• Korean Journal of Computational Design and Engineering
• /
• v.6 no.3
• /
• pp.184-192
• /
• 2001

In this paper we present a remeshing algorithm for irregular meshes with boundaries. The irregular meshes are approximated by regular meshes where the topological regularity is essential for the multiresolutional analysis of the given meshes. Normal meshes are utilized to reduce the necessary data size at each resolution level of the regularized meshes. The normal mesh uses one scalar value, i.e., normal offset value which is based on the regular rule of a uniform subdivision, while other remeshing schemes use one 3D vector at each vertex. Since the normal offset cannot be properly used for the boundaries of meshes, we use a combined subdivision scheme which resolves a problem of the proposed normal offset method at the boundaries. Finally, we show an example to see the effectiveness of the proposed scheme to reduce the data size of a mesh model.

• Structural Engineering and Mechanics
• /
• v.50 no.6
• /
• pp.817-834
• /
• 2014

An experimental program was designed in the current work to examine the structural behavior of ferrocement beams reinforced with composite materials under three point loadings up to failure. The experimental program comprised casting and testing of twelve ferrocement beams having the dimensions of 120 mm width, 200 mm depth and 1600 mm length. The twelve beams were different in the type of reinforcements; steel bars, traditional wire meshes (welded and expanded wire meshes) and composite materials (fiberglass wire meshes and polypropylene wire meshes). The flexural performances of the all tested beams in terms of strength, ductility, cracking behavior and energy absorption were investigated. Also all the tested beams were simulated using ANSYS program. The results of the experimental tests concluded that the beam with fiber glass meshes gives the lowest first crack load and ultimate load. The ferrocement beam reinforced with four layers of welded wire meshes has better structural behavior than those beams reinforced with other types of wire meshes. Also the beams reinforced with metal wire meshes give smaller cracks width in comparing with those reinforced with non-metal wire meshes. Also the Finite Element (FE) simulations gave good results comparing with the experimental results.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.2.1-2.1
• /
• 2011

Biomedical applications of electrospun nanofibrous meshes have been receive tremendous attentions because of their unique structures and versatilities as novel biomaterials. Incorporation of growth factors in fibrous meshes can be performed by surface-modification and encapsulation. Those growth factors stimulate differentiation and proliferation of specific types of cells and thus lead tissue regenerations of specific cell types. Topographical cues of electrospun nanofibrous meshes also increase differentiation of specific cell types according to alignments of fibrous structures. Wound healing treatments of diabetic ulcers were performed using nanofibrous meshes encapsulating multiple growth factors. Aligned nanofibrous meshes and those with random configuration were compared for differentiating mesenchymal stem cells into neuronal cells. Thus, nanofibrous meshes can be applied to novel drug delivery carriers and matrix for promoting cellular proliferation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.5 s.236
• /
• pp.671-679
• /
• 2005

A method of generation boundary layer mesh has been presented. This paper describes the generation of semi-unstructured prismatic/tetrahedral meshes for three-dimensional geometries with thin thickness. By of fretting of surface triangle elements prismatic/tetrahedral meshes are generated and using the node relocation method of this research intersected meshes can be efficiently improved. Finally tetrahedral meshes are automatically generated at the rest of the domain. Sample meshes are constructed to demonstrate the mesh generating capability of the proposed algorithm.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.37 no.2
• /
• pp.21-30
• /
• 1995

In order to save time and efforts in generating finite element meshes in irregular houndaries of domains, it is needed to develop an automatic mesh-generator which can hoth promote the accuracy of solutions and reduce the run-time in operating finite ele- ment models. In this study, the advancing front technique of triangular mesh generation and the transforming technique from triangular meshes to quadrilateral meshes were used to de- velop a computer program for the automatic triangular and quadrilateral meshes in the mixed shape. Furthermore, to enhance the quadrilateral mesh quality, the techniques of Laplancian smoothing and interior mesh modification were employed. The mesh genera- tor was applied to evaluate its applicability to irregular and complex geometries such as Nakdong river bay. In has hoen shown that the automatic mesh generator developed is capable of automatically generating meshes for irreguiar and complex geometries with high qualities of meshes and with the simple input data of arbitrarily specified nodal spacing in bound- aries.

• Journal of the Semiconductor & Display Technology
• /
• v.14 no.1
• /
• pp.55-59
• /
• 2015

This study demonstrates hybrid-type transparent electrodes for touch screen panels. The hybrid-type electrodes were fabricated by coating carbon nanotubes (CNTs) on metal meshes. To form the metal-meshes, thin films of silver (Ag) were deposited on glass substrates using the sputtering method and then patterned via photolithography to obtain mesh structures whose line width was $10{\mu}m$ and line-to-line spacing was $300{\mu}m$. CNTs were coated on Ag-meshes by using two different methods, such as spray coating and electrophoretic deposition (EPD). For the samples of a Ag-meshes and CNTs-coated Ag-meshes, their surface morphologies, electrical sheet resistances, and visible-range transmittances and reflectances were characterized and compared. The experimental results indicated that the reflectance of Ag-mesh electrodes was substantially reduced by coating of CNTs. Especially, the hybrid electrodes of Ag-meshes with EPD-coated CNTs showed excellent properties such as sheet resistance lower than $20{\Omega}/{\Box}$, transmittance higher than 90 %, and reflectance lower than 8%.

• Journal of Mechanical Science and Technology
• /
• v.15 no.2
• /
• pp.268-276
• /
• 2001

In order to improve the efficiency of a direct contact heat exchanger for a solar thermal energy system, the working fluid should be dispersed into small and uniform droplets, and stay within a heat exchanger for a long time. Therefore, installation of meshes in a direct contact heat exchanger is suggested in the present study, and the performance of the direct contact heat exchanger with several layers of meshes is experimentally investigated. Diethyl phthalate is used as the working fluid, and the performance of the heat exchanger is tested for several different operating conditions and compared to that of the heat exchanger without meshes. The results of this investigation show that meshes make droplets uniform and small when the flow rate is low. The relationship between the Peclet number and the Nusselt number becomes linear if it is steady. And, the Nusselt number for the direct contact heat exchanger with meshes becomes greater than that without meshes as the Peclet number increases.

• Journal of Biosystems Engineering
• /
• v.30 no.4 s.111
• /
• pp.195-201
• /
• 2005

The output of Stirling engine is influenced by the regenerator effectiveness. The regenerator effectiveness is influenced by heat transfer and flow friction loss of the regenerator matrix. In this paper, in order to provide a basic data for the design of regenerator matrix, characteristics of heat transfer and flow friction loss were investigated by a packed method of matrix in the oscillating flow as the same condition of operation in a Stirling engine. As matrices, several kinds of combined wire screen meshes were used. The results are summarized as follows; The packed meshes with high mesh no. in the side of heater part of regenerator showed effective than the packed meshes with low mesh no. in the side of cooler part of regenerator. The temperature difference and pressure drop of the regenerator were not made by the specific surface area of wire screen meshes but by the minimum free-flow area to the total frontal area. Among the No. 150 single screen meshes, 200-60 combined meshes, the 200-150-100 combined meshes showed the highest in effectiveness.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.4
• /
• pp.173-180
• /
• 2004

The tread pattern of a tire has an important effect on tire performances such as handling, wear, noise, hydroplaning and so on. However, a finite element analysis of a patterned tire with detailed tread blocks has been limited owing to the complexity of making meshes for tread blocks and the huge computation time. The computation time has been shortened due to the advance in the computer technology. The modeling of tread blocks usually requires creating a solid model using a CAD software. Therefore it is a very complicated and time-consuming job to generate meshes of a patterned tire using a CAD model. A new efficient and convenient method for generating meshes of a patterned tire has been developed. In this method, 3-D meshes of tread pattern are created by mapping 2-D meshes of tread geometry onto 3-D tread surfaces and extruding them through tread depth. Then, the tread pattern meshes are assembled with the tire body meshes by the tie contact constraint. Residual aligning torque and frictional energy are calculated by using a patterned tire model and compared to the experimental results. It is shown that the calculated results of a patterned tire model are in a good agreement with the experimental ones.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.04a
• /
• pp.112-115
• /
• 2009

In this paper, flow simulation algorithms for utilizing unstructured hybrid meshes are introduced. First, various types of meshes are introduced. Advantages and disadvantages of each type of meshes are discussed. Unstructured hybrid mesh approach, that is best suited for high speed viscous flow simulation, is presented. Lastly, various types of flow simulations using unstructured hybrid meshes are introduced.