• 한국응용과학기술학회지
• /
• 제21권4호
• /
• pp.345-351
• /
• 2004

Highly ordered pure-silica MCM-41 materials possessing well-defined morphology have been successfully prepared with surfactant used as a template. The fabrication of mesoporous silica has received considerable attention due to the need to develop more efficient materials' for catalysis, separations, and chemical sensing. The surface modified MCM-41 was used as anadsorbent for biomolecules. Silica-supported organic groups and DNA adsorption on surface modified MCM-41 were investigated by FT-IR and UV-Vis spectrometer, respectively. The use of MCM-41 as the modification of electrode surfaces were investigated electrochemical properties of metal mediators with biomolecules. The modified ITO electrodes increased peak currents for a redox process of $[Ru(bpy)_3]^{2+}$ relative to the bare electrode. The electrochemical detection of DNA by cyclic voltammetry when the current is saturated in the presence of the mediator appeared more sensitive due to a higher catalytic current on the MCM-41 supported electrodes modified by carboxylic acid functional groups. The carboxyl or amine groups on the surface of MCM-41 interact and react with the $-NH_2$ groups of guanine and backbone, respectively. Highly ordered mesoporous materials with organic groups could find applications as DNA sensors.

• 자원리싸이클링
• /
• 제19권1호
• /
• pp.40-48
• /
• 2010

생활 폐기물 소각재 슬래그를 출발원료로한 메조포러스 실리카의 합성에 미치는 NaOH 영향에 대해 조사하였다. 기계적 분쇄를 통해 활성화된 소각재 슬래그에 대한 추출 공정은 농도가 다른 NaOH 용액을 이용한 알칼리 처리로 수행하였다. 분쇄시간 그리고 NaOH 용액 농도가 증가 할수록 소각재 슬래그로부터 추출되는 Si 추출량은 증가하였다. 합성된 메조포러스 실리카의 물리적 특성(기공크기, 비표면적 그리고 총 기공부피)은 BET, SEM, TEM 그리고 small-angle XRD 분석을 통하여 평가하였다. 합성된 메조포러스 실리카는 대략 7 nm 기공크기의 hexagonal 구조를 가진 SBA-15로 판명되었다. NaOH 용액 농도가 증가됨에 따라 합성된 메조포러스 실리카는 비표면적 및 기공 부피도 증가하였다. 반면, 거의 동일한 Si 이온 농도로 제조된 메조포러스 실리카의 경우, 3M NaOH로 제조된 샘플에 비해 4M NaOH로 제조된 샘플의 비표면적 및 기공 부피가 감소하였다. 이는 과량의 Na 이온이 mesophase 형성을 방해하여 미반응되어 남아있는 Si 이온이 합성되어진 mesophase의 벽 두께를 증가시키는 것으로 확인되었다.

• Environmental Engineering Research
• /
• 제20권4호
• /
• pp.342-346
• /
• 2015

Haloacetonitriles (HANs) are nitrogenous disinfection by-products (DBPs) that have been reported to have a higher toxicity than the other groups of DBPs. The adsorption process is mostly used to remove HANs in aqueous solutions. Functionalized composite materials tend to be effective adsorbents due to their hydrophobicity and specific adsorptive mechanism. In this study, the removal of dichloroacetonitrile (DCAN) from tap water by adsorption on thiol-functionalized mesoporous composites made from natural rubber (NR) and hexagonal mesoporous silica (HMS-SH) was investigated. Fourier-transform infrared spectroscopy (FTIR) results revealed that the thiol group of NR/HMS was covered with NR molecules. X-ray diffraction (XRD) analysis indicated an expansion of the hexagonal unit cell. Adsorption kinetic and isotherm models were used to determine the adsorption mechanisms and the experiments revealed that NR/HMS-SH had a higher DCAN adsorption capacity than powered activated carbon (PAC). NR/HMS-SH adsorption reached equilibrium after 12 hours and its adsorption kinetics fit well with a pseudo-second-order model. A linear model was found to fit well with the DCAN adsorption isotherm at a low concentration level.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제37회 하계학술대회 초록집
• /
• pp.69-69
• /
• 2009

• 센서학회지
• /
• 제16권6호
• /
• pp.395-400
• /
• 2007

Ambient drying sol-gel processing was used for monolithic silica ambigels in the temperature range of $130-250^{\circ}C$. A new method of mesopore ambigels, which mean the aerogels prepared by ambient pressure drying process synthesis, is suggested at first. This method includes two important approaches. The first point is that $SiO_{2}$ surface modification of wet gel was performed by trimethylchlorosilane in n-butanol solution. This procedure is provided the silica gel mesopore structure formation. The second point is a creation of the ternary azeotropic mixture water/n-butanol/octane as porous liquid, which is effectively provided removing of water such a low temperature by 2 step drying condition under ambient pressure. The silica aerogels, which were prepared by ambient pressure drying from azeotropic mixture of water/n-butanol/octane, are transparent, crack-free and mesoporous (pore size ${\sim}$ 5.6 nm) with surface area of ${\sim}$ $923{\;}m^2/g$, bulk density of $0.4{\;}g/cm^3$ and porosity of 85 %.

• Bulletin of the Korean Chemical Society
• /
• 제33권12호
• /
• pp.4015-4022
• /
• 2012

Manganese(III) 5-(4-carboxyphenyl)-10,15,20-triphenyl porphyrin chloride (Mn(TCPP)Cl) was grafted through amide bond on silica zeolite Y (HY), zeolite beta ($H{\beta}$) and hexagonal mesoporous silica (HMS). XRD, ICP-AES, $N_2$ physisorption, SEM, TEM, FTIR and thermal analysis were employed to analyse these novel heterogeneous materials. These silica supported catalysts were shown to be used for epoxidation and good shape selectivity was observed. The effect of support structure on catalytic performance was also discussed. The catalytic activity remained when the catalysts were recycled five times. The energy changes about epoxidation of alkenes by $NaIO_4$ and $H_2O_2$ were also computationally calculated to explain the different catalytic efficiency.

• 대한화장품학회지
• /
• 제30권3호
• /
• pp.321-328
• /
• 2004

주형합성법을 이용하여 메조기공(mesoporous pore)을 지닌 나노실리카 물질들과 나노카본볼의 대량생산법이 개발되었다. 암모니아, 트리메틸아민, 아세트알데히드 그리고 메틸메르캅탄과 같은 악취 물질들이 마크로기공 코어-메조기공 쉘(macro-porous core/mesoporous shell) 구조체인 나노카본볼에 흡착되는 현상이 상업용 탈취제인 활성탄과 비교 조사되었다. 나노카본볼에서의 악취의 흡착 및 분해는 활성탄에 비해 우수하게 관측되었고 촉매가 나노카본볼 내부에 첨착되면 더욱 악취 분해 특성이 증가되었다. 나노카본볼의 우수한 흡착 및 분해 특성을 이해하기 위해 물리화학적 특성인 균일한 기공, 넓은 표면적, 큰 기공 부피에 관한 기공 특성과 악취의 분해 현상이 연구되었다. 이러한 나노카본볼은 탈취제 분야에서 많은 응용성이 있을 것으로 전망된다.

• 전기화학회지
• /
• 제14권3호
• /
• pp.184-190
• /
• 2011

다공성 중공형태의 $LiMn_2O_4$는 실리카 템플레이트과 침전법에 의해 합성되었다. 합성한 $LiMn_2O_4$는 나노사이즈의 1차입자를 가지며 다공성 중공형태를 가지고 있었다. 실리카 템플레이트의 제거는 NaOH를 이용하여 화학적 에칭법이 사용되었다. NaOH의 농도를 높여줌에 따라 망간산화물 입자 크기가 증가 하며 다공성의 중공구가 형성되었다. X-선 회절 분석을 통하여 합성된 $LiMn_2O_4$는 Fd3m의 공간 그룹을 가지는 스피넬 구조가 형성된 것을 확인 할 수 있었다. 실리카와 망간염의 비율을 높여주었을 경우 합성된 $LiMn_2O_4$는 1차입자의 크기는 감소한다. 실리카와 망간염의 비율이 1 : 9 이상인 경우에서 마이크론 단위의 정방정계의 $LiMn_2O_4$가 합성되었다. 다공성 중공형태의 $LiMn_2O_4$의 전기화학적 특성을 평가하기 위하여 2032형태의 코인셀을 제작하여 충/방전 테스트를 하였다. 나노사이즈의 1차입자를 가진 시료의 경우에는 마이크론 사이즈의 1차입자를 가진 시료보다 용량은 낮았지만 용량유지율은 향상되는 것 확인 할 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제33권11호
• /
• pp.3711-3718
• /
• 2012

Here, we report a chain-length dependent morphology and pore structure tailing of mesoporous silica templated from organogels, which is formed by primary alkylamine and ethylene glycol at room temperature. As the chain length of alkylamine changes from 12 to 18, the resulted materials exhibit a morphology change from layers to spheres and platelets, respectively. SEM and TEM observation revealed that these shapes appear to be inherited from their parent organogels. Further pore structure characterization by nitrogen sorption analysis demonstrates that all the resulted silicas exhibit typical IV isotherms indicative of uniform mesopores, and their pore sizes are dependent on the chain length of alkylamine used.

• Transactions on Electrical and Electronic Materials
• /
• 제12권3호
• /
• pp.119-122
• /
• 2011

A series of mesoporous silicalites was synthesized using different compositions of tetraethylorthosilicate and methyltriethoxysilane (MTES) as the silica source. Cetyltrimethylammonium bromide was used as the organic template. Their detailed pore structures were investigated by transmission electron microscopy, X-ray diffraction, and N2 adsorption method. The thermal properties of these silicalites were studied by thermogravimetric analysis. The increased amount of MTES destroyed mesoporous channels and reduced pore sizes from 3.4 nm to 2.8 nm in calcined silicalites. The calcined silicalite transformed completely into an amorphous state at 30% MTES loading. Methyl pending groups of MTES hindered the structural ordering of ≡Si-O- frameworks, resulting in an amorphous structure. This was caused by the insufficient formation of supramolecular assembly with the organic template. No capillary condensation step was found in MS 7/3 silicalite. The other capillary condensation steps shifted toward the lower relative pressure with increasing MTES content, indicating the reduction of pore sizes.