• 한국터널지하공간학회 논문집
• /
• 제4권1호
• /
• pp.3-12
• /
• 2002

본 연구는 우면산터널 시공에 따른 예술의 전당내의 오페라극장 구조물에 대한 영향을 검토하고 필요시에는 적절한 대책을 조기에 강구하기 위하여 3차원 유한요소해석을 실시하였다. 쌍굴터널 굴진시 지반거동의 영향범위내에 있는 오페라극장은 문화재급의 건축물로써 그 기초형식 또한 다양하다. 그러므로, 건물구조의 3차원적인 특성과 기초형태의 변화를 이상적으로 모델링하고, 3차원해석 결과에 따른 시공전 예측과 시공중 안정성확인을 평가할 수 있도록 검토하였다. 문제발생시 신속한 대처를 할 수 있고, 터널굴진시 정보화 시공이 적용될 수 있도록 관리기준치를 단계적으로 변화 설정하였다.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2012년도 제46차 하계학술발표논문집 20권2호
• /
• pp.429-432
• /
• 2012

이 논문에서는 쓰레기 매립의 표준화를 위한 일환으로 쓰레기 체적을 주기적으로 계산하는 알고리즘을 제시하였다. 안전하고 쾌적한 도시 환경을 조성하기 위해 폐기물 매립 시설은 필요하며 폐기물 부피 관리의 신뢰성 및 용량 정보의 정확성을 파악하는 것이 필요하다. 카메라 캘리브레이션 이후에 대상체의 표면에 대한 포인트 클라우드(point cloud)를 얻을 수 있었으며 이것을 물체의 체적 계산 알고리즘의 입력으로 선택하였다. 비균일 격자(uniformmeshing) 방법에 기초한 체적 계산 알고리즘을 제안하였으며 알고리즘의 타당성을 시뮬레이션과 실제 실험을 통해 입증하였다. 제시된 알고리즘은 쓰레기 매립의 체적 계산 뿐 만이 아니라 삼차원 객체의 일반적인 체적 계산을 위한 알고리즘으로도 사용될 수 있다.

• Wind and Structures
• /
• 제17권3호
• /
• pp.263-274
• /
• 2013

A numerical technique for fluid-structure interaction, which is based on the finite element method (FEM) and computational fluid dynamics (CFD), was developed for application to an industrial chimney equipped with a pendulum tuned mass damper (TMD). In order to solve the structural problem, a one-dimensional beam model (Navier-Bernoulli) was considered and, for the dynamical problem, the standard second-order Newmark method was used. Navier-Stokes equations for incompressible flow are solved in several horizontal planes to determine the pressure in the boundary of the corresponding cross-section of the chimney. Forces per unit length were obtained by integrating the pressure and are introduced in the structure using standard FEM interpolation techniques. For the fluid problem, a fractional step scheme based on a second order pressure splitting has been used. In each fluid plane, the displacements have been taken into account considering an Arbitrary Lagrangian Eulerian approach. The stabilization of convection and diffusion terms is achieved by means of quasi-static orthogonal subscales. For each period of time, the fluid problem was solved and the geometry of the mesh of each fluid plane is updated according to the structure displacements. Using this technique, along-wind and across-wind effects have been properly explained. The method was applied to an industrial chimney in three scenarios (with or without TMD and for different damping values) and for two wind speeds, showing different responses.

• Corrosion Science and Technology
• /
• 제17권6호
• /
• pp.272-278
• /
• 2018

Reinforced concrete (RC) has been used as a construction material in various environments, such as airports, bridges, and ocean concrete structures, etc. Over time, however, rebar in the concrete is prone to corrosion from environmental forces and structural defects of the concrete. Cathodic protection (CP) was invented to prevent problems with corrosion and is widely used for different applications. Cathodic protection is divided into two types: sacrificial anode cathodic protection (SACP) and impressed current cathodic protection (ICCP). There are several limitations to the use of sacrificial anode cathodic protection in complex reinforced concrete structures, including concrete resistivity, throwing power of the CP, and environmental conditions. These limitations can affect the protection performance of SACP. Therefore, we used impressed current cathodic protection in our study. We tested Ti-Mesh, Ti-Rod, and Ti-Ribbon anodes in slab type reinforced concrete specimens. Electrochemical tests were conducted to confirm the impressed current cathodic protection performance under different environmental conditions.

• 대한건축학회논문집:구조계
• /
• 제34권11호
• /
• pp.3-10
• /
• 2018

Cladding that finishes the exterior of a building could enhance the value of the building, and shape control is an important factor. With the recent development of 3D printing, cementitious claddings were printed by 3D printer in China, U.S.A and elsewhere. On the other hand, the structural safety of the exterior panel should be examined, as casualties occur when the exterior panel fails due to typhoon or impact. Cement-based cladding is reinforced by wire mesh to improve safety. Introducing 3D printing composite system with polymer and cement, makes it possible to produce claddings fast and accurate. Prior to the development of 3D printing cementitious cladding, the major parameters influencing the optimal shape were identified based on structural performance. The wind load, joint, and bond behavior between polymer and cement were considered. Polymer laminate shape, order, and thickness were variables, and finite element analysis was performed.

• 한국공간구조학회논문집
• /
• 제22권1호
• /
• pp.41-49
• /
• 2022

In the case of columns in buildings with soft story, the concentration of stress due to the difference in stiffness can damage the columns. The irregularity of buildings including soft story requires retrofit because combined load of compression, bending, shear, and torsion acts on the structure. Concrete jacketing is advantageous in securing the strength and stiffness of existing members. However, the brittleness of concrete make it difficult to secure ductility to resist the large deformation, and the complicated construction process for integrity between the existing member and extended section reduces the constructability. In this study, two types of Steel Grid Reinforcement (SGR), which are Steel Wire Mesh (SWM) for integrity and Steel Fiber Non-Shrinkage Mortar (SFNM) for crack resistance are proposed. One reinforced concrete (RC) column with non-seismic details and two columns retrofitted with each different types of proposed method were manufactured. Seismic performance was analyzed for cyclic loading test in which a combined load of compression, bending, shear, and torsion was applied. As a result of the experiment, specimens retrofitted with proposed concrete jacketing method showed 862% of maximum load, 188% of maximum displacement and 1,324% of stiffness compared to non-retrofitted specimen.

• 드라이브 ㆍ 컨트롤
• /
• 제20권4호
• /
• pp.45-53
• /
• 2023

This study optimized the parameters of the helical gear based on the original external meshing helical gear pump, combined with the analysis of the stability and flow of the basic parameters of the equipment; herringbone gears were used to eliminate the axial force generated by the helical gears. An optimized helical gear rotor was built with NX. The error between the simulation and calculation results of pump displacement was 3.95% and the simulation results were valid. Analysis of the outlet pressure and lift changes (maximum change rates of 0.38% and 0.25%), pressure analysis of the XY center plane at different times in the same cycle (no pressure surge or drop), and analysis of the axial force of the primary and driven rotors (axis The axial force is close to 0) were performed. The results showed that the flow pulsation of the external gear pump was slight, the operation was smooth, vibration and friction were reduced, the wear of bearings and other components could be diminished, and the service life of the equipment was extended. The simulation results showed that the external gear pump met the design requirements.

• 한국인터넷방송통신학회논문지
• /
• 제23권6호
• /
• pp.69-74
• /
• 2023

이 논문에서는 일차원과 이차원에서 불규칙한 점 집합에서의 웨이브렛을 구현하고 분석하는 기법이 기술되었다. 특히 우리는 부분할 방법과 계산에 집중하였다. 부분할은 선과 망사를 연속적인 분할 동작의 부드러운 곡선이나 곡선의 표면으로 간략화시키는 기법을 의미한다. 웨이브렛 구조를 특이한 환경에 일반화시키는 열쇠는 일반화된 부분할을 사용하는 것이다. 첫 번째 일반화 구조는 이미 부분할과 연결되었는데 그것은 이차 일반화 웨이브렛 구현에 보다 더 중요하게 되었다. 부분할 구조는 빠른 알고리즘을 제공하여주고, 자연적인 다해상도 구조를 만들어 주어 우리가 추구하려는 기본의 스케일 함수와 웨이브렛을 제공하여 준다.

• 터널과지하공간
• /
• 제23권5호
• /
• pp.413-427
• /
• 2013

폴리머 계열의 박층 라이너는 양호한 암반 조건에서 숏크리트와 철망을 대체할 수 있는 새로운 지보재로 고려되고 있으며, 1990년대부터 광산의 안정성 확보를 위해 사용되고 있다. 하지만 TSL의 지보 성능을 평가하기 위한 TSL의 특성에 대한 실험적 연구가 부족한 실정이다. 본 연구에서는 구성 성분이 다른 두 가지 TSL 재료에 대해 재령 7일에 인장강도와 부착강도를 측정하였고, EFNARC(2008)에서 제시하고 있는 지지력 평가 시험도 함께 실시하였다. 시험결과, 폴리머 함량이 높아질수록 재료의 인장강도는 높아지나 상대적으로 부착강도는 작아지는 것으로 나타났다. 특히, 폴리머 함량은 상대적으로 작지만 시멘트계 성분이 포함된 TSL 재료의 경우에는 경화가 빠르기 때문에 부착파괴에 대한 저항성이 높게 나타났다. 이상과 같이 폴리머 함량에 따라 TSL의 성능이 상이하게 나타남을 확인할 수 있었다.

• 수산해양기술연구
• /
• 제22권4호
• /
• pp.61-70
• /
• 1986

In accordance with a rapid growth of demani on aquatic animals, researches of the unused fishery resources On the deep sea b~d in the Korean Waters has been and will be required. The authors carried out a series of fishing experiments to investigate the available resources and to find the effective fishing method on the deep sea bed of the Korean East Sea. In the experiments, 19 kinds of traps which are different from each other in shape, mesh size and entrance diameter were used. The fishing experiments w~r;; carried out in four areas of 20Dm, 600.'11, 800m and 1000.'11 deep respectively, by the Pusan 402 (30:) GT) and the Pusan 403 (279GT), the training ships of National Fisheries University of Pusan, during August, 1986. The catc~ were analyzed with the size, the depth and the construction of traps. The results obtained can be summarized as follows: 1. Main species of the catch w~re pink shrimp, Pandalus bolelis, a kind of welks, Buccimum striatissimum and a kind of larg~ crabs. Chiono8cetes japonicus and the another species were few. 2. The CPUE value (expressed by the number of catch per trap in this paper) of pink shrimp was the highest in the depth of 20J-n around, and the value in the depth of 600.'11 or more decreased gradually with an increase of the depth. But, the value of Buccimum straitissimum was much higher in the depth of 6:J:)!1I or more than that in the depth of 200m around. On the other hand, the value of Chion:Jecetes japonjcus was very low in general. 3. The iniividual body size of the catch differed with the depth. Pink shrimps caught in the depth of 200m around were smaller than those in the depth of 600.'11 or more. In contrast with this, Baccimum striatissim:t.m caught in the depth of 200m around were larger than those in the depth of 600.'11 or more. 4. Depending on the selection curve in Ishida's method for the mesh size of trap webbing, the carapace length of pink shrimp and the shell length of Buccimum striatissimum which are equivalent to 100% relative catching efficiency can be estimated about 3.5cm and 6.5cm or so respectively. 5. The number of catch of pink shrimp and Buccimum striatissimum by the 60.'1'1.'11 entrance diameter of trap were less than that by the 90mm, 120mm and 150mm, even thogh the diffierence am~r, g 9:Jmm, 120.'11.'11 and 150:1'.'11 are not so large.