wastewater including metal electroplating. The wastewater from metal plating industries contains high concentrations of inorganics such as copper, nickel, and sodium. The ions in the feed were separated due to the electrical forces in the electrodialysis. The concentrate compartment is exposed to the elevated concentrations of the ions and yielded inorganic precipitations on the cation exchange membranes. The presence of organic matter in the metal plating wastewater affects complex interfacial reactions, which determines characteristics of inorganic scale fouling. The wastewater from a metal plating industry in practice was collected and the inorganic and organic compositions of the wastewater were analyzed. The performance of electrodialysis of the raw wastewater was evaluated and the effects of adjusting pH of the raw water were also measured. The integrated processes with neutralization and electrodialysis showed great removal of heavy metals sufficient to discharge to aquatic ecosystem. The organic matter in the raw water was also reduced by the neutralization, which might enhance removal performance and alleviate organic fouling in the integrated system.

• 자원리싸이클링
• /
• 제22권3호
• /
• pp.91-99
• /
• 2013

우리나라 경제의 근간을 이루고 있는 철강산업, 자동차산업이나 전자산업에서 전기도금은 중요한 역할을 담당하고 있다. 전기도금 폐액은 전처리, 도금 및 후처리과정에서 발생하는 폐액이고 다양한 금속염을 포함한 유해한 폐수이다. 현재 일반적인 폐수는 환경법상 배수 규제치 이하로 중화처리한 후 각종 금속이 혼합된 슬러지는 매립하거나 위탁처리하고 있는데, 처리에 따른 막대한 비용이 들뿐만 아니라 매립지 부족과 유가금속 자원 낭비를 초래하고 있다. 따라서 이러한 폐수에서 유가금속을 회수하는 연구가 활발하게 진행되고 있다. 전기도금 폐액에서 금속을 선택적으로 회수하는 새로운 방법은 철산화세균을 이용하는 방법, 황화제를 이용한 황화물(MS) 회수법 및 유기용매를 이용한 용매추출법 등에 관한 연구가 진행되고 있다. 이들의 폐수처리방법을 이용하여 Fe, Cu, Zn, Ni 등의 금속이온이 혼합된 폐수에서 유가금속을 95%이상 회수하는 성과를 거두었다. 이는 전기도금공정에서 배출되는 폐수를 폐기할 것이 아니라 도시광산의 중요한 금속자원으로 활용될 것으로 기대된다.

• 분석과학
• /
• 제12권2호
• /
• pp.141-150
• /
• 1999

영산강 수계 광주천, 황룡강, 지석천, 영산강 상류 유역내에 분포된 9개 업종 76개 배출원의 원폐수 및 방류수로부터 20개 유기화학물질 tetrachloroethylene, toluene, ethylbenzene, p-xylene, m-xylene, isopropyl benzene, stylene, bromobenzene, 1,3,5-trimethylbenzene, 2-chlorotoluene 1,2,4-trimethylbenzene, p-isopropyltoluene, 4-chlorotoluene, n-butylbenzene, 1,2,4-trichlorobenzene, naphthalene, tert-butylbenzene, sec-butylbenzene, phenol, isopropyl benzene hydroperoxide를 액체-액체 추출법으로 분리하여 기체 크로마토그래피/질량 분석계(GC/MS)로 분석하였고, 포준품과 비교함으로써 밝혔다. 특히, 화학업종의 원폐수에는 검출되지 않았으나 방류수에는 폐놀과 이소프로필벤젠 하이드로퍼옥사이드가 검출되었다. 중금속 Cr, Mn, Cu, Zn, Cd, Pb, As, Al, Fe은 모든 업종의 원폐수에 대부분 함유되어 있었으며, 이중 Fe와 Al은 다른 중금속에 비행 원폐수에 다소 많이 검출되었다. Cr, Cd, Pb, As은 전기전자, 금속업종의 원폐수에서 다소 많은 양이 함유되었으며, 이러한 9개 중금속들은 폐수처리과정에서 거의 처리가 되어 방류수에는 환경 기준 이하로 검출되거나 불검출되었다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 1998년도 공동 심포지엄 및 추계학술발표회
• /
• pp.240-244
• /
• 1998

This study was carried out to investigate the efficiency of steel mill slag and sludge in removing heavy metals and cyanide in metal plating wastewater. Laboratory experiments were peformed with jar tester, The tests were peformed at ambient temperature. The results of tests showed that overall rates metals removed were greater than 90 %. Metals were removed from solution as the combined effects of adsorption and precipitation in alkaline condition. The removal efficiency of cyanide by steel mill wastes was above 90 % at optimum conditions. In view of the test results and other engineering characteristics of steel mill slag and sludge, these industrial by-products from steel industry have a high potential to be used in metal plating wastewater treament and were particularly beneficial.

• 한국초전도ㆍ저온공학회논문지
• /
• 제11권4호
• /
• pp.8-11
• /
• 2009

This study introduced wastewater treatment method by High Gradient Magnetic Separation (HGMS). HGMS treatment was high efficient method for various industrial wastewaters. The system is currently research state, but we have surveyed commercialize the technology for industry. In rolling plate process, coolant wastewater was recycled by sedimentation and sand filter system. It needs several large reservoirs and long time to remove suspended solid (SS) like metal fines and iron oxide in hot rolling plate making process. If removing rate of suspended solid in rolling coolant wastewater is improved by using HGMS system, the productivity of working process can be increased and the area of reservoir can be reduced. We manufactured high temperature superconducting HGMS system that had a purpose to treatment of coolant wastewater in rolling plate process. We fabricated the prototypes of magnetic matrix filter consisting of stainless steel 430 mesh, which is a core component in the magnetic separation system, In our basic preliminary experiment using HGMS system, it has been clear that the fine paramagnetic particles in the coolant wastewater obtained from rolling plate process of POSCO can be separated with high efficiency.

• 대한환경공학회지
• /
• 제30권4호
• /
• pp.439-445
• /
• 2008

톱밥은 가장 저렴하면서도 주변에서 가장 흔하게 얻을 수 있는 흡착제중의 하나이며, 이는 사용 후 재생할 필요없이 소각시켜 버리거나 연료물질로 활용할 수 있는 장점이 있다. 이러한 톱밥은 산업폐수중의 색도 혹은 금속 이온성분의 제거를 위한 흡착제로 사용할 수 있다. 본 연구에서는 톱밥의 흡착특성을 알아보기 위하여 염색폐수내의 색도, 유기물질, 부유물질, 탁도 및 금속 이온 성분을 대상으로 그 흡착처리 특성을 확인하여 보았다. 특히, Langmuir, Freundlich, BET 및 Sips 흡착등온식을 활용하여 Fe(III) 이온 물질의 흡착특성을 조사하였으며, 톱밥 입자크기 및 주입량에 따른 영향도 조사하였다. 연속식의 고정상 흡착 실험을 통하여 SS 50.0%, Fe(III) 25.0%, 탁도 79.4%, 색도 48.6% 그리고 COD 50.9%의 제거효율을 획득하였다. 또한, SEM 분석을 통하여 흡착전후의 톱밥표면을 관찰하였다. 결론적으로, 폐톱밥이 산업폐수의 처리를 위한 양호한 흡착제로 활용이 가능함을 확인하였다.

• 한국산업융합학회 논문집
• /
• 제25권2_2호
• /
• pp.199-208
• /
• 2022

The steel wire or steel bar processing process applied to the manufacture of various bolts and power transmission shafts was improved by applying in-line phosphate film treatment technology. By applying a polymer lubricant for a non-reactive metal forming process and a non-reactive non-phosphorus lubricating coating agent, the film formation for each process time was comparatively analyzed and reviewed. Compared to the nine processes applied previously, the in-line phosphate film treatment technology applied with only two processes has been effectively improved in terms of reduction of treatment time, reduction of facility installation area, prevention of water pollution due to wastewater, and non-use of ozone-depleting substances. In addition, it was found that it can have an important effect on productivity improvement and price competitiveness from the simplification of quality control and process control as well as improvement of the working environment.

• 상하수도학회지
• /
• 제13권1호
• /
• pp.134-139
• /
• 1999

This study was conducted to determine the effects of water aggressivity on the corrosion in a recirculating pipe loop systems. As the pH was increased in the range of pH 6.0~8.5, water aggressivity was decreased. Zine and iron concentration of water adjusted by pH were lower than those of tap water and water adjusted by alkalinity and calcium hardness. The major elements of corrosion deposit analyzed by EDS(Energy Dispersion Spectrophotometer) were zinc and calcium. In conclusion, we suggest that in corrosion control practice in the water works industry, increasing the pH of the water can serve as a way of controlling the solubility of metal ions release from water distribution systems.

• 한국의류산업학회지
• /
• 제8권5호
• /
• pp.577-584
• /
• 2006

The binding of heavy metal ions onto cross-linked chitosan in dilute aqueous solution has been investigated as a function of pH (4.0 and 7.0), agitation period (10-180min) and concentration of various metal cations (5, 10, 50 and 100ppm). In order to obtain adsorbents that are insoluble and stable, and prevent the dissolution loss of chitosan into an acidic aqueous solution, chitosan flakes were cross-linked with epichlorohydrine (ECH) and its adsorption behavior was compared with that of the non cross-linked chitosan. An advantage of ECH is that it does not eliminate the cationic amine functional group of chitosan. In terms of adsorption ratio, the chitosan cross-linked at an ECH was inferior to original chitosan and was found that chitosan has a selectivity much remarkable than the cross-linked chitosan in low concentrated metal solutions. However, no significant decreases in the adsorption ratios were observed between the cross-linked ECH-chitosan and the non cross-linked chitosan concerning the adsorption of $Ni^{2+}$, $Co^{2+}$, $Pb^{2+}$ and $Zn^{2+}$ acidic solution.