• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.2
• /
• pp.293-303
• /
• 2002

Recently, the use of the high strength materials and development of construction techniques have resulted in more flexible and longer spanning in the stadium systems. So the natural frequency of stadium structures are became low. Stadium stand could be led to significant dynamic response as like resonance due to spectator rhythmical activities. The accurate analysis of dynamic behavior of stadium systems and the precise investigation of the dynamic loads on stadium structures are demanded for effective design. It is desirable to apply measured dynamic loads created by spectator activities because these dynamic loads are not easy to express numerical formula. As the floor mesh of stadium stand is refined, the number of divided elements increases in numerical analysis. the rise of the number of elements makes the numbers of nodal points increased and numerous computer memory required. So it is difficult to analysis refine full model of stadium structures by using the commercial programs. In this study, the various dynamic loads induced by spectator movements are measured and analyzed. And a new modeling method that reduce the nodal points are introduced. Vibration analysis of stadium stands is executed to inspect accuracy and efficiency of proposed method in this paper.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.5
• /
• pp.217-228
• /
• 1999

The three methods of analysis (i) REV(representative elemental volume), (ii) non-REV and (iii) joint network analysis are introduced in this paper to analyze the groundwater flow in jointed rock mass and the inflow into underground excavations. The results from those methods are compared one another to reveal their characteristics by varying the number of joints and the diameter of the opening. The pre-processor, the so-called sequential analysis, is introduced to predict the equivalent hydraulic conductivity of a jointed rock mass having a number of intersecting joints. Using the finite element mesh, joint map and sequential analysis, the equivalent hydraulic conductivities are calculated for all 445 elements. The hydraulic inhomogeneity and the determination of the representative properties of jointed rock masses are discussed. In the REV analysis where the entire rock mass is homogenized through the representative properties, the inflow is increased regularly and consistently by increasing the joint density, the opening size and the conductivity contrast value. Though the non-REV analysis showed irregular variation of the inflow due to the local inhomogeneity allowed to individual elements, the inflow approached the REV results as the characteristic length increases. The joint network analysis showed the most sensitive reaction to the joint density, the opening size and the presence of the network crossing the opening. The reliability of the network analysis depends on the geometric data of individual joints. In view of the limited field data on joint geometry and possible uncertainty the REV and non-REV methods are considered more practical and rational than the joint network analysis.

• Journal of Korea Foundry Society
• /
• v.43 no.6
• /
• pp.302-309
• /
• 2023

In general, castings often have complex shapes and significant variations in thickness within a single product, making grid generation for simulations challenging. Casting flows involve multiphase flows, requiring the tracking of the boundary between air and molten metal. Additionally, considerable time is spent calculating pressure fields due to density differences in a numerical analysis. For these reasons, the Cartesian grid system has traditionally been used in mold filling simulations. However, orthogonal grids fail to represent shapes accurately, leading to a momentum loss caused by the stair-like grid patterns on curved and sloped surfaces. This can alter the flow of molten metals and result in incorrect casting process designs. To address this issue, simulations in the Cartesian grid system involve creating a large number of grids to represent shapes more accurately. Alternatively, the Cut Cell method can be applied to address the problems arising from the Cartesian grid system. In this study, analysis results based on the number of grid in the Cartesian grid system for a casting flow analysis were compared with results obtained using the Cut Cell method. Casting flow simulations of actual products during various casting processes were also conducted, and these results were analyzed with and without applying the Cut Cell method.

• Korean Journal of Weed Science
• /
• v.13 no.2
• /
• pp.104-113
• /
• 1993

The experiment was conducted in 1992 to find out the approach to the development of prediction model of weed population in paddy fields. The weed seeds of 88% over were separated from the soil by using $K_2CO_3$ 50% solution with specific gravity 1.34. The weed seeds which were floated on the solution due to the difference of specific gravity between soil particles and the seeds were effectively withdrawn by using a vaccum pump attached with an aspirator. The seeds withdrawn together with solution were taken by filtering with a nylon net of $0.31{\times}0.16mm$ mesh. The pressing method was more efficient and practical for the viability test of weed seeds separated from the soil compared with the germination test and the TTC test. For the prediction of weed population by the number of weed seedlings emerged at the sampled soil, the sampling method of 0-10cm deep at 5-6 sites per field was applicable. At the prediction method by the number of seedlings emerged, the smaller the seed sizes, the lower the prediction coefficients of weed species. It was considered that the prediction method by the number of seedlings emerged was more practical than the prediction method by the number of seeds separated from sampled soil, in relation to similarities to weed population, time and expenses required for examining, technical difficulties and applicability of weed species.

• Korean journal of applied entomology
• /
• v.59 no.4
• /
• pp.295-301
• /
• 2020

In this study, we aimed to investigate the changes in the catch rate of Monochamus saltuarius, based on sexual maturation by using aggregation-sex pheromone traps. Ovariole development of caught M. saltuarius females was compared to that of the ones not caught using traps. In a mesh cage set up at the Hongneung experimental forest, we placed a multi-funnel trap with or without an aggregation-sex pheromone lure. M. saltuarius adults, which emerged from pine logs, were grouped in four according to the emergence dates (0, 1, 7, and 10 days after emergence [DAE]). We released beetles into the mesh cage to investigate the catch rate using the traps. In each group, a total of 80 beetles (20 beetles × 4 replications) were tested, making it a total of 320 beetles. Among the four groups, M. saltuarius adults in the 7 DAE group were caught more frequently using the traps, especially with a pheromone lure; the other groups showed a low catch rate. A similar number of female and male beetles were caught using the traps. Regarding ovariole development, all the female adults in the 0 and 1 DAE groups were immature, while those in the other two groups were completely developed. Therefore, aggregation-sex pheromone traps might have a limitation in the prevention of pine wilt disease because of the transmission of pine wood nematode during maturation feeding of newly emerged M. saltuarius adults. However, aggregation-sex pheromone traps can be effective for collecting sexually mature M. saltuarius adults, for the investigation of seasonal occurrence of beetles in forests.

• Resources Recycling
• /
• v.32 no.1
• /
• pp.42-49
• /
• 2023

The glass ceramic secondary resource containing Li-Al-Si is used in inductor, fireproof glass, and transparent cookware and accounts for 14% of the total consumption of Li, which is the second most widely used after Li-ion batteries. Therefore, new Li resources should be explored when the demand for Li is exploding, and extensive research on Li recovery is needed. Herein, we recovered Li from fireproof Li-Al-Si glass ceramic, which is a new secondary resource containing Li. The fireproof glass among all Li-Al-Si glass ceramics was used as raw material that contained 1.5% Li, 9.4% Al, and 28.9% Si. The process for recovering Li from the fireproof glass was divided into two parts: (1) calcium salt roasting and (2) water leaching. In calcium salt roasting, a sample of fireproof glass was crushed and ground below 325 mesh. The leaching efficiency was compared based on the presence or absence of heat treatment of the fireproof glass. Moreover, the leaching rates based on the input ratios of calcium salt, Li-Al-Si glass, and ceramics and the leaching process based on calcium salt roasting temperatures were compared. In water leaching, the leaching and recovery rates of Li based on different temperatures, times, solid-liquid ratios, and number of continuous leaching stages were compared. The results revealed that fireproof glass ceramics containing Li-Al-Si should be heat treated to change phase to beta-type spodumene. CaCO₃ salt should be added at a ratio of 6:1 with glass ceramics containing Li-Al-Si, and then leached 4 times or more to achieve a recovery efficiency of Li over 98% from a solution containing 200 mg/L of Li.

• The Journal of Fisheries Business Administration
• /
• v.15 no.1
• /
• pp.131-153
• /
• 1984

Fishery resources are still abundant compared with other resources and the possibility of exploitation is probably great. The Korean fishery industry has grown remarkably since 1957, and Korea is ranked as one of the major fishery countries. Its of fishery products reached the 9th in the world and the value of exports was 5th in 1982. But recently a growth rate has slowed down, due to the enlargement of territorial seas by the declaration of the 200 mile, Exclusive Economic Zone, the tendency to develop fishery resources strate-gically in international bargaining, the change in function of the international organizations, the expansion of regulated waters, the illegal arrest of our fishing boats, the rapid rise in oil prices, and the fall in fish prices, the development of fishery resources as a symbol of nationalism, the fishing boats decreptitude, the rise of crew wages, regulations on fishing methods, fish species, fishing season, size of fish, and mesh size, fishing quotas and the demand of excessive fishing royalties. Besides the the obligation of coastal countries, employing crews of their host countries is also an example of the change in the international environment which causes the aggravation of foreign profit of fishing firms. To ameliorate the situation, our Korean fishery firms must prepare efficient plans and study systematically to internationalize themselves because such existing methods as conventional fishing entry and licence fishing entry are likely to be unable to cope with international environmental change. Thus, after the systematic analysis of the problem, some new combined alternatives might be proposed. These are some of the new schemes to support this plan showing the orientation of our national policy: 1. Most of the coastal states, to cope with rapid international environmental change and to survive in the new era of ocean order, have rationalized their higher governmental structure concerning the fishery industries. And the coastal countries which are the objectives of our expecting entry, demand excessive economic and technical aid, limit the number of fishing boats’entry and the use of our foreign fishing bases, and regulate the membership of the international fishery commissions. Especially, most of the coastal or island countries are recently independent states, which are poorer in national budget, depend largely on fishing royalties and licence entry fees as their main resources of national finance. 2. Alternatives to our entry to deep sea fishing, as internationalization strategies, are by direct foreign investment method. About 30 firms have already invested approximately US $ 8 million in 9 coastal countries. Areas of investment comprise the southern part of the Atlantic Ocean, the Moroccan sea and five other sea areas. Trawling, tuna purse seining and five other fields are covered by the investment. Joint-venture is the most prominent method of this direct investment. If we consider the number of entry firms, the host countries, the number of seas available and the size of investment, this method of cooperation is perhaps insufficient so far. Our fishery firms suffer from a weakness in international competitive ability, an insufficiency of information, of short funds, incompetency in the market, the unfriendliness of host coastal countries, the incapability of partners in joint-ventures and the political instability of the host countries. To enlarge our foreign fishing grounds, we are to actively adopt the direct investment entry method and to diversity our collaboraboration with partner countries. Consequently, besides proper fishing, we might utilize forward integration strategies, including the processing fied. a. The enterprise emigration method is likely to be successful in Argentina. It includes the development of Argentinian fishing grounds which are still not exploited in spite of abundant resources. Besides, Arentina could also be developed as a base for the exploitation of the krill resources and for further entries into collaboration with other Latin American countries. b. The co-business contract fishing method works in American territorial seas where American fishermen sell their fishery products to our factory ships at sea. This method contributes greatly to obtaining more fishing quotas and in innovation bottom fishing operation. Therefore we may apply this method to other countres to diffuse our foreign fishing entry. c. The new fishing ground development method was begun in 1957 by tuna long-line experimental fishing in the Indian Ocean. It has five fields, trawling, skipjack pole fishing and shrimp trawling, and so on. Recently, Korean fisheries were successful in the development of the Antarctic Ocean krill and tuna purse seining. 3. The acceleration of the internationalization of deep sea fishing; a. Intense information exchange activities and commission participation are likely to be continues as our contributions to the international fishery organizations. We should try to enter international fishery commissions in which we are not so far participating. And we have to reform adequately to meet the changes of the function of the international commissions. With our partner countries, we ought to conclude bilateral fishery agreements, thus enlarging our collaboration. b. Our government should offer economic and technical aids to host countries to facilitate our firms’fishery entry and activities. c. To accelerate technical innovation, our fishery firms must invest greater amount in technical innovation, at the same time be more discriminatory in importing exogeneous fishery technologies. As for fishing methods; expanded use of multi-purpose fishing boats and introduction of automation should be encuraged to prevent seasonal fluctuations in fishery outputs. d. The government should increases financial and tax aid to Korean firms in order to elevate already weak financial structure of Korean fishery firms. e. Finally, the government ought to revise foreign exchange regulations being applied to deep sea fishery firms. Furthermore, dutes levied on foreign purchaed equipments and supplies used by our deep sea fishing boats thould be reduced or exempted. when the fish caught by Korean partner of joint-venture firms is sold at the home port, pusan, import duty should be exempted.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.9
• /
• pp.2221-2234
• /
• 1997

Distributed mutual exclusion algorithms have employed two approaches to achieve mutual exclusion and can be divided into two broad classes:token-based and permission-based. Token-based algorithms share a unique token among the nodes and a node is allowed to access its common resources if it possesses the token. Permission-based algorithms require one or more successive rounds of message exchanges among the nodes to obtain the permission to access the common resources. A hypercube architecture has earned wide acceptance in multiprocessor systems in the past few years because of its simple, yet rich topology. Accordingly, we study distributed permission-based mutual exclusion algorithms for hypercubes, and design a distributed permission-based mutual exclusion algorithm based on a new information structure adapted to the hypercubes. The new information structure is a request set of T-pattern from a logical mesh that is embedded into a hypercube. If a node wants to access the common resources, it sends request message to all nodes in the request set by Lan's multicast algorithm. Once the node receives a grant message from all nodes in the request set, it accesses the common resource. We evaluate our algorithm with respect to minimum round-trip delay, blocking delay, and the number of messages per access to the common resource.

• Journal of Korea Water Resources Association
• /
• v.53 no.1
• /
• pp.1-13
• /
• 2020

The most common approach for computing engineering flow problems at high Reynolds number is still the Reynolds-averaged Navier-Stokes (RANS) computations based on turbulence models with wall functions. The recently developed generalized wall functions blending between the wall-limiting viscous and the outer logarithmic relations ensure a smooth transition of flow quantities across two regions. The performances and convergence properties of widely used turbulence models with wall functions that are applicable for turbulence kinetic energy (TKE), turbulent and specific dissipation rates, and eddy viscosity are presented through a series of near wall flow simulations. The present results show that RNG k-𝜖 model should be carefully applied with small tolerance to get the stable solution when the first grid lies in the buffer layer. The standard k-𝜖 and RNG k-𝜖 models are not sensitive to the selection of wall functions for both TKE and eddy viscosity, while the k-ω SST model should be applied together with kL-wall function for TKE and nutUB-wall functions for eddy viscosity to ensure accurate and stable boundary conditions. The applications to a backward-facing step flow at Re=155,000 reveal that the reattachment length is reasonably well predicted on appropriately refined mesh by all turbulence models, except the standard k-𝜖 model which about 13% underestimates the reattachment length regardless of the grid refinement.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.5
• /
• pp.533-541
• /
• 2007

The Zienkiewicz-Zhu(Z/Z) error estimate is slightly modified for the hierarchical p-refinement, and is then applied to L-shaped plates subjected to bending to demonstrate its effectiveness. An adaptive procedure in finite element analysis is presented by p-refinement of meshes in conjunction with a posteriori error estimator that is based on the superconvergent patch recovery(SPR) technique. The modified Z/Z error estimate p-refinement is different from the conventional approach because the high order shape functions based on integrals of Legendre polynomials are used to interpolate displacements within an element, on the other hand, the same order of basis function based on Pascal's triangle tree is also used to interpolate recovered stresses. The least-square method is used to fit a polynomial to the stresses computed at the sampling points. The strategy of finding a nearly optimal distribution of polynomial degrees on a fixed finite element mesh is discussed such that a particular element has to be refined automatically to obtain an acceptable level of accuracy by increasing p-levels non-uniformly or selectively. It is noted that the error decreases rapidly with an increase in the number of degrees of freedom and the sequences of p-distributions obtained by the proposed error indicator closely follow the optimal trajectory.