• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.09a
• /
• pp.235-240
• /
• 2004

This study is to study accumulation of the heavy metals by riparian vegetation throughout analysis of the heavy metal concentration in riparian vegetation, water, and sediment near mine drainage. According to analyzing concentration of the heavy metals in riparian vegetation, water, and sediment, the heavy metal was indicated at the leaf significantly. Compared with the concentration of sediment soil, the maximum concentration of the As, Cd, CN, Pb, Zn was higher 2.6, 2.6, 2.5, non-detect, and 1.5 times in leaf, Also those concentration have 9.6, 16.6, 2.5, 1.6, and 2.5 times in root. As the results, the author can know the sediment has a very relative to vegetation in mine drainage, because the increasing of concentration of heavy metal in sediment gives the more accumulative concentration of heavy metal in vegetation. Compared with the concentration of contaminated site and non-contaminated site. As, Cd, CN, Pb, Zn the maximum concentration in sediment soil was higher 5.7, 258.1, 10.9, 370.0, and 298.3 times respectively. In case of vegetation, the maximum concentration of the As, Cd, CN, Pb, Zn was higher 5.6, 62.3, 5.0, non-detect, and 30.6 times in leaf. Also those concentration have 8.5, 63.3, 2.6, 60.7, and 62.1 times in root. In this study, the author can surmise that there indicated a lot of adsorption with the heavy metal concentration in contaminated mine drainage.

• Journal of Environmental Science International
• /
• v.6 no.5
• /
• pp.451-459
• /
• 1997

This paper alms to describe the indoor-outdoor air quality in school environment through the analyses of heavy metal concentration by inductively Coupled Plasma(ICPI, which were observed at some school environment, such as traffic area, industrial area seme-industrial area, and residence area. The results are as follows : (1) Regardless Indoor and outdoor, the area with the highest concentration of heavy metal is industrial area followed by traffic area, residence area and semi-industrial area in descending order of magnitude. And the heavy metal concentration of indoor is higher than that of outdoor. (2) The main heavy metal components with more high level concentration of Indoor than those of outdoor are Zn, Al, Ca and these heavy metal concentrations are higher in class than In corridor and outdoor.

• Journal of Environmental Impact Assessment
• /
• v.18 no.4
• /
• pp.209-218
• /
• 2009

The purpose of this study was to accumulation of the heavy metals by riparian vegetation throughout analysis of the heavy metal concentration in riparian vegetation, water, and sediment near mine drainage. According to analyzing concentration of the heavy metals in riparian vegetation, water, and sediment the heavy metal was indicated at the leaf significantly. Compared with the concentration of sediment soil, the maximum concentration of the As, Cd, CN, Pb, Zn was higher 2.6, 2.6, 25, non-detect, and 15 times in leaf. Also those concentration have 9.6, 16.6, 25, 1.6, and 25 times in root. As the results, the author can know the sediment has a very relative to vegetation in mine drainage. because, the increasing of concentration of heavy metal in sediment gives the more accumulative concentration of heavy metal in vegetation. Compared with the concentration of conta minated site and non-contaminated site. As, Cd, CN, Pb, Zn the maximum concentration in sediment soil was higher 5.7, 258.1, 10.9, 370.0, and 298.3 times respectively. In case of vegetation, the maximum concentration of the As, Cd, CN, Pb, Zn was higher 5.6, 62.3, 5.0, non-detect, and 30.6 times in leaf. Also those concentration have 8.5, 63.3, 2.6, 60.7, and 62.1 times in root. In this study, the author can surmise that there indicated a lot of adsorption with the heavy metal concentration in contaminated mine drainage.

• Journal of Magnetics
• /
• v.11 no.2
• /
• pp.98-102
• /
• 2006

It was examined in this study that magnetic beads, which are assumed to be environmentally functional, could be effective in processing heavy metals that are water pollutants. For the purpose, magnetic beads containing carboxyl groups, which has strong binding force with heavy metals, are mixed with each Cd, Pb, Ni, Cu and Cr(III) solution, then stirred in pH 6. As a results of the process, it was proven that heavy metals bind quickly with magnetic beads through the reaction. In order to analyze heavy metal concentration, magnetic beads bind with heavy metal were collected by external magnetic force and dissolved in acid. The graphite furnace AAS was used to get heavy metal concentration melted in the acid solution. The results showed that heavy metal extractions by magnetic beads were influenced by the type and the concentration of a heavy metal, and over 90% of a heavy metal can be extracted in ppm level save for Cr(III). It was also examined in the study whether heavy metal extraction is influenced when other ions exist in each heavy metal solution. According to experiment, adding other heavy metals to a solution did have little influence on extracting an intended heavy metal. But in case salt or heavy metal chelate was added, Ni extraction changed sensitively although extracting other heavy metals were influenced only when the concentration of an added substance is high. In conclusion, it was shown that magnetic beads could be used to treat wastewater with relatively high heavy metal concentration.

• Fashion & Textile Research Journal
• /
• v.5 no.3
• /
• pp.283-288
• /
• 2003

Large quantity of metal mordant in natural dyeing has been used. For environmental reason, there is a need to reduce the amount of metal mordant and suggest the optimum amount of metal mordant in dyeing process. In this study, the relationship between mordant concentration and dyeing property was investigated. Various metal mordant concentrations of AI, Cu, Fe, Sn, were studied (from 1 to 5%). After treatment of mordant on cotton fabric, the concentration of metal ion in used mordant solution was quantified. There was no significant difference of the tone of color in mordant concentration from 1% to 5%, Therefore, there is no need to increase mordant concentration over 1%. chitosan treated cotton fabric showed a significant increase in dyeing affinity compared to untreated cotton fabric (the value of ${\Delta}E$ was 20). chitosan increased dye affinity significantly in the presence of mordant. It can be suggested that chitosan itself can replace metal mordants in the future.

• Journal of environmental and Sanitary engineering
• /
• v.14 no.3
• /
• pp.71-79
• /
• 1999

The Hg, Cd, Cu, Mn, and Zn in bottom sediments of han river and their tributaries were analyzed to evaluate the seasonal variations of heavy metals. Leaching tests were also performed for estimation of availability of heavy metal retention in sediments. Sediments of Anyang stream showed the highest concentration of heavy metal in the sediment samples. Heavy metal concentration was heavily depended upon the heavy metal source of tributaries of han river and particle distribution. Clay and silt had higher concentration of heavy metals than very fine san and fine sand due to difference of retention capability of heavy metal. The highest concentration of heavy metal was observed in bottom sediments irrespective of sites investigated. Heavy metals and ignition loss showed positive relations, and higher relationships with p-value <0.01 were observed between copper and lead. copper and zinc, and depended on the pH condition of leaching test, and leachated fraction increased with decrease of the pH.

• Journal of the Korean Society of Safety
• /
• v.19 no.1
• /
• pp.77-80
• /
• 2004

The purpose of this study was to examine effects of combustion retardation for paper filter impregnated metal salts by measurement of extinguishing concentration, CO concentration, and limiting oxygen index(LOI, ASTM D 2863). And thermal stability analysis using DSC was carried out. In case of extinguishing concentration, $NH_4H_2PO_4$ showed excellent effect of combustion retardation. The result of LOI measurement showed that metal salts possessed good effect of combustion retardation. And thermal analysis using DSC showed that these metal salts possessed thermal stability. In case of CO concentration, CO concentration was increasing because of imperfect combustion process due to combustion retardation effect of metal salts.

• Journal of Environmental Science International
• /
• v.16 no.12
• /
• pp.1451-1462
• /
• 2007

Heavy metal concentrations in the soil were investigated for the abandoned Samkwang metal mine, Cheongyang-Gun, Chungnam Province, Korea. The concentrations of heavy metal(As, Cd, Cu, Ni, Pb, Zn) were determined in mine soils collected at the abandoned mine sites to obtain a general classification and specification of the pollution in this highly polluted region. The results estimated with the normal test and basis statistic on the central tendency and variation showed that the distribution of heavy metal concentration had significantly different at the range of all locations. The range of spatial distribution on the relationship of heavy metal concentration and pH was $4.8{\sim}8.8$ and heavy metal concentration on the type of land use was highest in forest land, and also Ni and Zn in farm and rice field showed the high concentration. The distribution of heavy metal concentration on the depth of a soil showed that the metal concentrations in subsoil were higher than of those in surface soil, while the concentration of Cu and Ni had no significant difference on the depth of soil. Results from the correlation analysis using the data except the extreme and unusual data revel that Zn-Cd(r=0.867), Zn-As(r=0.797), Zn-Pb(r=0.764), Cu-Cd(r=0.673), Cu-As(r=0.614) and Zn-Ni(r=0.605) were the most important parameters in assessing variations of heavy metal in soil. To discriminate pattern differences and similarities among samples, principal factor analysis(PFA) and cluster analysis(CF) were performed using a correlation matrix. This study suggests that PFA and CF techniques are useful tools for identification of important heavy metal and parameters. This study presents the necessity and usefulness of multivariate statistical assessment of complex databases in order to get better information about the quality of soil and gives the basis information to clean up the abandoned mine sites.

• The Journal of Korean Medicine
• /
• v.24 no.2
• /
• pp.59-65
• /
• 2003

This study was conducted to analyze metal concentration changes following processing steps for crude, remnant after boiling, and decoction of Korea herbal drugs. We measured meta.! concentration from 20 random patients who visited Oriental medical clinics for treatment of several diseases through normal action. The results obtained were as below: First, in the study to acknowledge quality control between Korean Lab and Harvard Lab in the US, 20 equal herbal samples resulted in the same values, so we confirmed the precision of measurement results from both labs. Second, hazardous metal mean concentration in crude, remnant after boiling, and decoction of herbal drugs were $32.5{\mu\textrm{g}}/22.1{\mu\textrm{g}}/8.8{\mu\textrm{g}}$ for As, $0.0{\mu\textrm{g}}/0.0{\mu\textrm{g}}/0.0{\mu\textrm{g}}$ for Cd, $1.0{\mu\textrm{g}}/0.0{\mu\textrm{g}}/0.0{\mu\textrm{g}}$ for Hg and $5416.3{\mu\textrm{g}}/3639.6{\mu\textrm{g}}/1002.6{\mu\textrm{g}}$ for Pb, respectively. These metal concentrations decreased 72.9-100.0% compared to crude status. The same trend was also visible in the other essential elements. From reviewing these results, we could carefully conclude that decoction had the least amount of metal concentration and is the optimal way to intake herbal drugs.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.5
• /
• pp.589-597
• /
• 2016

There are a number of industrial complexes which could be a source of heavy metal (loid)s contamination of arable soil in Gyeongnam province of South Korea. Heavy metal (loid)s accumulation of plant is more related to the concentration of plant available heavy metal (loid)s in arable soil than that of total heavy metal (loid)s. The objectives of this study were 1) to examine heavy metal concentrations in soils located near industrial complexes in Gyeongnam province and 2) to determine the relationship between concentration of plant available heavy metal (loid)s and chemical properties of soil. Soil samples were collected from 85 sites of arable lands nearby 7 industrial complexes in Gyeongnam province. Total heavy metal (loid)s concentration, available heavy metal (loid)s concentration, and chemical properties of collected soils were measured. The mean concentrations of arsenic (As), cadmium (Cd), copper (Cu), lead (Pb), and zinc (Zn) in the soils were $5.8mg\;kg^{-1}$, $1.3mg\;kg^{-1}$, $0.03mg\;kg^{-1}$, $51.5mg\;kg^{-1}$, and $68.7mg\;kg^{-1}$, respectively. Total concentration of Cd and Zn in arable soil located near ${\nabla}{\nabla}$ industrial complex exceeded the warning criteria ($4mg\;kg^{-1}$ and $300mg\;kg^{-1}$ for Cd and Zn, respectively) as described by in the soil environmental conservation Act of Korea. The concentration of plant available heavy metal (loid)s was negatively related to the soil pH and available Pb and Zn concentrations had relatively high correlation coefficient when compared with other heavy metal (loid)s. The concentration of plant available Pb and Zn was negatively related to that of organic matter (OM). Based on the above results, it might be a good soil management to control pH and OM concentration with soil amendments such as lime and compost to reduce phytoavailability of heavy metal (loid)s in arable soil located near industrial complex.