• The Journal of Engineering Geology
• /
• v.5 no.1
• /
• pp.31-44
• /
• 1995

The puppose of this study is to propose the numerical modelling criteria for underground opening, rock mass continuum is regarded as homogeneous rock behaved linear elastic. The results of this study are summarized as follows: - Boundaries of the finite element mesh should be located at least 6 radii away from the center of the opening. - For circular openings, tension only developed when $K_0$ was less than one-fourAs the ratio of initial horiwntal to vertical stress increased, the inward springline movement increased and the inward crown movement decreased. - The displacement patterns developing for opening I shaped horse-shoe and opening II shaped powerstation are similar to those for circular openings. For both type opening I and opening II, stress concentrations develop at the intersection of the wall and floor. Greater stress concentrations are found for the type opening II.

• Journal of the Korean institute of surface engineering
• /
• v.37 no.5
• /
• pp.253-262
• /
• 2004

Calcareous deposits are the consequence of pH increase of the electrolyte adjacent to metal surface affected by cathodic current in seawater. It obviously has several advantages over conventional coatings, since the calcareous deposit coating is formed from coating (Mg$^{2+}$, $Ca^{2+}$) naturally existing in seawater. In consideration of this respect, environment friendly calcareous deposit films were formed by an electro deposition technique on steel substrates submerged in 48$^{\circ}C$ natural seawater. And the influence of current density, coating time and attachment of steel mesh on composition ratio, structure and morphology of the electrodeposited films were investigated by Scanning Electron Microscopy(SEM), Energy Dispersive Spectroscopy(EDS) and X-Ray Diffractor(XRD), respectively. Accordingly, this study provides a better understanding of the composition between the growth of $Mg(OH)_2$ and $CaCO_3$ during the formation of electro deposit films on steel substrate under cathodically electrodeposition in $48^{\circ}C$ natural seawater. The Mg compositions, in general, are getting decreased regardless of current density but Ca compositions are getting increased as electrodeposition time runs. That is, $Mg(OH)_2$ compounds of brucite structure shaped as flat type is formed at the initial stage of electrodeposition, but CaCO$_3$ compounds of aragonite structure shaped as flower type is formed in large scale. Besides, $Mg(OH)_2$ compounds were much formed at 5 A/$\m^2$ environment condition compared to the 3 A/$\m^2$ and 4 A/$\m^2$ environment conditions. This is because that OH- which was comparatively largely generated at the metal surface is preferably combined with $Mg^{2+}$TEX>.

• Wind and Structures
• /
• v.34 no.1
• /
• pp.59-72
• /
• 2022

In this work the numerical results of the flow around a 5:1 rectangular cylinder at Reynolds numbers 3 000 and 40 000, zero angle of attack and smooth incoming flow condition are presented. Implicit Large Eddy Simulations (ILES) have been performed with a high-order accurate spatial scheme and an implicit high-order accurate time integration method. The spatial approximation is based on a discontinuous Galerkin (dG) method, while the time integration exploits a linearly-implicit Rosenbrock-type Runge-Kutta scheme. The aim of this work is to show the feasibility of high-fidelity flow simulations with a moderate number of DOFs and large time step sizes. Moreover, the effect of different parameters, i.e., dimension of the computational domain, mesh type, grid resolution, boundary conditions, time step size and polynomial approximation, on the results accuracy is investigated. Our best dG result at Re=3 000 perfectly agrees with a reference DNS obtained using Nek5000 and about 40 times more degrees of freedom. The Re=40 000 computations, which are strongly under-resolved, show a reasonable correspondence with the experimental data of Mannini et al. (2017) and the LES of Zhang and Xu (2020).

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.1
• /
• pp.67-72
• /
• 2018

This study was conducted to investigate a potential of Yellow poplar (Liriodendron tulipifera L.) as a raw material for the manufacturing of particleboard (PB) and oriented strandboard (OSB). PB panels were prepared at the parameters of $0.7g/cm^3$ density, 15 mm thickness, three-layer, $E_1$ grade urea-formaldehyde (UF) resin, emulsion wax, and hardener. OSB panels were manufactured with a density of $0.65g/cm^3$, thickness of 10 mm, and $E_1$ grade of UF resin. Particle size of the face layer of PB was 20~80 mesh with 7~9% moisture content (MC), while that of core-layer was 3~20 mesh with 3~5% MC, which was similar to the production condition of commercial PB. As a result, the manufactured PB panels with 15.8 mm thickness, $0.7g/cm^3$ density, and 5.8% MC satisfied the requirement of bending strength of 15 type PB of Korean Industrial Standard (KS F 3104). Both internal bonding (IB) strength and surface screw withdrawal resistance also satisfied the requirement of 18 type PB of the standard. But, the edge screw withdrawal resistance satisfied the requirement of 15 type PB of the standard. These differences in properties could be due to the slenderness ratio of raw particles. In case of OSB panels with 10.7 mm thickness, $0.68g/cm^3$ density, and 5.8% MC satisfied all the requirements of bending strength, screw withdrawal resistance, and IB strength of 18 type PB of the standard. These results suggest that Yellow poplar wood has a good potential as a raw material for the production of PB and OSB.

• Journal of Korean Society of Forest Science
• /
• v.75 no.1
• /
• pp.32-37
• /
• 1986

In order to get the fundamental information that could be useful to judge the potentiality of occurrence of rapid shallow landslide in the objective slope, factors selected on Jinhae regions in Korea, where many landslides were caused by heavy rainfall of daily 465 mm and hourly 52mm in August 1979, was carried out through the multiple statistics of quantification method (II) by the electronic computer. The net system with $2{\times}2cm$ unit mesh was overlayed with the contour map of scale 1:5000. 74 meshes of landslides and 119 meshes of non-landslide were sampled out to survey the state of vegetative cover and geomorphological conditions, those were divided into 6 items arid 27 categories. As a result, main factors that would lead to landslide were shown in order of vegetation, slope type, slope position, slope, aspect and numbers of stream. Particularly, coniferous forest of 10 years old, concave slope and foot of mountain were main factors making slope instability. On the contrary, coniferous forest of 20-30 years old, deciduous forest, convex slope and summit contributed to the stable against Landslide. The boundary value between two groups of existence and none of landslides was -0.123, and its prediction was 72%. It was well predicted to divide into two groups of them.

• Korean Journal of Community Nutrition
• /
• v.12 no.2
• /
• pp.189-197
• /
• 2007

Low glycemic index (GI) foods have been reported to be very important in the control of blood glucose levels in diseases such as diabetes mellitus and obesity, which are becoming more prevalent in Korea. Bread consumption at breakfast and as a snack is also on the rise. To provide low GI alternatives, breads supplemented with dietary fibers-fructooligosaccharide (FOS), ground whole rye, and 2 types of resistance starch (RS2 and RS4)-were developed. The GIs for these breads were evaluated with 13 healthy college students (M6, F7) and sensory tests were done. Four kinds of breads were made through the modification of a basic recipe for white bread (the control, B) as follows: for Bf, the entire amount of sugar was replaced with FOS. For Ryef, 50% of the white wheat flower was replaced with roughly ground wholerye (20 mesh: 12-20 mesh = 1 : 3) in addition to replacing sugar with FOS. For RS2f and RS4f, 20% of the white wheat flower was replaced with RS2 or RS4, in addition to replacing sugar with FOS. The overall preference score of Bf was similar to that of B, while those of Ryef, RS2f and RS4f were lower than that of B, but showed the acceptable degree of the overall preference. The glycemic indices of Ryef and RS2f were 46.1 and 45.9 respectively, which were significantly lower than the GI of B, 67.8. The GIs of Bf and RS4f were, however, 66.7 and 80.5 respectively, showing no significant difference compared to B. The glycemic loads for a 30 g serving were 9.5, 5.9, 6.2, 11.0 and 9.0 for B, Bf, Ryef, RS2f and RS4f, respectively. In conclusion, addition of RS2 or roughly ground whole rye to the dough formula significantly lowered the GI. Since the preferences shown for those two breads were acceptable, they may be recommended as a substitute for white bread fir persons who need blood glucose management. More studies on the bread making process are required to improve preference and acceptance. Although GI lowering effects for F and RS4 were not found in this study, further studies are needed to verify their effects.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.4
• /
• pp.299-304
• /
• 2013

The HAN which is an ionic liquid is a non-toxic monopropellant with high storability, and its specific impulse can be increased by blending methanol, thereby it can substitute the hydrazine. The HAN was synthesized by acid-base reaction of hydroxylamine and nitric acid, and the blending ratio of HAN and methanol is 8.2:1. The iridium catalyst was used to decompose the HAN, and 1 N class thruster with shower head type injector having one orifice was used to evaluate the HAN/Methanol propellant. The thermal stability of distributor was increased by using ceramic material to endure the high temperature of product gas. The preheating temperature of catalyst should be $400^{\circ}C$ at least for the complete decomposition. The feeding pressure should be increased to increase the $C^*$ efficiency, thereby the decomposition performance was decreased upstream catalyst, and the performance of thruster was decreased. The fine metal mesh was inserted after the injector to improve the atomization of propellant, thereby it can settle the performance decrease problem. The phenomenon of performance decrease was remarkably improved owing to the insertion of fine metal mesh.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.8 no.2
• /
• pp.60-70
• /
• 2000

The swine wastewater from slurry feedlot has been a social problem in Korea since the proper treatment is very difficult. Therefore, a practical study on the Solid-Liquid separation of swine wastewater from slurry feedlot was carried out as a pan of pretreatment for the successful biological treatment. The appropriate type of coagulant and optimum dosage were proposed for the most efficient Solid-Liquid separation and the best Solid-Liquid separation methods for different size of feedlot were determined through the tests with field-scaled Solid-Liquid separation equipment. The appropriate coagulant for the conditioning of dewatering property was E-851, which is a cationic polyelectrolyte made of polyacrylamide, and the optimum dosage was 0.24~0.6% of unit solids weight. Mesh Screen, Drum Screen, Cyclone Drum Filter, Screw Press, High-speed Screw Decanter, Low-speed Screw Decanter, and Dissolved Air Flotation Process had been investigated in this study. According to the results, the Screw Press was the best dewatering equipment for the small & medium size for feedlot and low-speed Screw Decanter was the best for the large size feedlot & public owned treatment facilities for the primary Solid-Liquid separation, and the most suitable secondary treatment process was DAF. On the other hand, reductions for the requirement of bulking agent and organic loading by Solid-Liquid separation process were 94.8% and 84.7%, respectively Therefore, the Solid-Liquid separation process must be required for the successful treatment of swine wastewater from slurry feedlot.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.4
• /
• pp.225-235
• /
• 2020

Ultrasonic investigation of damage detection has been widely used for non-destructive testing of various concrete structures. This study focuses on damage detection analysis with the aid of wave propagation in two-phase composite concrete with aggregate (inclusion) and mortar (matrix). To fabricate a realistic simulation model containing a variety of irregular aggregate shapes, the mesh generation technique using an image processing technique was proposed. Initially, the domains and boundaries of the aggregates were extracted from the digital image of a typical concrete cut-section. This enables two different domains: aggregates and mortar in heterogeneous concrete sections, and applied the grids onto these domains to discretize the model. Subsequently, finite element meshes are generated in terms of spatial and temporal requirements of the model size. For improved analysis results, all meshes are designed to be quadrilateral type, and an additional process is conducted to improve the mesh quality. With this simulation model, wave propagation analyses were conducted with a central frequency of 75 kHz of the Mexican hat incident wave. Several void damages, such as needle-shaped cracks and void-shaped holes, were artificially introduced in the model. Finally, various formats of internal damage were detected by implementing energy mapping based signal processing.

• Journal of Korean Society of Forest Science
• /
• v.81 no.1
• /
• pp.40-52
• /
• 1992

The use of meteorological information is essential in the industrial society. More specialized weather services are required to perform better industrial activities including forestry. A topoclimatological technique, in this study, which makes use of empirical relationships between the topography and the weather in Cheju Island was applied to produce reasonable estimates of monthly air temperatures over remote land area where routine observations are rare. Altitude values of the 250m grid points were first read from a 1 : 25000 topographic map. The mean altitude and other valuable topographical variables were then determined for each $1km^2$ land area. Daily minimum, maximum and mean air temperature data were collected from 19 points in Cheju Island from June 1987 to September 1988. The data were analyzed and grouped into 36 sets by type of air temperature and by month. Each of data set was regressed to the topographical variables to delineate empirical relationships between the local air temperature and the site topography. The total of 36 regression equations were finally selected and the equations were used to calculate the monthly air temperature for each $1km^2$ land area. The outputs were presented in a fine-mesh grid map with a 6-level contour capability.