• 한국정밀공학회지
• /
• 제12권2호
• /
• pp.162-172
• /
• 1995

In this paper new mesh generation method is proposed for crack propagation analysis based on the finite element method. The main tool of the method is the Delaunay Triangulation, Transfinete element mapping, and it allows the setting of the arbitrary crack-growth increment and the arbitrary crack direction. It has the form of a subroutine, and it is easily introduced as a subroutine for any mesh generation method which is based on the blocking method.

• 한국CDE학회논문집
• /
• 제1권3호
• /
• pp.189-202
• /
• 1996

Complex geometric shapes can be defined simply and efficiently by combining and operating various surface primitives. These primitives and their intersection curves are used in finite element mesh generation to form an easy and intuitive procedure for finite element modelling of curved surfaces. This paper proposes techniques of automatic mesh generation on surface primitives with arbitrarily shaped boundaries and control curves, which may be created by surface to surface intersection. A method of automatic mesh generation on plane, which was previously developed by the author, has been modified for application to the surface mesh generation. Owing to the mesh generation-wise differences between planes and surfaces, the surfaces should be transformed into conceptual plane so that the modified plane mesh generation method can be applied. Surface development, mapping and mesh reconstruction are the key techniques suggested in this paper. The selection of the technique to apply can be determined automatically on the basis of the developability, existence of singularity and other characteristics of the surfaces on which the mesh is to be generated. The suggested techniques were implemented into parts of mesh generation functions of the finite element software, MacTran. Their validity and practicality were manifested by the actual use of this software.

• 한국철도학회논문집
• /
• 제2권3호
• /
• pp.46-53
• /
• 1999

In this paper, made was a study on a mesh generation method based on the pollution error. This method is designed for the control of the pollution error in any patch of elements of interest. It is a well-known fact that the pollution error estimates are much more than the local one. When the pollution error is significant, nothing can be said about the reliability of any estimator based on local computations in the patch. Reliable a posteriori error estimation is possible by controlling the pollution error in the patch through proper design of the mesh outside the patch. This design is possible by equally distributing the pollution error indicators over the mesh outside the patch. The mesh generated from the conventional feedback pollution-adaptive mesh generation algorithm needs many iterations. Therefore, the solution time is significant. But the remeshing scheme in the proposed method was used here. It was shown that the pollution-adaptive mesh improves the E.I., simply denoted as Effectivity Index, on the patch of interest, and the pollution error reduces less than the local error.

• 한국CDE학회논문집
• /
• 제11권2호
• /
• pp.138-147
• /
• 2006

A systematic approach to tetrahedral element or mesh generation, based on an advancing-front method and an optimal triangular mesh generation technique on the surface, is presented in this paper. The possible internal nodes are obtained by the octree-decomposition scheme. The initial tetrahedral mesh system is constructed by the advancing-front method and then it is improved by the quality improvement processes including mesh swapping and nodal smoothing. The approach is evaluated by investigating the normalized length, the normalized volume, the dihedral angle and the normalized quality

• 한국항만학회지
• /
• 제14권1호
• /
• pp.97-105
• /
• 2000

This paper presents an automatic mesh generation considering water depth, which is based on the depth interpolation. The key feature of this method is that the position of a mesh on any depth in the shallow water area can be generated. The Examples are carried out, and the results are shown to be good. This method is shown to be a useful and powerful tool for the flow calculation for the seabed topography.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2006년도 추계 학술대회논문집
• /
• pp.70-73
• /
• 2006

Mesh generation for the region of interest is prerequisite for numerical analysis of governing partial differential equations describing phenomena with proper physic. Mesh generation is, however, usually considered as a major obstacle for a routine application of numerical approaches in Engineering applications. Therefore automatic mesh generation is highly pursued. In this paper automated quadrilateral surface mesh generation is proposed. According to the present method, Cartesian cells of proper resolution for a region bounding the whole region of interest are first generated and the interior cells are identified. Then projecting their surface meshes onto the boundary surfaces gives surface mesh consisting of quadrilateral cells. This method has been implemented as an application program, and example cases are given.

• 한국CDE학회논문집
• /
• 제8권4호
• /
• pp.270-277
• /
• 2003

In two dimensional mechanical design analysis, quadrilateral element mesh is preferred because it provides more accurate result than triangular element mesh. However, automation of quadrilateral element mesh generation is much more complex because of its geometrical complexities. In this study, an automatic quadrilateral element mesh generation algorithm based on the boundary normal offsetting method and the boundary decomposition method is developed. In so doing, nodes are automatically placed using the boundary normal offsetting method and the decomposition method is applied to decompose the designed domain into a set of convex subdomains. The generated elements are improved by relocation of the existing nodes based on the four criteria - uniformity, aspect ratio, skewness and taper degree. The developed algorithm requires minimal user inputs such as boundary data and the distance between nodes.

• Structural Engineering and Mechanics
• /
• 제15권1호
• /
• pp.135-149
• /
• 2003

The bubble packing method is implemented for adaptive mesh generation in two and three dimensions. Bubbles on the boundary of a three-dimensional domain are controlled independently of the interior bubbles in the domain, and a modified octree technique is employed to place initial bubbles in the three-dimensional zone. Numerical comparisons are made with other mesh generation techniques to demonstrate the effectiveness of the present bubble packing scheme for two- and three-dimensional domains. It is shown that this bubble packing method provides a high quality of mesh and affordable control of mesh density as well.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 추계학술대회논문집
• /
• pp.71-76
• /
• 2009

The research to predict the resistance performance of the ship using the CFD analysis is increasing. For the CFD numerical analysis the computational mesh, which is proper to computational model, has to be made before the analysis is begun. In the parametric study, even though the deformation of each case is not very sharp, the whole computational mesh should be regenerated according to the conventional way. Hence, lots of effort is needed to repeated mesh generation work. To solve these problems, the automatic mesh generation method using the macro function of commercial CAD program and mesh generation program is introduced in this study. First, in the CAD program, by using the macro function and putting the deformation rate of bow and stern in lengthwise, the repeated modeling work is performed automatically. Next, the generated geometries are read by the mesh generation program and the proper mesh for the geometry is created automatically also using the macro function. The hybrid mesh which has unstructured grid near the bow and stern and structured grid in the remaining part of domain is used. The verification of the developed method is done by applying the method to predict the resistance performance of the podded propulsion cruise ship of the Daewoo Shipbuilding & Marine Engineering (DSME) in the cases of different length of bow and stern and pod set in different position. The author believes that the introduced method can help to make the database to optimize the resistance performance of the ship in various cases can be constructed without difficulty.

• International Journal of CAD/CAM
• /
• 제6권1호
• /
• pp.73-79
• /
• 2006

In this paper, we propose a new triangular finite element mesh generation method based on simplification of high-density mesh and adaptive Level-of-Detail (LOD) methods for efficient CAE. In our method, mesh simplification is used to control the mesh properties required for FE mesh, such as the number of triangular elements, element shape quality and size while keeping the specified approximation tolerance. Adaptive LOD methods based on vertex hierarchy according to curvature and region of interest, and global LOD method preserving density distributions are also proposed in order to construct a mesh more appropriate for CAE purpose. These methods enable efficient generation of FE meshes with properties appropriate for analysis purpose from a high-density mesh. Finally, the effectiveness of our approach is shown through evaluations of the FE meshes for practical use.