• 한국식품과학회지
• /
• 제29권5호
• /
• pp.987-991
• /
• 1997

솔비톨의 형태와 입자크기가 무설탕 츄잉껌의 텍스쳐에 미치는 영향을 살펴보기 위하여 두 가지 형태인 치밀한 구조를 지닌 P-type과 듬성한 구조를 지닌 S-type의 솔비톨과 50 mesh와 100 mesh의 솔비톨을 사용하였다. 츄잉껌에 사용한 솔비톨 형태는 S-type이 P-type보다 더 유연하였고, 50 mesh의 솔비톨 보다 100 mesh가 더 유연하였다. 솔비톨의 강도는 S-type보다 P-type에서 컸으며 50 mesh보다 100 mesh에서 크게 나타났다. 이것은 덜 치밀한 구조를 지닌 솔비톨이 사용된 무설탕 츄잉껌이 높은 유연성과 낮은 강도를 보여 줌을 의미하고 입자의 크기가 작은 솔비톨을 사용할수록 무설탕 츄잉껌의 유연성과 강도가 증가됨을 의미한다. 그러므로 본 실험에서는 유연성이 높고 강도가 상대적으로 낮은 S-type의 솔비톨을 무설탕 츄잉껌의 원료로 선택하였다. 선택한 S-type 솔비톨이 함유된 무설탕 츄잉껌의 솔비톨의 입자크기에 따른 유연성과 강도를 측정한 결과 80 mesh 입자가 츄잉껌의 고체상 원료로 적합하였다. 80 mesh의 S-type 솔비톨이 함유된 무설탕 츄잉껌의 온도변화에 따른 유연성과 강도를 측정하였다. 실험 결과 온도가 증가할수록 무설탕 츄잉껌의 유연성은 증가하였으나 강도는 감소하였다.

• 수산해양기술연구
• /
• 제30권3호
• /
• pp.172-181
• /
• 1994

The mesh selectivity of diamond and suare mesh cod-ends at the Southern Korean Sea and the East China Sea were compared for Pampus argenteus, Trachurus japonicus, Trichiurus lepturus. Selection trials were carried out using diamond and square mesh cod-end by trouser type cod-end with cover net. of which the mesh cod-end has four types : A(51.2mm), B(70.2mm), C(77.6mm), D(88.0mm). Selection curves and selection parameters were calculated using a logistic model. The results obained are summarized as follows : 1. Harvest fish : In B. C and D type selection range and fifty percent selection length of the square mesh were about 21mm, 11mm : 12mm, 18mm and 34mm, 5mm higher than those of the diamond mesh, respectively. Selection factor of master curve for the diamond mesh was 1.54 and for the square mesh was 1.68. The optimum mesh size for the diamond mesh was 97.4mm and for the square mesh was 89.3mm, the difference was 8.1mm. 2. Horse mackerel : In A type, selection range was nearly the same for the diamond and the square mesh, but fifty percent selection length of the square mesh was 43mm higher than the diamond mesh. In B. C and D type, selection range and fifty percent selection length of the square mesh were about 6mm, 3mm : 24mm, 21mm and 11mm, 42mm higher than those of the diamond mesh, respectively. Selection factor of master curve for the diamond mesh was 2.37, for the square mesh was 2.77. The optimum mesh size for the diamond mesh was 78.1mm and for the square mesh was 66.8mm, the difference was 11.3mm. 3. Hair tail : In A, B and C type, selection range of the square mesh was about 34mm, 8mm, 60mm higher than those of the diamond mesh. Fifty percent selection length for the diamond mesh was about 5mm, 7mm, 8mm higher than that of the square mesh. Selection factor of master curve for the diamond mesh was 3.11, for the square mesh was 3.48. The optimum mesh size for the diamond mesh was 64.3mm and for the square mesh was 57.5mm, the difference was 6.8mm.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.1227-1232
• /
• 2000

In this study the mechanical properties of various wire mesh reinforcing porous concrete mixtures are investigated. A properly designed porous concrete pavements provides a durable riding surface. It also eliminates puddles and standing water, resulting in improved skid resistance. The most popular application is that of light-traffic volume roadways such as parking lots, resident roads, driveways, and sidewalks. Flexural strength and toughness index are examined for wire mesh reinforcing porous concrete. Type of Wire mesh is divided into three cases, A type, B type and C type. It shows A type is most excellent shape of destruction of slab specimen is similar to that of flexural specimen. The aim of this paper is to present the results of a pilot study undertaken to examine the extent to which wire mesh reinforced porous concrete can be used as a continuous paving materials.

• 한국유체기계학회 논문집
• /
• 제15권1호
• /
• pp.46-51
• /
• 2012

This study is to confirm the deformation of blade when the location of stacking is moving. Also, it desire to determine the most stable location of stacking from the analysis. In the previous study, it is Known that moving the location of stacking is not influence to the aerodynamic performance. In this study SolidWorks premium 2010 SP4 is used for structure analysis. In reference blade and other 3 model analysis, the two mesh type is used, one is standard mesh type in SolidWorks, the other is curvature-based mesh type. The result of curvature-based mesh type is more stable than one of the standard mesh type regardless of mesh size, the number of mesh. The deformation of blade tip is the smallest, when the location of stacking is identical to the center of gravity of the blade section profile. So, if possible is design, this study recommends that the location of stacking is identical to the center of gravity the blade.

• 대한토목학회논문집
• /
• 제39권2호
• /
• pp.247-256
• /
• 2019

본 연구에서는 홍수모델링을 위해 삼각격자와 사각격자를 포함하는 혼합격자의 적용이 가능한 2차원 Godunov형 유한체적모형을 이용하여 격자형상과 해상도에 따른 홍수위, 홍수범람범위, 모형의 계산시간을 비교 분석하였다. 연구유역은 2000년 10월 29일부터 11월 19일까지 22일 동안 홍수가 발생한 영국의 Upton-upon Severn 유역이다. 홍수 모델링을 위해 고해상도 LiDAR (Light Detection And Ranging)를 이용하여 지형자료를 구축하였으며, 격자유형 및 해상도에 따른 2차원 홍수모델링 결과는 홍수기간 동안 촬영된 4개의 ASAR (Airborne Synthetic Aperture Radar) 영상자료와 비교하였다. 본 연구는 동일한 지형과 경계조건을 사용하더라도, 격자의 형상과 해상도에 따라 홍수위와 범람범위가 큰 차이를 가질 수 있음을 보여주었으며, 2차원 홍수모델링의 목적과 상황에 맞는 적절한 격자유형과 해상도의 선택이 필요함을 보여준다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제40권
• /
• pp.35.1-35.7
• /
• 2018

Background: After the resection at the mandibular site involving oral cancer, free vascularized fibular graft, a type of vascularized autograft, is often used for the mandibular reconstruction. Titanium mesh (T-mesh) and particulate cancellous bone and marrow (PCBM), however, a type of non-vascularized autograft, can also be used for the reconstruction. With the T-mesh applied even in the chin and angle areas, an aesthetic contour with adequate strength and stable fixation can be achieved, and the pores of the mesh will allow the rapid revascularization of the bone graft site. Especially, this technique does not require microvascular training; as such, the surgery time can be shortened. This advantage allows older patients to undergo the reconstructive surgery. Case presentation: Reported in this article are two cases of mandibular reconstruction using the ready-made type and custom-made type T-mesh, respectively, after mandibular resection. We had operated double blind peer-review process. A 79-year-old female patient visited the authors' clinic with gingival swelling and pain on the left mandibular region. After wide excision and segmental mandibulectomy, a pectoralis major myocutaneous flap was used to cover the intraoral defect. Fourteen months postoperatively, reconstruction using a ready-made type T-mesh (Striker-Leibinger, Freibrug, Germany) and iliac PCBM was done to repair the mandible left body defect. Another 62-year-old female patient visited the authors' clinic with pain on the right mandibular region. After wide excision and segmental mandibulectomy on the mandibular squamous cell carcinoma (SCC), reconstruction was done with a reconstruction plate and a right fibula free flap. Sixteen months postoperatively, reconstruction using a custom-made type T-mesh and iliac PCBM was done to repair the mandibular defect after the failure of the fibula free flap. The CAD-CAM T-mesh was made prior to the operation. Conclusions: In both cases, sufficient new-bone formation was observed in terms of volume and strength. In the CAD-CAM custom-made type T-mesh case, especially, it was much easier to fix screws onto the adjacent mandible, and after the removal of the mesh, the appearance of both patients improved, and the neo-mandibular body showed adequate bony volume for implant or prosthetic restoration.

• 수산해양교육연구
• /
• 제25권4호
• /
• pp.928-936
• /
• 2013

This thesis is the fundamental study on the adaptation of escape device for reducing small fishes in set-net. The escape devices for experiments were made the mesh-type devices with three different mesh sizes (60.6, 75.8 and 120.0mm). The experiments of size selectivity on escape devices were conducted by using two kinds of species as black rockfish (Sebastes schlegeli) and sea perch (Lateolabrax maculatusi) in the experimental tank. The size selectivity curve was fitted by using a logistic function and the parameters of selectivity curve were estimated by a maximum likelihood method. In the results; 50% selection ranges for the mesh-type escape devices with three different mesh sizes were; a black rockfish was 18.99 in mesh size 60.6mm and 21.96 in mesh size 75.8mm (120mm could not estimate). A sea perch was 22.02 in mesh 60.6mm and 24.46 in mesh size 75.8mm (120mm could not estimate). The 50% selection range of a black rockfish was wilder than a sea perch about 1.1~.2 time. Therefore, the small fishes are able to reduce by using the mesh type escape device. However, the optimum mesh size should be decided to consider the size of target species and economics of catches.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2004년도 춘계 학술대회논문집
• /
• pp.77-82
• /
• 2004

A new anisotropic mesh refinement method is proposed. The new method is based on a simple second order interpolation error indicator. Therefore, it is methodologically direct and intuitive as compared with traditional anisotropic refinement strategies. Moreover, it does not depend on the mesh type. The error indicator is face-wisely calculated for all faces in a mesh and the cell refinement type is determined by the configuration of face markings with a given threshold. For the sake of simplicity, an application for a poisson equation on a triangle mesh is considered. The error field and resultant mesh refinement pattern are compared and effects of the threshold selection are discussed. Applying anisotropic refinement with various thresholds, we observed higher convergence rates than those in the uniform refinement cases.

• 한국가시화정보학회지
• /
• 제9권3호
• /
• pp.38-43
• /
• 2011

When draining takes place through an axially located drain port in a cylindrical tank without any prevent, a vortex with an air core occurs. In this study, semi spherical concave and convex meshes with different size inner hole are used to find the air core can suppress. The study is carried out with different values of inner hole of mesh and different install direction of semi spherical mesh using PIV and measured velocity distribution. By providing a mesh, the air core can be prevented, even if the ratio of inner hole of mesh and diameter of cylinder is around 0.66. The experimental results show that a convex mesh type is more effective to suppress the air core generation than a concave mesh type.

• 대한치과기공학회지
• /
• 제42권2호
• /
• pp.91-98
• /
• 2020

Purpose: This study is to compare the flexural strength and modulus by inserting a mesh and stick type fiberglass reinforcement into resin specimens. Methods: Wax specimens (length 64 mm, width 39 mm, thickness 5 mm) are prepared according to ISO 20795-1:2013. Mesh type and stick type glass fiber reinforcements were prepared. The prepared wax specimens were used plaster and flask for investment. The flask was separated and the wax was removed. The heat curing resin was injected into the flask, and then a mesh type and stick type fiberglass reinforcement were inserted. The prepared resin specimen was cut into three equal parts (length 64 mm, width 10 mm, thickness 3.3 mm). The mesh type glass fiber reinforcement (MT group) and the stick type glass fiber reinforcement (ST group) were classified into two groups. The prepared specimen was measured using a universal testing machine (UTM). The data were analyzed by Mann-Whitney U test, and the significance level was set to 0.05. Results: In the flexural strength, the ST group was higher than the MT group, and there was a significant difference between the two groups (p<0.05). In the flexural modulus, the ST group was higher than the MT group, and there was a significant difference between the two groups (p<0.05). Conclusion: The stick-type glass fiber inreased the flexural strength than the mesh-type glass fiber reinforcement.