• 전기학회논문지
• /
• 제60권5호
• /
• pp.965-970
• /
• 2011

This paper deals with the PM performance evaluations in a pole changing memory motor (PCMM) using a coupled transient finite element method (FEM) and Preisach modeling, which is presented to analyze the magnetic characteristics of permanent magnets. The focus of this paper is the characteristics evaluation relative to magnetizing direction and the pole number of machine on re-demagnetization condition in a pole changing memory motor.

• Journal of Magnetics
• /
• 제16권4호
• /
• pp.386-390
• /
• 2011

This paper deals with the magnetic equivalent circuit modeling and permanent magnet (PM) performance evaluations of a pole changing memory motor (PCMM). We use a coupled transient finite element method (FEM) and Preisach modeling, which is presented to analyze the magnetic characteristics of the permanent magnets. The focus of this paper is on the evaluation of characteristics such as the magnetizing direction and the pole number of the machine under re- and de-magnetization conditions.

• 대한임베디드공학회논문지
• /
• 제6권5호
• /
• pp.263-272
• /
• 2011

The complexity of flash memory based storage systems is high due to diverse host interfaces and other design choices such as mapping granularity, flash memory controller execution models and so on. Thus, it is possible that the actual performance after implementation is not consistent with the target performance. This paper demonstrates that the performance prediction of flash memory based storage systems is possible through performance modeling that takes into account various design parameters. In the performance modeling, the FTL, which is the core element of flash memory based storage systems, is modeled as a set of (copy-on-write) logs and their interactions. Also, the flash memory controller is modeled based on the classification proposed in the design of the Ozone flash controller. In this study, the performance model has been implemented using Simulink and experimental results are presented and analyzed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.70-73
• /
• 1992

This paper describes the modeling of human memory using a nerve field model which is proposed for modeling the mechanism of brain mathematically. In our model, two phases of memory, retention and recollection, are focused on. The former consists of two stages, short-term memory (STM) and long-term memory (LTM). The proposed model consists of three parts, the STM Layer, LTM Layer and the Intermediate Layer between them. Each of these is constructed by a nerve field. In the STM Layer, memorized information is retained dynamically in the form of the reverberating states of units within the layer, while in the LTM Layer, it is stored statically in the form of structures of the weight on the links between units. the Intermediate Layer is introduced to translate this dynamic representation in the STM Layer to the LTNI Layer, and also to extract the static information from the STM Layer. In addition to this, we consider the recollection of information stored in the LTM. Finally, the behavior of this model is demonstrated by computer simulation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1137-1138
• /
• 2011

This paper deals with the PM performance evaluations in a pole changing memory motor (PCMM) using a coupled transient finite element method (FEM) and Preisach modeling, which is presented to analyze the magnetic characteristics of permanent magnets. The focus of this paper is the characteristics evaluation relative to magnetizing direction and the pole number of machine on re-, demagnetization condition in a pole changing memory motor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.261-264
• /
• 2004

In this paper, we identify the memory effect of high power(125W) laterally diffused metal oxide-semiconductor(LDMOS) RF Power Amplifier(PA) by two tone IMD measurement. We measure two tone IMD by changing the tone spacing and the power level. Different asymmetric IMD is founded at different center frequency measurements. We propose the Tapped Delay Line-Neural Network(TDNN) technique as the modeling method of LDMOS PA based on two tone IMD data. TDNN's modeling accuracy is highly reasonable compared to the memoryless adaptive modeling method.

• 지구물리와물리탐사
• /
• 제21권4호
• /
• pp.213-219
• /
• 2018

본 연구에서는 제온 파이 x200 프로세서를 이용하여 3차원 파동 전파 모델링을 수행하고 기존의 제온 CPU를 사용한 경우와 병렬 연산 성능을 비교하였다. 제온 파이 1세대 프로세서인 제온 파이 나이츠 코너 보조프로세서와 달리 제온 파이 2세대 프로세서인 x200 프로세서는 직접 운영체제 실행이 가능하므로 내장 메모리와 주메모리 사이의 추가적인 통신이 필요 없다. 또한 제온 파이 x200 프로세서는 대용량 주메모리와 고대역폭 메모리를 이용하여 대규모 컴퓨팅을 독립적으로 실행할 수 있다. 병렬 연산 성능 비교를 위해 MPI (Message Passing Interface)와 OpenMP (Open Multi-Processing)를 이용해 모델링을 수행하였다. SEG/EAGE 암염돔 모델을 이용한 수치 실험 결과 제온 파이에서 다량의 연산 코어와 고대역폭 메모리를 이용해 12 코어 CPU 대비 2.69 ~ 3.24배 우수한 모델링 성능을 얻을 수 있었다.

• Smart Structures and Systems
• /
• 제33권3호
• /
• pp.243-251
• /
• 2024

Modeling of vibrations of a rotating pendulum with working shape memory alloy rod has been performed in the frames of a microstructural model taking into account the latent heat release, absorption and the heat exchange during direct and reverse martensitic transformation. It has been shown that the influence of the latent heat, the rate of preliminary deviation of the pendulum from the equilibrium, the rate of heating and cooling can have a significant impact on the vibrations and damping characteristics of the system.

• 전기전자학회논문지
• /
• 제25권4호
• /
• pp.778-781
• /
• 2021

본 논문에서는 SPICE를 사용한 16단 3D NAND Flash memory compact modeling을 제안한다. 동일한 structure와 simulation 조건에서 Down Coupling Phenomenon(DCP)과 Natural Local Self Boosting(NLSB)에 대한 channel potential을 Technology Computer Aided Design(TCAD) tool Atlas(Silvaco^TM)와 SPICE로 simulation하고 분석했다. 그 결과 두 현상에 대한 TCAD와 SPICE의 channel potential이 매우 유사한 것을 확인할 수 있었다. SPICE는 netlist를 통해 소자 structure를 직관적으로 확인할 수 있다. 또한, simulation 시간이 TCAD에 비해 짧게 소요된다. 그러므로 SPICE를 이용하여 3D NAND Flash memory의 효율적인 연구를 기대할 수 있다.

• Journal of Mechanical Science and Technology
• /
• 제19권7호
• /
• pp.1460-1468
• /
• 2005

Two possible shape memory processes, austenite to detwinned martensite transformation and twinned martensite to detwinned martensite transformation of a shape memory alloy have been modeled and examined. Eshelby's equivalent inclusion method with Mori-Tanaka's mean field theory is used for modeling of the shape memory processes of TiNi shape memory alloy reinforced aluminum matrix composite. The shape memory amount of shape memory alloy, plastic strain and residual stress in the matrix are computed and compared for the two processes. It is shown that the shape memory amount shows differences in a small prestrain region, but the plastic strain and the residual stress in the matrix show differences in the whole prestrain region. The shape memory process with initially martensitic state of the shape memory alloy would be favorable to the increase in the yield stress of the composite owing to the large compressive residual stress and plastic strain in the matrix.