• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.6 no.4
• /
• pp.3-38
• /
• 1996

The mobile station shall convolutionally encode the data transmitted on the reverse traffic channel and the access channel prior to interleaving. Code symbols output from the convolutional encoder are repeated before being interleaved except the 9600 bps data rate. All the symbols are then interleaved, 64-ary orthogonal modulation, direct-sequence spreading, quadrature spreading, baseband filtering and QPSK transmission. The sync, paging, and forward traffic channel except the pilot channel in the forward CDMA channel are convolutionally encoded, block interleaved, spread with Walsh function at a fixed chip rate of 1.2288 Mcps to provide orthogonal channelization among all code channels. Following the spreading operation, the I and Q impulses are applied to respective baseband filters. After that, these impulses shall be transmitted by QPSK. Authentication in the CDMA system is the process for confirming the identity of the mobile station by exchanging information between a mobile station and the base station. The authentication scheme is to generate a 18-bit hash code from the 152-bit message length appended with 24-bit or 40-bit padding. Several techniques are proposed for the authentication data computation in this paper. To protect sensitive subscriber information, it shall be required enciphering ceratin fields of selected traffic channel signaling messages. The message encryption can be accomplished in two ways, i.e., external encryption and internal encryption.

• Journal of Platform Technology
• /
• v.10 no.2
• /
• pp.3-9
• /
• 2022

In this paper, to maximize the performance of the scatter communication in multi-core and many-core processors, a technique that considers the communication situation of the processing node is applied to a multi-core processor composed of 32 processing nodes. Since the existing scatter algorithm cannot recognize the communication conditions of the processing nodes, communication is generally performed according to an initially set transmission order. In this case, scatter communication starts only after the communication currently being performed by all processing nodes inside the processor is finished. The scatter communication performance was improved by this technique, and it was confirmed that there was a performance improvement of up to 78.93% compared to the existing algorithm through BFM simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.11B
• /
• pp.956-966
• /
• 2004

Nowadays, NGN(Next Generation Network) is evolving into network with packet based QoS.\ulcorner This paper presents the recovery method as a selecting way of more efficient path in MPLS network that reduces the service interruption time. In order to increase the efficiency of usage of recovering resource which is one of major functions of disorder recovering, it opens the state information of each Node both to fault detector and bandwidth broker so that it reduces message transmission time for recovery when functional disorder occurs. in addition, by effective management and adjustment of required bandwidth of entire network depending on the changes of traffic load, it improves the efficiency of bandwidth usage. and in MPLS network supporting priority selection function, it allocates domains depending on the traffic relating to priority order to the entire network so that\ulcorner it efficiently allocates proper resources to the restoring process between the entry and the end for the traffic of high priority and for low priority traffic, it restores path oかy inside disordered domain. by doing this, it reduces resetting time and unnecessary massage transmission.

• Journal of Korea Society of Industrial Information Systems
• /
• v.25 no.1
• /
• pp.1-11
• /
• 2020

Wireless sensor networks consist of a large number of tiny sensor nodes which have limited battery life. In order to maximize the network life span, we propose an optimal transmission radius, R, for control messages. We analyze the transmission radius as a function of the energy consumption of cluster head nodes and the energy consumption of member nodes to find the optimal value of R. In simulations we apply our proposed optimization of transmission range to LEACH-based single-hop and multi-hop networks to show that our proposed scheme outperforms other existing routing algorithms in terms of network life span.

• Journal of Sensor Science and Technology
• /
• v.14 no.3
• /
• pp.198-205
• /
• 2005

Recently, the systems using multiple sensors such as magnetic, acoustic and pressure sensor are used for detection of underwater objects or vehicles. Those systems have difficulty of maintenance and repair because they operate underwater. Thus, this paper describes a hybrid detection system with long term operating reliability. This has a multi-signal transmission structure to have a high reliability. First, a signal transmission & receiving part, which transfers data from underwater sensors to land and receive control message from land through optical cable, has 4 multi-path. Second, the nodes for signal transmission are connected dually each other with single-hop construction and sensors are connected to a couple of neighboring nodes. This enables the output signal to transmit from a node to the next node and the next but one node together. Also, the signal from a sensor can be transmitted to two nodes at the same time. Therefore, the system with this construction has high reliability in long term operation because it makes possible to transmit sensor data to another node which works normally although a transmission node or cable in system have some faults.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.8
• /
• pp.3904-3917
• /
• 2017

IP multimedia subsystem (IMS) is an open standardized architecture for delivering multimedia service over IP network in a route-agnostic manner. With the increasing popularity of conversational class service, the delivery of a traffic flow with a certain bandwidth demand over a single network path is either not possible or not cost-effective. Multipath transmission is considered to be a promising solution to provide high-quality delivery service. This paper proposes a software defined service overlay network (SDSON) based multipath transmission framework for IMS, which is complementary to existing network architecture. The framework transforms original two-party session negotiation into three-party session negotiation that supports participants to negotiate multipath transmission capacity and path information by signaling message. Based on existing IETF standards, SIP and SDP are scalable to support these functions. Finally, the proposed framework is fully implemented on open source platform and examined by experiments. Experimental results show that multipath-enabled IMS is an effective way to improve the delivery performance of conversational class service.

• Journal of information and communication convergence engineering
• /
• v.9 no.6
• /
• pp.625-628
• /
• 2011

Dynamic sensor network(DSN) technology which is based on swarming flight type air node offers analyzed and acquired information on target data gathered by air nodes in rotation flight or 3 dimension array flight. Efficient operation of dynamic sensor network based on air node is possible when problems of processing time, data transmission reliability, power consumption and intermittent connectivity are solved. Delay tolerant network (DTN) can be a desirable alternative to solve those problems. DTN using store-and-forward message switching technology is a solution to intermittent network connectivity, long and variable delay time, asymmetric data rates, and high error rates. However, all processes are performed at the bundle layer, so high power consumption, long processing time, and repeated reliability technique occur. DSN based on swarming flight type air node need to adopt store-and-forward message switching technique of DTN, the cancelation scheme of repeated reliability technique, fast processing time with simplified layer composition.

• ETRI Journal
• /
• v.35 no.1
• /
• pp.35-40
• /
• 2013

Asynchronous ranging is one practical method to implement a locating system that provides accurate results. However, a locating system utilizing asynchronous ranging generates a large number of messages that cause transmission delays or failures and degrades the system performance. This paper proposes a novel approach for efficient congestion control in an asynchronous range-based locating system. The proposed method significantly reduces the number of messages generated during the reader discovery phase by eavesdropping on other transmissions and improves the efficiency of ranging by organizing the tags in a hierarchical fashion in the measurement phase. Our evaluation shows that the proposed method reduces the number of messages by 70% compared to the conventional method and significantly improves the success rate of ranging.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.50 no.5
• /
• pp.218-225
• /
• 2001

This paper analyses the performance of network system using the CAN(Controller Area Network) protocol. Given messages are assumed to be scheduled by the DMS(Deadline Monotonic Scheduling) algorithm. The mathematical models for time-delay that can be occurred between CAN nodes are defined. The effectiveness of modeling is shown by comparing the difference of time-delay between simulations and practical experiments. We analyse the results according to the variation of factors, such as the number of nodes, the transmission speed, the message size and the number of aperiodic messages through simulation and confirm the real-time performance of lower priority messages. We also investigate the real-time performance of periodic messages when aperiodic message generates.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.3
• /
• pp.501-506
• /
• 2008

Medical environments incorporate complex and integrated data networks to transfer vast amounts of patient information, such as images, waveforms, and other digital data. To assure interoperability of images, waveforms and patient data, health level seven(HL7) was developed as an international standard to facilitate the communication and storage of medical data. We also adopted medical waveform description format encoding rule(MFER) standard for encoding waveform biosignal such as ECG, EEG and so on. And, the study converted a broad domain of clinical data on patients, including MFER, into a HL7 message, and saved them in a clinical database in hospital. According to results obtained in the test environment, it was possible to acquire the same HL7 message and biosignal data as ones acquired during transmission. Through this study, we might conclude that the proposed system can be a promising model for electronic medical record system in u-healthcare environment.