• 한국가시화정보학회지
• /
• 제9권3호
• /
• pp.38-43
• /
• 2011

When draining takes place through an axially located drain port in a cylindrical tank without any prevent, a vortex with an air core occurs. In this study, semi spherical concave and convex meshes with different size inner hole are used to find the air core can suppress. The study is carried out with different values of inner hole of mesh and different install direction of semi spherical mesh using PIV and measured velocity distribution. By providing a mesh, the air core can be prevented, even if the ratio of inner hole of mesh and diameter of cylinder is around 0.66. The experimental results show that a convex mesh type is more effective to suppress the air core generation than a concave mesh type.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권4호
• /
• pp.174-181
• /
• 1999

To obtain more accurate result in the finite element analysis for electric machinery, it is important to have a mesh being of good quality. This paper describes a new technique of mesh generation for the finite element method. When the list of points defining the region of analysis is given, an appropriate distribution of interior points is generated first. Secondly the points are connected to from the trianlges. Finally the connectivity data are used to reposition the interior points using Laplacian smoothing and mesh relaxation technique. In this paper, a mesh searching technique of Lawson which modifies the start mesh is proposed in addition to the above three steps. This algorithm is simple and produces the meshes being of good quality with high speed in comparison with the existing one.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 ICEIC The International Conference on Electronics Informations and Communications
• /
• pp.137-142
• /
• 2004

In this paper, we propose a new scheme for geometry coding of three-dimensional (3-D) mesh models using a fixed spectral basis. In order to code the mesh geometry information, we generate a fixed spectral basis using the dual graph derived from the 3-D mesh topology. After we partition a 3-D mesh model into several independent sub-meshes to reduce coding complexity, the mesh geometry information is projected onto the generated orthonormal bases which are the eigenvectors of the Laplacian matrix of the 3-D mesh. Finally, spectral coefficients are coded by a quantizer and a variable length coder. The proposed scheme can not only overcome difficulty of generating a fixed spectral basis, but also reduce coding complexity. Moreover, we can provide an efficient multi-resolution representation of 3-D meshes.

• Structural Engineering and Mechanics
• /
• 제75권6호
• /
• pp.685-699
• /
• 2020

Polygonal finite element provides a great flexibility in mesh generation of crack propagation problems where the topology of the domain changes significantly. However, the control of the discretization error in such problems is a main concern. In this paper, a polygonal-FEM is presented in modeling of crack propagation problems via an automatic adaptive mesh refinement procedure. The adaptive mesh refinement is accomplished based on the Zienkiewicz-Zhu error estimator in conjunction with a weighted SPR technique. Adaptive mesh refinement is employed in some steps for reduction of the discretization error and not for tracking the crack. In the steps that no adaptive mesh refinement is required, local modifications are applied on the mesh to prevent poor polygonal element shapes. Finally, several numerical examples are analyzed to demonstrate the efficiency, accuracy and robustness of the proposed computational algorithm in crack propagation problems.

• Earthquakes and Structures
• /
• 제16권3호
• /
• pp.253-263
• /
• 2019

The efficacy of a galvanized steel wire mesh (GSWM) as an alternative material for the rehabilitation of RC beam-column connections damaged due to reversed cyclic loading was investigated. The repair mainly uses epoxy resin infused under pressure into the damaged zone and then confined using three types of locally available GSWM mesh. The mesh types used herein are (a) Weave type square mesh with 2mm grid opening (GWSM-1) (b) Twisted wire mesh with hexagonal opening of 15 mm (GSWM-2) and (c) welded wire mesh with square opening of 25 mm (GSWM-3). A reduced scale RC beam-column connection detailed as per ductile detailing codes of Indian Standard was considered for the experimental investigation. The rehabilitated specimens were also subjected to similar cyclic displacement. Important parameters related to seismic capacity such as strength, stiffness degradation, energy dissipation, and ductility were evaluated. The rehabilitated connections exhibited equal or better performance and hence the adopted rehabilitation strategies could be considered as satisfactory. Confinement of damaged region using GSWM-1 significantly enhanced the seismic capacity of the connections.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2022년도 제65차 동계학술대회논문집 30권1호
• /
• pp.339-340
• /
• 2022

본 논문에서는 사용자의 다양한 물리적 속성 중 부드러운 헤비사이드 계단 함수와 다양한 물리적 속성(속도, 시점 등)을 활용하여 가중치 맵을 계산하고 이로부터 논플레이어 캐릭터(Non-player character, NPC)의 경로를 효율적으로 제어할 수 있는 NavMesh 제어 기법을 제시한다. 게임과 같은 가상환경에서 NPC는 일반적으로 네비게이션 메쉬(Navigation mesh, NavMesh)를 이용하여 이동한다. 하지만, NavMesh는 정적인 형태이기 때문에 사용자에 의해 디자인되어야 하고, 이러한 문제를 완화하고자 자동으로 NavMesh를 업데이트하는 기술이 연구되고 있지만, 메쉬 복원을 자동화할 뿐 실제 NPC 행동 제어라고 하기에는 힘든 접근법이다. 본 논문에서는 동적 네비게이션 프레임워크를 유지한 채, 사용자의 시점과 물리적 특성을 통해 NPC를 효율적이고 정확하게 경로 제어할 수 있는 방법을 제안하고, NavMesh의 형태에만 의존하던 NPC의 움직임을 완화하여 좀 더 사실적인 경로 제어를 보여준다.

• 구강회복응용과학지
• /
• 제29권4호
• /
• pp.327-336
• /
• 2013

본 연구에서는 두 종류의 유리 섬유 의치상 강화재인 Quarts Splint$^{TM}$Mesh와 SES MESH$^{(R)}$의 의치상 보강 효과와 열 순환이 의치상의 굽힘 강도와 강화재의 강화 효과에 미치는 영향을 알아보고자 하였다. 시편은 $2.5{\times}10.0{\times}65.0mm$ 크기로 강화재를 사용하지 않은 대조군, 금속 격자 강화재, Splint$^{TM}$Mesh, SES MESH$^{(R)}$로 보강한 시편을 각각 20개씩 제작하였으며 그 중 10개에는 열 순환을 시행하였다. 3점 굽힘 실험을 시행하여 의치상의 굽힘 강도를 측정하였다. Quarts Splint$^{TM}$Mesh와 SES MESH$^{(R)}$로 강화한 군은 대조군보다 유의하게 높은 굽힘 강도를 나타내었으며(P<.05), 금속 격자 강화재로 보강한 군보다 유의하게 낮은 굽힘 강도를 나타내었다(P<.05). 모든 군에서 열 순환을 시행한 경우가 열 순환을 시행하지 않은 경우에 비해 낮은 굽힘 강도를 나타내었지만 대조군에서만 유의한 차이를 나타내었다(P<.05).

• 수산해양기술연구
• /
• 제35권4호
• /
• pp.366-376
• /
• 1999

In order to examine the catching selectivity of the ark shell(Scapharca broughtonii) dredge, the various factors affecting the selective action of the dredge are analyzed, and the probabilities of the ark shell not shifting through the gaps between the teeth, and the mesh of the netting bag, are calculated for the various shell lengths, using the relation between the posture and the length when the shell passes through these parts.Considering that the probability of making catch is the product of the both probabilities described above, and that this probability is proportional to the relative catching efficiency, the selectivity curves for the ark shell dredge were estimated for various gaps between the teeth and for the various mesh sizes of the netting bag. The obtained results are summarized as follows :1. The ratios of the shell length of ark shell to the distance between teeth indicating the relative catching efficiency of 0%, 50, 100% respectively were 1.0, 1.26~1.28, 1.47~1.44, and that the selection ranges of selective shell length by the distance between teeth were 0.47~0.44, where the distances between teeth were 3.2cm, 3.6cm, 4.0cm, 4.4cm and 4.8cm. 2. The ratios of the shell length of ark shell to the mesh size indicating the relative catching efficiency of 0%, 50%, 100% respectively were 0.67, 0.84, 0.97 and that the selection range of shell length for catching, that in the range of selective shell length by the mesh size was 0.31, where the distance of 4.0cm between teeth, mesh size of 6.0 cm and the smaller mesh angle of $60^{\circ}$3. Where the distance between teeth is 4.0 cm and the smaller mesh angle is $60^{\circ}$, the selection range of shell length for catching of the ark shell dredge is decreased according to the mesh size, and it is minimized by 0.20 in the mesh size of 9.0~10.0 cm, but increased in the mesh size of over 11.0 cm. 4. Where the distance between teeth is 4.0 cm, the selective action by the mesh size of netting bag is begun with the mesh size of over 10.0 cm.

• 공업화학
• /
• 제2권3호
• /
• pp.209-215
• /
• 1991

n-헥산과 40 wt % p-TSA 수용액으로 이루어진 비혼화성 액상계에서 교반에 의한 유기상의 분산을 해석하였다. 사용된 교반기는 blade의 형태가 flat와 금망으로 된 4가지 형태의 6-bladed turbine 교반기를 사용하였다. 실험결과, 동일한 교반속도에서 유기상의 분산정도는 blade의 형태가 flat, 60 mesh, 40 mesh, 20 mesh의 순서로 감소하였고 계면활성제인 TBA의 농도가 증가할수록, 그리고 유기상의 부피비가 작을수록 유기상은 잘 분산되었다. 또한 완전분산에 필요한 최소교반속도는 flat, 60 mesh, 40 mesh, 20 mesh의 순서로 증가하였으나 최소소요동력은 거의 동일하였다. 이때 Power number와 Reynolds number와의 관계는 $N_p=a\;N_{Re}{^b}$ 이었으며 교반기의 형태에 따른 상수 a와 혼합계의 종류에 따른 상수 b의 값은 각각 2200~4100, -0.69~-0.63 범위이었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3150-3155
• /
• 2007

This paper describes an experimental work to investigate the effect of mesh screen device on the jet structure and acoustic characteristics of over-expanded supersonic jet. The mesh screen device is placed into the supersonic jet stream. In order to perturb mainly the initial jet shear layer, the hole is perforated in the central part of the mesh screen. The diameter of the perforated hole and the location of mesh screen device are varied. A Schlieren optical system is used to visualize the flow fields of supersonic jet without and with the mesh screen device. Pitot pressure measurement is carried out to obtain the pressure distribution in the jet flow. Acoustic measurement also is performed to obtain the OASPL and noise spectra. The results obtained show that the jet structure and the jet noise control effectiveness is strongly dependent upon the diameter of the perforated hole and the location of the mesh screen device in the jet stream. Provided that the mesh screen device is placed at the location to perturb effectively the initial shear layer, the present control method is effective in suppressing the supersonic jet noise.