• 한국세라믹학회지
• /
• 제44권7호
• /
• pp.358-361
• /
• 2007

Well-ordered mesoporous SiCBN ceramics have been successfully synthesized by infiltrating a polymeric precursor, which was prepared from borazine and 2,4,6-trimethyl-2,4,6-trivinylcyclotrisilazane via a hydroboration reaction, into a mesoporous carbon (CMK-3) as a hard template. This was followed by pyrolysis at $1400^{\circ}C$ under nitrogen gas and subsequent oxidative removal of the carbon template without chemical etching. The prepared mesoporous SiCBN ceramic was characterized by a small-angle XRD, TEM, and BET surface area. The resulting mesoporous SiCBN ceramic revealed a BET surface area of $275 m^2g^{-1}$ and a pore volume of $0.8 cm^3 g$ with no crystallization.

• 한국전기전자재료학회논문지
• /
• 제25권8호
• /
• pp.657-663
• /
• 2012

The spherical mesoporous silica is synthesized and incorporated with CdSe/ZnS quantum dots(QDs) for preparing micro beads to detect toxic and bio-materials with high sensitivity. The spherical silica beads with the brunauer-emmett-telle(BET) average pore size of 15 nm were prepared with a ratio 1, 3, 5-trimethylbenzen, as a swelling agent, to the block-copolymer template surfactant of over 1 and under vigorous mixing condition. The surface of spherical mesoporous silica is modified using octadecylsilane for incorporating QDs. Based on photoluminescence(PL) spectra, the relative brightness of mesoporous silica beads incorporated with 10 nM of QDs is 79,000 times brighter than that of Rodamine 6 G.

• 한국세라믹학회지
• /
• 제51권6호
• /
• pp.544-548
• /
• 2014

Aluminum nitride was synthesized using a carbothermal method from mesoporous alumina having a high surface area (> $1,000m^2/g$) as an aluminum source and CNTs (carbon nano tubes) as a carbon source. In this case the mesoporous alumina was used as the starting material instead of ${\alpha}-Al_2O_3$ with the expectation that the mesopores in mesoporous alumina act as channels for N2 gas and elimination of CO generated as by-product. It is also expected that the synthetic temperature should be lower compared to the use of ${\alpha}-Al_2O_3$ as a starting material due to its high surface area. The crystallinity of the produced aluminum nitride was studied by XRD and FT-IR, and the microstructure was investigated by FE-SEM. Also the purity of the aluminum nitride was analyzed through N/O determinator and ICP analysis.

• 한국세라믹학회지
• /
• 제41권7호
• /
• pp.528-533
• /
• 2004

입자크기가 20∼700nm인 구형 실리카입자의 자연침강 혹은 원심분리법으로 제조한 주형체에 탄화규소 전구체 polymethyl-silane (PMS) 혹은 polycarbosilane (PCS) 고분자 용액을 함침한다음, 가교 및 1000∼140$0^{\circ}C$ 열분해하고 마지막으로 불산 (HF)으로 실리카를 식각하여 84∼658nm 기공이 3차원으로 정렬된 메크로다공성(macroporous) 탄화규소 세라믹과 불규칙적인 15∼65nm 기공을 가진 메조다공성(mesoporous) 탄화규소 세라믹을 제조하였다. 전자는 112nm 실리카 입자 주형체를 사용하여 140$0^{\circ}C$로 처리했을 때, 표면적 584.64$m^2$g$^{-1}$을 나타낸 반면, 후자는 20-30nm 실리카 주형체를 사용하여 100$0^{\circ}C$로 처리하였을때, 최대의 표면적 619.4$m^2$g$^{-1}$를 나타내었다, 이와 같이 사용된 실리카 입자, 고분자 전구체, 그리고 열처리 조건에 따른 기공특성을 SEM. TEM 및 BET으로 분석 설명하였다.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2004년도 춘계총회 및 연구발표회 초록집
• /
• pp.48.1-48.1
• /
• 2004

• 한국세라믹학회지
• /
• 제47권1호
• /
• pp.66-70
• /
• 2010

This article presents a brief review of our recent studies on flowerlike nanostructured $CeO_2$ materials. These materials are monodispersed microspheres with peony appearance, open mesoporous structure, large specific surface area and nano-crystalline feature. The applications of this type of novel material to SOFC, ethanol steam reforming and CO oxidation are introduced.

• Bulletin of the Korean Chemical Society
• /
• 제18권9호
• /
• pp.1028-1031
• /
• 1997

Electrostatic interaction is a very important parameter for the membrane selectivity. In this work, the electrical double layer establishment on the surface of metal oxide material from the Stern-Grahame model has been described. Then, some examples of rejection using micro and mesoporous ceramic membranes have been given. A correlation between the charges of the membrane material and the species to be filtered has been precised. Two rejection mechanisms have to be taken into account the size of the solutes and the electrostatic interactions.

• 한국전기전자재료학회논문지
• /
• 제25권8호
• /
• pp.593-601
• /
• 2012

Ordered mesoporous oxide films have been focused because of their low density, high interior specific surface area, and high thermal insulation. Specially, the ordered mesoporous oxide films prepared by self-assembly has many advantages due to easy process and high reproducibility. In this work, ordered mesoporous $SiO_2$, $Al_2O_3$, and $TiO_2$ films were synthesized by control of composition and processing parameter. Also, their structural, thermal, and mechanical properties were characterized variously. In conclusion, ordered mesoporous oxides will be one of core materials in new technology due to their excellent and unique properties.

• 한국세라믹학회지
• /
• 제45권10호
• /
• pp.631-637
• /
• 2008

Self-standing mesoporous bioactive glass/poly($\varepsilon$-caprolactone) composite thin films with good molding capability, bioactivity, and biocompatibility in vitro, which may find potential applications in tissue engineering and drug storage, were prepared using a combination of the sol-gel, polymer templating, and water casting method. The thickness of self-standing films was affected by the difference of dielectric constant between distilled water and organic solvent.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.296-296
• /
• 2006

Highly temperature stable mesoporous materials have excellent properties and potential applications. Here we show a novel poly(vinyl)silazane-block-polystyrene diblock copolymer, which was synthesized by controlled/living free radical polymerization with reversible addition fragmentation chain transfer (RAFT) route. The obtained diblock copolymer occurs the phaseseparation on the nanoscale to form ordered nanostructure, which is converted to mesoprorous ceramic after heating at 800oC. This route demonstrates the preparation of highly temperature stable mesoporous silicon carbon nitrides (SiCN) ceramic film directed from highly cross-linking poly(vinyl)silazane blocks with high ceramic yield, which is different from previous pathway.