• 수산해양기술연구
• /
• 제40권3호
• /
• pp.176-181
• /
• 2004

피뿔고동(통칭 소라) 통발의 망목선택성 및 적정 망목을 추정하기 위하여 2003년 6월 27일${\sim}$6월 29일까지 전북 군산시 말도 인근 해역에서 시험조업을 실시하였다. 시험어구는 망목 35mm, 50mm 및 65mm의 3종류의 그물감을 씌운 통발을 교호로 각각 70개씩 210개를 1개조로 구성하여 2개조를 사용하였으며, 망목선택성 곡선의 분석에는 Kitahara(1968)의 방법을 이용하였다. 그 결과를 요약하면 다음과 같다. 1. 피뿔고동 통발의 시험조업 결과 총어획미수는 1,682마리였으며, 피뿔고동 1,268마리 (75.4%), 배꼽고동 225마리 (13.4%), 쥐노래미 113마리 (6.7%), 기타 76마리 (4.5%) 등이었다. 2. 피뿔고동의 최대 각고/망목(max. 1/m)의 값은 1.79로 추정되었다. 3. 50% 선택구간에 대한 각고/망목(max. 1/m)의 값은 1.79로 추정되었다. 3. 50% 선택구간에 대한 각고/망목(1/m)의 값은 1.24${\sim}$2.72으로 추정되었으며, 그 선택폭은 1.48이었다. 4. 피뿔고동의 어획금지체장(각고) 50mm에 대한 적정 망목은 40.3mm로 추정되었으며, 피뿔고동의 50% 선택각고 범위는 50.0${\sim}$109.6mm로 나타났다.

• 한국인쇄학회지
• /
• 제28권1호
• /
• pp.43-50
• /
• 2010

The 200mesh screen was tensioned and fixed on a frame. When applied tension to 5N and 10N per unit area, a side length of opening of the screen was 163.223${\mu}m$ and 168.224${\mu}m$, respective. But side length not tensioned was 158.879${\mu}m$. We knew that a side length of opening of the screen rarely changes with tension applied to the screen. The appearances that a side length of opening of the screen expand little are due to a decreasing diameter of thread by means of tension. In a thickness measurement of screen, While the high density mesh screen that had a lot of knots that crossed a line of latitude and longitude per unit area appeared a higher numerical value, the low density mesh screen that had a few knots appeared a low numerical value.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 추계학술대회 논문집
• /
• pp.62-65
• /
• 2000

For saving time and cost of experiment Finite Element Method has been developed for several decades. It's the defect of FEM that when we are in processing of finite element analysis, the material if deformed so much that we can't proceed analysis any more. In this case, the remeshing process should be done on this material. In hot forging process, almost all remeshing process does not consider flash of the material. Because as mesh size become swatter, consuming time become larger. But if mesh size is big, there is the defect that the result of analysis is not so accurate. So, new remeshing algorithm is needed to save time and to get more accurate result.

• 소성∙가공
• /
• 제9권1호
• /
• pp.59-65
• /
• 2000

Most studies of failure analysis in ductile metals have been based on the classical plasticity theory using the local constitutive relations. These frequently yields a physically unrealistic solution, in which a numerical prediction of the onset of a deformation localization shows an inherent mesh-size sensitivity. A one way to remedy the spurious mesh sensitivity resulted in the unreasonable results is to incorporate the non-local plasticity into the simulation model, which introduce an internal (material) length-scale parameter into the classical constitutive relations. In this paper, a non-local version of the modified Gurson constitutive relation has been introduced into the finite element formulation of the simulation for plane strain compression of the visco elastic-plastic void material. By introducing the non-local constitutive relations we could successfully removed the inherent mesh-size sensitivity for the prediction of the deformation localization. The effects of non-local constitutive relation are discussed in terms of the load-stroke curve and the strain distributions accross the shear band.

• 한국가시화정보학회지
• /
• 제9권3호
• /
• pp.38-43
• /
• 2011

When draining takes place through an axially located drain port in a cylindrical tank without any prevent, a vortex with an air core occurs. In this study, semi spherical concave and convex meshes with different size inner hole are used to find the air core can suppress. The study is carried out with different values of inner hole of mesh and different install direction of semi spherical mesh using PIV and measured velocity distribution. By providing a mesh, the air core can be prevented, even if the ratio of inner hole of mesh and diameter of cylinder is around 0.66. The experimental results show that a convex mesh type is more effective to suppress the air core generation than a concave mesh type.

• 수산해양기술연구
• /
• 제48권4호
• /
• pp.322-336
• /
• 2012

To study the catching efficiency of biodegradable trammel net for swimming crab (Portunus trituberculatus), three types (biodegradable, monofilament and multifilament) of trammel nets were used in the field test, and the tests were carried out 16 times with two different mesh sizes (105mm and 160mm) in the Yeonpyeong fishing ground of Korea, 2009~2011. The catching efficiency of three type nets was analyzed by catch in number, catch in weight and average weight per individual of small and large size swimming crab by net types and mesh sizes. Statistical T-test was also carried out to verify the efficiency between the three types of nets. The results are as follows. The catch in number of swimming crab was 24,667 and formed about 81.0% of total catch. Of all swimming crab catch, small swimming crabs with less than 64mm in carapace length which is a prohibited landing size by law formed 48.1%, larger swimming crabs with more than 64mm in carapace length which is a landing size formed 51.9%. In 105mm mesh size trammel net test, the catch share in number of small size swimming crab by biodegradable trammel net was 47.5% in comparison with multifilament trammel net and 74.2% in comparison with monofilament trammel net, so biodegradable trammel net has more protective effects on small size swimming crab than other types of trammel nets. The protective effects for small size swimming crab by biodegradable trammel net was 25.8~52.5% in comparison with other types of trammel nets. The catch share in weight of large size swimming crab by biodegradable trammel net was 98.3% in comparison with multifilament trammel net and 92.3% in comparison with monofilament trammel net, so biodegradable trammel net has a similar catch efficiency to multifilament trammel net. The results of 160mm mesh size trammel net test have shown similar results of 105mm mesh size trammel net test. This study shows that biodegradable trammel net is a more useful fishing gear than multifilament and monofilament trammel net because biodegradable trammel net has lower catch rate than other types of nets in small size swimming crab and similar catch rate than multifilament trammel net which is a well used net by fishermen.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제27회 추계학술대회논문집
• /
• pp.377-381
• /
• 2006

본 논문에서는 노즐출구 단면에 설치된 메쉬 스크린을 이용하여 초음속 제트 소음 제어하기 위한 실험을 수행하였다. 메쉬 스크린은 미소 직경을 가진 스테인레스 철사들로 만들어졌으며 철망 형태이다. 노즐 압력비는 과팽창에서 부족팽창된 초음속 제트를 얻기 위해 다양하게 변화시켰다. 초기 제트 전단층을 교란하기 위해, 메쉬 스크린의 중앙 부분에 구멍을 만들었으며 그 구멍크기는 메쉬 스크린의 소음 저감효과를 조사하기 위해 변화시켰다. 유동장을 가시화하기 위해 쉴리렌 광학 장치를 사용하였고 OASPL과 소음 스펙트럼을 얻기 위해 음향을 측정하였다. 본 실험으로부터 얻어진 결과는 메쉬 스크린이 스크리치 톤을 상당히 억제하였으며, 메쉬 스크린의 구멍크기는 초음속 제트 소음을 저감하는 중요한 인자였다. 과팽창된 제트인 경우, 소음 저감효과는 적정팽창과 부족팽창된 제트에서의 저감효과보다 매우 크게 나타났다.

• 수산해양기술연구
• /
• 제28권4호
• /
• pp.371-379
• /
• 1992

In order to analyse the mesh selectivity for the trawl net, the fishing experiment was carried out by the training ship Saebada in the southern Korea Sea and the East China Sea from June 1991 to August 1992. The trawl net used in experiment has the trouser type of cod-end with cover net, and the mesh selectivity was examined for the five kinds of the opening mesh size in its cod-end part. The selection curves and the selection parameters were calculated by using a logistic function, S=1/(1+exp super(-(aL+b))), and in this case, a and b are the selection parameters and L is the body length of the target species of fishes. In this report, the four species of aquatic animals were analysed because the catch data were enough to calculate normally the selection curves and the selection parameters, and the results obtained are summarized as follows: 1. Trachurus japonicus; Selection parameters a and b in each cases of the opening mesh size of 51.2mm, 70.2mm, 77.6mm, 88.0mm and 111.3mm were respectively 0.5050 and -5.4283, 0.3018 and -4.9590, 0.3816 and -7.3659, 0.2695 and -5.7958, 0.2170 and -5.1226. 2. Photololigo edulis ; Selection Parameters a and b in each cases of the former mesh sizes were respectively 0.7394 and -6.1433, 0.3389 and -4.2366, 0.3286 and -5.1002, 0.2543 and -5.0049, 0.1795 and -4.8040. 3. Trichirus lepturus; Selection curves in the opening mesh size of 111.3mm was calculated unnormally. The selection parameters in the other opening mesh sizes were respectively 0.3790 and -5.2891, 0.2071 and -4.9164, 0.1292 and -3.1733, 0.1153 and -3.8497 in the order of former mesh sizes except 111.3mm. 4. Todarodes pacificus ; Selection curve in case of the opening mesh sizes, 70.2mm and 111.3mm were calculated unnormally. In the order cases of the opening mesh sizes, the selection parameters were respectively were 0.5766 and -6.0169, 0.3735 and -5.4633, 0.2771 and -5.7718 in the order of former mesh sizes except 70.2mm and 111.3mm.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.1161-1166
• /
• 2008

The objective of this research was to investigate the enhancement of heat transfer by mesh in water/air direct contact air conditioning system. Mesh is inserted as a turbulent promoter in front of the water injection nozzle. The heat transfer characteristics with and without mesh and the effect of the number of inserted mesh and mesh porosity size have been studied experimentally. Inserted mesh improves heat transfer efficiency compared to non-inserted mesh system and heat transfer efficiency increased as the number of mesh is increased. Meanwhile, heat transfer efficiency decreased as the porosity of the mesh is increased. With inserted mesh, inlet and outlet temperature difference of air increased more than 50%. Heat exchange time of water/air to reach the 100% humidity decreased less than 30%. This result shows inserted mesh can enhance the performance of the water/air direct contact air conditioning system.

• 설비공학논문집
• /
• 제20권1호
• /
• pp.75-80
• /
• 2008

The objective of this research was to investigate the enhancement of heat transfer by mesh in water/air direct contact air conditioning system. Mesh is inserted as a turbulent promoter in front of the water injection nozzle. The heat transfer characteristics with and without mesh and the effect of the number of inserted mesh and mesh porosity size have been studied experimentally. Inserted mesh improves heat transfer efficiency compared to non~inserted mesh system and heat transfer efficiency increased as the number of mesh is increased. Meanwhile, heat transfer efficiency decreased as the porosity of the mesh is increased. With inserted mesh, inlet and outlet temperature difference of air increased more than 50%. Heat exchange time of water/air to reach the 100% humidity decreased less than 30%. This result shows inserted mesh can enhance the performance of the water/air direct contact air conditioning system.