• 청정기술
• /
• 제16권4호
• /
• pp.254-257
• /
• 2010

중국 Liaoning에서 산출된 천연 수활석(brucite)을 원료로 $Mg(OH)_2$ slurry를 제조하고, 그 탈황 성능을 조사하였다. 수활석의 입도분포의 차이 및 수열처리에 의한 활성화 효과를 검토하였다. 80 mesh 이하의 수활석 시료에 비해 입자의 크기가 작고 입도분포가 좁은 1000 mesh 이하의 사료가 de-$SO_2$ 효율이 더 높은 것을 확인할 수 있었다. 한편, 80 mesh 이하의 수활석 시료를 비교적 낮은 온도인 363 K에서 3 h 동안 수열 처리하여 매우 높은 de-$SO_2$ 성능 개선 효과를 얻을 수 있었다.

• ETRI Journal
• /
• 제44권1호
• /
• pp.85-93
• /
• 2022

We propose an efficient method for synthesizing mesh-based realistic computer-generated hologram (CGH). In a previous nonanalytic mesh-based CGH synthesis, the angular spectrum of the two-dimensional (2D) plane is calculated using the fast Fourier transform (FFT) with the same size as the resolution of the final hologram. Because FFT increases the computation time as the size of the input matrix increases, the previous method has a problem: The higher the resolution of the hologram, the greater the computational load, thereby delaying synthesis time. In this study, when calculating the angular spectrum of the 2D plane in mesh-based CGH synthesis, we propose a method to calculate the angular spectrum by defining the 2D plane with an arbitrary size smaller than the resolution of the final hologram. The resolution adjustment method reduces the computation time and can be applied to occlusion culling and texturing for the realistic effect of mesh-based CGH. We describe the principle, error analysis, application of realistic effect, and experimental results of the proposed method.

• Biomaterials and Biomechanics in Bioengineering
• /
• 제3권2호
• /
• pp.71-84
• /
• 2016

The finite element method is wide used in simulation in the biomechanical structures, but a lack of studies concerning finite element mesh quality in biomechanics is a reality. The present study intends to analyze the importance of the mesh quality in the finite element model results from humeral structure. A sensitivity analysis of finite element models (FEM) is presented for the humeral bone and cartilage structures. The geometry of bone and cartilage was acquired from CT scan and geometry reconstructed. The study includes 54 models from same bone geometry, with different mesh densities, constructed with tetrahedral linear elements. A finite element simulation representing the glenohumeral-joint reaction force applied on the humerus during $90^{\circ}$ abduction, with external load as the critical condition. Results from the finite element models suggest a mesh with 1.5 mm, 0.8 mm and 0.6 mm as suitable mesh sizes for cortical bone, trabecular bone and humeral cartilage, respectively. Relatively to the higher minimum principal strains are located at the proximal humerus diaphysis, and its highest value is found at the trabecular bone neck. The present study indicates the minimum mesh size in the finite element analyses in humeral structure. The cortical and trabecular bone, as well as cartilage, may not be correctly represented by meshes of the same size. The strain results presented the critical regions during the $90^{\circ}$ abduction.

• 대한기계학회논문집A
• /
• 제25권6호
• /
• pp.1004-1014
• /
• 2001

The fully automatic algorithm from initial finite element mesh generation to remeshing in two dimensional geometry is introduced using bubble packing method (BPM) for finite element analysis. BPM determines the node placement by force-balancing configuration of bubbles and the triangular meshes are made by Delaunay triangulation with advancing front concept. In BPM, we suggest two node-search algorithms and the adaptive/recursive bubble controls to search the optimal nodal position. To use the automatically generated mesh information in FEA, the new enhanced bandwidth minimization scheme with high efficiency in CPU time is developed. In the remeshing stage, the mesh refinement is incorporated by the control of bubble size using two parameters. And Superconvergent Patch Recovery (SPR) technique is used for error estimation. To verify the capability of this algorithm, we consider two elasticity problems, one is the bending problem of short cantilever beam and the tension problem of infinite plate with hole. The numerical results indicate that the algorithm by BPM is able to refine the mesh based on a posteriori error and control the mesh size easily by two parameters.

• Journal of Mechanical Science and Technology
• /
• 제18권11호
• /
• pp.1989-1995
• /
• 2004

Finite element analysis(FEA) is the most popular numerical method to simulate plasticity-induced fatigue crack closure and can predict fatigue crack closure behavior. Finite element analysis under plane stress state using 4-node isoparametric elements is performed to investigate the detailed closure behavior of fatigue cracks and the numerical results are compared with experimental results. The mesh of constant size elements on the crack surface can not correctly predict the opening level for fatigue crack as shown in the previous works. The crack opening behavior for the size mesh with a linear change shows almost flat stress level after a crack tip has passed by the monotonic plastic zone. The prediction of crack opening level presents a good agreement with published experimental data regardless of stress ratios, which are using the mesh of the elements that are in proportion to the reversed plastic zone size considering the opening stress intensity factors. Numerical interpolation results of finite element analysis can precisely predict the crack opening level. This method shows a good agreement with the experimental data regardless of the stress ratios and kinds of materials.

• 한국식품저장유통학회지
• /
• 제17권4호
• /
• pp.513-518
• /
• 2010

멸치분말의 저장안정성을 알아보고자 80 mesh이상, 80-60 mesh, 60-40 mesh로 입자크기에 따라 분급하여 흡습특성을 조사하고 평형수분함량의 예측 모델식을 수립하였다. 평형수분함량은 수분활성도가 높아짐에 따라 빠르게 증가하는 양상이었으며, 높은 온도에서 낮은 함량을 나타내었다. 단분자층 수분함량은 BET식보다 GAB식이 더 높은 유의성을 보였으며 그 함량은 0.022-0.029 g $H_2O/g$ dry solid 였다. 수분활성도가 증가함에 따라 필요로 하는 흡습에너지가 낮아져 흡습엔탈피는 감소하여 흡습이 쉽게 이루어짐을 알 수 있었다. 등온흡습곡선의 적합도는 Kuhn 모델이 $R^2$ 0.94 이상으로 높은 적합도를 나타내었고, Halsey, Caurie, Oswin 모델순으로 적합도를 나타내었다. 흡습 중 평형상대습도 예측 모델을 수립하기 위해 온도와 수분활성도의 경우 일차함수, 시간의 경우 ln 함수가 높은 적합도를 보였으며, 수분활성도 예측모델식은 입자의 크기에 관계없이 상대습도와 시간으로 수립한 모델식의 적합도가 적절한 것으로 나타났다.

• 정보처리학회논문지A
• /
• 제16A권4호
• /
• pp.223-226
• /
• 2009

하이퍼큐브와 많은 면에서 비슷하면서도 절반 정도의 지름을 가지는 등 개선된 망 성질들을 가지는 꼬인 큐브는 병렬처리 시스템의 상호연결망으로 각광 받아 왔다. 짝수인 m 에 대하여 크기가 $2{\times}2^m$인 메쉬가 연장률 1과 확장율 1로, 혹은 크기가 $4{\times}2^m$인 메쉬가 연장율 1과 확장율 2로 꼬인 큐브에 임베딩됨은 최근에 알려졌다 [Lai and Tsai, 2008]. 그러나 양변의 길이가 모두 8 이상인 메쉬가 꼬인 큐브에 연장율 1로 임베딩되는지는 알려진 바가 없다. 본 논문에서는 m 이 짝수일 경우엔 크기 $2^n{\times}2^m$인 메쉬가 꼬인 큐브에 연장율 1, 확장율 $2^{n-1}$ 로 임베딩됨을 보이고 m이 홀수일 경우엔 연장율 1, 확장율 $2^n$로 임베딩됨을 보인다 ($1{\leq}n{\leq}m$).

• 수산해양기술연구
• /
• 제48권1호
• /
• pp.10-19
• /
• 2012

The mesh selectivity of a drift net for yellow croaker (Larimichthys polyactis) was examined in field experiments with six different net mesh size (40, 45, 50, 55, 60 and 65mm) from April to December, 2008 in the coastal areas of Jeollanam-do in Korea. The total catch of 6,748 consisted of yellow croaker (n=6,310; 89.1% of total catch), common mackerel (n=158; 5.6%) and other species (n=280; 9.6%). The selectivity curve for yellow croaker was fit by the models of selectivity curve in SELECT method. The optimal mesh size for 50% retention for minimum landing size (191mm) of yellow croaker was estimated as 49.6mm-51mm by selectivity curves. And the bi-normal model for the selectivity curve was found to fit the data best.

• 한국연초학회지
• /
• 제26권2호
• /
• pp.126-134
• /
• 2004

Tobacco dust samples were collected for two times in primary and secondary process at 4 cigarette manufacturing factories(Shintanzin, Youngju, Wonju, Kwangju) and analyzed to evaluate usage as a raw material in production of reconstituted tobacco. The chemical constituents and HWS of tobacco dust were analyzed. Tobacco dust samples were partitioned by particle size using a series of screens ranging from 20 to 200 mesh. The amount of material retained in each fraction was quantified and sand content was also determined. Appreciable average amounts$(40-65\%)$ material at 4 locations were found to be larger than 60 mesh. Although the amount of material in each fraction increased to a maximum at 100 mesh and then decreased, the $\%$ sand continually increased with decreasing particle size. The chemical constituents and HWS content of tobacco dust have similar values in secondary process of 4 cigarette manufacturing factories but the those of primary process have different values according to the site of occurrence and manufacturing factories.

• 수산해양기술연구
• /
• 제51권2호
• /
• pp.171-178
• /
• 2015

Selectivity and by-catch are the main features used to define fish catch for fisheries management or to determine fishing gear efficiency. A fish girth distribution analysis was carried out to determine the retention rate of juveniles discarded and to establish common selectivity for a multispecies catch. Total body length, body weight, and girth of juvenile fish retained in the cod-end and cover net separately were collected using an 18-mm mesh cover net during 12 fishing trials with a 41-mm cod-end beam trawl. The by-catch weight ratio in the cod-end was twice that of the by-catch ratio in number. The 50% selectivity of body length and 50% girth of redfin velvet fish were not significantly different between the cod-end and cover net, whereas those of other fish species were significantly different between the cod-end and cover net. The difference in 50% selectivity girth of other fish between the cod-end and cover net was similar between cod-end mesh size and cover net mesh size. Furthermore, the difference in 50% body length selectivity of other fish between the cod-end and cover net was almost double the difference in girth. Girth selectivity in a multispecies catch using towed fishing gear was effectively used to determine fish and net mesh size.