• Journal of Periodontal and Implant Science
• /
• v.36 no.1
• /
• pp.223-237
• /
• 2006

The purpose of the present study was to evaluate the effect of bone graft materials including deproteinized bovine bone(DBB), demineralized freeze-dried bone(DFDB), freeze-dried bone(FDB) on bone formation in guided bone regeneration using perforated titanium membrane(TM). 16 adult male rabbits(mean BW 2kg) were used in this study and 4 rabbits allotted to each test group. Intramarrow penetration(diameter 6.5mm) was done with round carbide bur on calvaria to promote blood supply and clot formation in the wound area. The test groups were devided into 4 groups as follows: TM only(test 1), TM +DBB(test 2), TM +DFDB(test 3), TM +FDB(test 4). Perforated titanium membrane was contoured in rectangular parallelepiped shape(0.5mm pore diameter, 10mm in one side, 2mm in inner height), filled the each graft material and placed on the decorticated carvaria. Perforated titanium membrane was fixed with resorbable suture materials. The animals were sacrificed at 2, 8 weeks after the surgery. Non-decalcified preparations were routinely processed for histologic analysis. The results of this study were as follows: 1. Perforated titanium membrane was biocompatible. 2. Perforated titanium membrane had capability of maintaining the space during the healing period but invasion of soft tissue through the perforations of titanium membrane decreased the space available for bone formation. 3. In test 1 group without bone graft material, the amount of bone formation and bone maturation was better than other test groups. 4. Among the graft materials, the effect of freeze-dried bone on bone formation was best. 5. In the test groups using deproteinized bovine bone, demineralized freeze-dried bone, bone formation was a little. The spacemaking capability of the membrane may be crucial for bone formation. The combined treatment with the perforated titanium membrane and deproteinized bovine bone or demineralized freeze-dried bone failed to demonstrate any added effect in the bone formation. Minimization of size and numbers of perforations of titanium membrane or use of occlusive titanium membrane might be effective to acquire predictable results in the vertical bone formation.

• Membrane and Water Treatment
• /
• v.7 no.6
• /
• pp.495-505
• /
• 2016

Mesoporous MCM-41 was deposited on an inexpensive disk shaped ceramic support through hydrothermal technique for ultrafiltration of $Fe^{3+}$ from aqueous solution. The ceramic support was fabricated using uni-axial compaction technique followed by sintering at $950^{\circ}C$. The characteristics of MCM-41 powder as well as the composite membrane were examined by X-ray diffraction (XRD), thermogravimetric analysis (TGA), field emission scanning electron microscope (FESEM), porosity and pure water permeation test. The XRD result revealed the good crystallinity and well-resolved hexagonally arranged pore geometry of MCM-41. TGA profile of synthesized MCM-41 zeolite displayed the three different stepwise mechanisms for the removal of organic template. The formation of MCM-41 on the porous support was verified by FESEM analysis. The characterization results clearly indicated that the accumulation of MCM-41 by repeated coating on the ceramic disk directs to reduce the porosity and pore size from 47% to 23% and 1.0 to $0.173{\mu}m$, respectively. Moreover, the potential of the fabricated MCM-41 membrane was investigated by ultrafiltration of $Fe^{3+}$ from aqueous stream at various influencing parameters such as applied pressure, initial feed concentration and pH of solution. The maximum rejection 85% was obtained at applied pressure of 276 kPa and the initial feed concentration of 250 ppm at pH 2.

• Journal of Applied Biological Chemistry
• /
• v.60 no.4
• /
• pp.351-355
• /
• 2017

Tolaasin, peptide toxin produced by Pseudomonas tolaasii, causes a brown blotch disease on the cultivated mushrooms. Tolaasin peptides form membrane pores and disrupt cellular membrane structure. Molecular actions of tolaasin consist of the aggregation of peptide molecules, binding to the cell membrane, and formation of membrane pores. Therefore, the inhibitions of any of these actions are able to suppress the blotch disease. We have isolated and identified several tolaasin inhibitors (named tolaasin inhibitory factors, TIF) from food additives. TIFs were able to suppress the blotch-formation by the pathogen inoculated to the mushrooms. In this study, TIFs were incubated under various conditions and their activities for the inhibition of tolaasin-induced hemolytic activity were investigated. Since TIFs are unsaturated carbon compounds, they were sensitive to the air exposure and light irradiation. In the anaerobic conditions, TIFs were stable and their activities were decreased by 10% for three months. However, near 90% of TIF activity was suppressed by two weeks in the presence of air and sun light. Temperature did not show any significant effects on the activity of TIF, since storages at 5, 25, $45^{\circ}C$ did not show any difference. Therefore, for the stable storage of TIF compounds, container should be designed to be dark and air-tight.

• Korean Membrane Journal
• /
• v.1 no.1
• /
• pp.100-105
• /
• 1999

A novel system to thicken the concentrated colloidal solution from membrane water treat-ment processes was developed. A hollow-fiber microfilter(hydrophilic polyethylene nominal pore size 0.1 ${\mu}$m total surface area 0.42 m2) was installed in an acrylic housing that has an aeration port 5 cm below the membrane and a clarifier in the bottom. The concentrate was uniformly supplied from the top of the housing. Bacuum filtration caused downward flow of concentrate and as a result thickening interface. The addition of poly-aluminum chloride (PAC) resulted in rapid increase of trans-membrane pressure (TMP) and in no improvement of the filtered water turbidity and thickening process. Two types of con-centrate and concentrate turbidity had little effect on the increase of TMP and concentrate thickening. It was observed that for the same height of membrane housing membrane surface area to housing volume (A/V) ratio had significant effect on the increase of TMP. When the housing volume was increased ten times the increasing rate of TMP was three times faster as compared to the original housing. A hydraulic model successfully simulated the formation and sedimentation of thickening interface.

• Membrane Journal
• /
• v.26 no.4
• /
• pp.310-317
• /
• 2016

Lithium ion secondary battery (LISB) is an energy conversion system operated via charging-discharging cycle based on Lithium ion migration. LISB has a lot of advantages such as high energy density, low self-discharge rate, and a relatively high lifetime. Recently, increasing demands of electric vehicles have been encouraging the development of LISB with high capacity. Unfortunately, it causes some critical safety issues. It includes dendrite formation on negative electrode, resulting in electric shortage problems and battery explosion. Also, the elevated temperatures occurred during the LISB operation induces thermal shrinkage of polyolefin (e.g., polyethylene and polypropylene) separators. Consequently, the low thermal stability leads to decay of LISB performances and the reduction of lifetime. In this study, sulfonated poly (arylene ether sulfone) (SPAES) random copolymers were used as key materials to prepare polyolefin pore-filling separator. The resulting separators were evaluated in the term of metal ion chelation capability associated with dendrite formation, $Li^+$ ion conductivity and thermal durability.

• Korean Membrane Journal
• /
• v.9 no.1
• /
• pp.1-11
• /
• 2007

To prepare chemically stable asymmetric microporous membranes with a hydrophilic surface, which would be expected to have better antifouling properties, poly(vinylidene fluoride) (PVDF) blend membranes were prepared by the phase inversion process. PVDF mixture solutions in N-methylpyrrolidone (NMP) blended with several polar potential ionic polymers such as polyacrylonitrile (PAN), poly(methylmethacrylate) (PMMA) and poly(N-isopropylacrylamide) (NIPAM) were used for the formation of the PVDF blend membranes. They were then characterized with several analytical methods such as FESEM, FTIR, contact angle measurement, pore size distribution and permeability measurement. Regardless of different polar polymers blended, they all showed a finger-like structure with more hydrophilic surface than the pristine PVDF membrane. For all the PVDF blend membrane, due to the polar potential ionic polymers used, the flux of those was improved. Especially the PVDF blend membrane with NIPAM showed the highest flux among the membranes prepared. Also antifouling property of the PVDF membrane was improved by the use of the polar polymers.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.429-429
• /
• 2009

Nanoporous anodic alumina membranes (NAAM) with high-density through-hole pores fabricated by hard anodization of aluminum in 0.3 M oxalic acid under the applied voltage of 40 (mild anodization), 80, 100, 120 and 140 V were investigated. The current-time responses monitored using a PC-controlled anodization cell and the corresponding pore structures attainable from field-enhanced scanning electron microscopy (FE-SEM) were analyzed in order to establish the optimum fabrication process. The nanoporous structure can be produced for all the voltage conditions, while the stabilized through-hole pore formation seems to occur at 40, 80 and 140 V. The growth rate under 140 V hard anodization was over 30 times higher than under 40 V mild anodization (1.5 um/hr).

• Proceedings of the Membrane Society of Korea Conference
• /
• 2004.05a
• /
• pp.166-169
• /
• 2004

Microfiltration membranes were prepared from aromatic polyethersulfone (PES) polymer, using aprotic solvent (N-methyl-2-pyrrolidone, NMP) and non-solvent additive (2-methoxy ethanol, 2-ME) by the phase inversion co-process of the vapor-induced phase inversion (VIPI) and the nonsolvent-induced phase inversion (NIPI). According to the change of the additive amount, the solvent amount and the relative humidity, membrane characterization was studied. The non-solvent additive in casting solution played an important role in membrane morphology. During the vapor-induced phase inversion, the relative humidity led to water sorption on the surface of casting dope at which pore formation was generated. The prepared membranes were characterized by scanning electron microscope observations, measurements of capillary flow porometer and pure water flux (PWP). Also the thermodynamic and kinetic properties of membrane-forming system were studied through coagulation value, light transmittance and viscosity.

• Membrane Journal
• /
• v.6 no.2
• /
• pp.96-100
• /
• 1996

In order to improve the permeability of the homogenous membrane of poly(carbobenzoxy-L-lysin)(PCLL), which has very high selectivity of helium gas to nitrogen gas, asymmetric porous membranes of PCLL were prepared by casting from 20% solutions in dioxane and dimethylformamide(DMF), respectively. The membranes were characterized by measuring the number of the pores, the pore size distribution of the surface(the skin layer) and the thickness of the skin layer by scanning electron microscope and transmission electron microscope. The mean pore size and the pore density were lower for the membrane cast from dioxane than that from DMF, which was explained by the mechanism of the formation of the pores in the asymmetric porous membrane. The permeability coefficient observed could be roughly explained by the viscous flow through the skin layer. However, the selectivity observed was against the theory of the viscous flow.

• Journal of Applied Biological Chemistry
• /
• v.60 no.2
• /
• pp.179-184
• /
• 2017

Tolaasin, a 1.9 kDa peptide toxin, is produced by Pseudomonas tolaasii and causes the brown blotch disease of cultivated oyster mushroom. It forms pores on the membrane and thus destroys cellular membrane structure, seriously reducing the productivity of mushroom cultivation. The mechanism of tolaasin-induced cytotoxicity is not known in detail. However, it has been reported to form a pore structure in the cytoplasmic membrane through the molecular multimerization. Therefore, food additives which can interact with tolaasin molecules may inhibit the pore formation by hydrophobic interactions with tolaasin molecules. In this study, various food additive materials have been identified as inhibitors of the tolaasin activity and named tolaasin-inhibitory factors (TIF). Most of TIFs are emulsifying agents for food processing procedures. Among various TIFs, polyglycerol and sucrose esters of fatty acids blocked effectively the cytotoxicity of tolaasins at the concentrations $10^{-4}-10^{-5}M$. These TIFs also successfully suppressed the blotch disease development in the shelf cultivation of oyster mushroom.