• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.18 no.1
• /
• pp.135-143
• /
• 1996

The aim of this study was to evaluate bone promotion of bioreabsorbable guided tissue regeneration for generating new bone adjacent to osseointegrated implants in dogs. Third premolars were extracted in dgo mandibles. Cylindrical HA-coated implants were placed into extracted sockets in dogs. And test sites were protected by $GUIDOR^{(R)}$ matrix barrier. But control sites were not protected by membrances. The sites were examined clinically, radiologically, and histologically after 1, 2, and 4 months to assess bone regeneration. The results obtained were as foolows : 1. There were the good healing and the stability of $GUIDOR^{(R)}$ matrix barrier in experimental site during the healing period. 2. Complete resorption of $GUIDOR^{(R)}$ matrix barrier was clinically observed about 4 months postoperatively. 3. The woven bone changed to mature bone with a normal cortical plate and mature, resting periosteum after 4 months. 4. In experimental site, there was a significantly greater bone promtion than observed in control site. 5. $GUIDOR^{(R)}$ matrix barrier was useful for the preparation of immediate dental implants.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1999.07a
• /
• pp.39-42
• /
• 1999

Perfluoropolymers represent the ultimate resistance to hostile chemical environments and high service temperature, attributed to the presence of fluorine in the polymer backbone, i.e. to the high bond energy of C-F and C-C bonds of fluorocarbons. Copolymers of Tetrafluoroethylene (TEE) and 2, 2, 4Trifluoro-5Trifluorometoxy- 1, 3Dioxole (TTD), commercially known as HYFLON AD, are amorphous perfluoropolymers with glass transition temperature (Tg)higher than room temperature, showing a thermal decomposition temperature exceeding 40$0^{\circ}C$. These polymer systems are highly soluble in fluorinated solvents, with low solution viscosities. This property allows the preparation of self-supported and composite membranes with desired membrane thickness. Symmetric and asymmetric perfluoropolymer membranes, made with HYFLON AD, have been prepared and evaluated. Porous and not porous symmetric membranes have been obtained by solvent evaporation with various processing conditions. Asymmetric membranes have been prepared by th wet phase inversion method. Measure of contact angle to distilled water have been carried out. Figure 1 compares experimental results with those of other commercial membranes. Contact angles of about 120$^{\circ}$for our amorphous perfluoropolymer membranes demonstrate that they posses a high hydrophobic character. Measure of contact angles to hexandecane have been also carried out to evaluate the organophobic character. Rsults are reported in Figure 2. The observed strong organophobicity leads to excellent fouling resistance and inertness. Porous membranes with pore size between 30 and 80 nanometers have shown no permeation to water at pressures as high as 10 bars. However high permeation to gases, such as O2, N2 and CO2, and no selectivities were observed. Considering the porous structure of the membrane, this behavior was expected. In consideration of the above properties, possible useful uses in th field of gas- liquid separations are envisaged for these membranes. A particularly promising application is in the field of membrane contactors, equipments in which membranes are used to improve mass transfer coefficients in respect to traditional extraction and absorption processes. Gas permeation properties have been evaluated for asymmetric membranes and composite symmetric ones. Experimental permselectivity values, obtained at different pressure differences, to various single gases are reported in Tab. 1, 2 and 3. Experimental data have been compared with literature data obtained with membranes made with different amorphous perfluoropolymer systems, such as copolymers of Perfluoro2, 2dimethyl dioxole (PDD) and Tetrafluorethylene, commercialized by the Du Pont Company with the trade name of Teflon AF. An interesting linear relationship between permeability and the glass transition temperature of the polymer constituting the membrane has been observed. Results are descussed in terms of polymer chain structure, which affects the presence of voids at molecular scale and their size distribution. Molecular Dyanmics studies are in progress in order to support the understanding of these results. A modified Theodoru- Suter method provided by the Amorphous Cell module of InsightII/Discover was used to determine the chain packing. A completely amorphous polymer box of about 3.5 nm was considered. Last but not least the use of amorphous perfluoropolymer membranes appears to be ideal when separation processes have to be performed in hostile environments, i.e. high temperatures and aggressive non-aqueous media, such as chemicals and solvents. In these cases Hyflon AD membranes can exploit the outstanding resistance of perfluoropolymers.

• Korean Journal of Food Science and Technology
• /
• v.30 no.1
• /
• pp.90-96
• /
• 1998

An experiment to make mixed juices carrying the freshness and other specific characteristics of vegetables and fruits which are useful for the prevention and treatment of various diseases was attempted on the emphases of pretreatment methods, combination of fruits and vegetables, and elimination of microorganisms. Blanch in boiling water prior to extraction for green vegetables, addition of ascorbic acid during extraction for tomatoes and apples, or addition of ascorbic acid after blanch in 3% acetic acid for carrots was effective to keep colors and suspended solids in liquid extract. On the basis of sensory evaluation the extracts from tomatoes, apples. carrots. mallows, watercreses+pine needles, Angelica keiskei Koiz, jujubes and lemons were selected and mixed at the ratio of 3 : 3 : 3 : 1/2 : 1/2 : 1/2 : 1/2 : 1/5. The mixed extracts were pasteurized for 15sec at $96^{\circ}C$ or filtered through a ultramembrane filter. While the centrifuge precipitation and retentates on the membrane filter were autoclaved and combined with ultrafiltrates. The mixed juices showed $pH\;4.07{\sim}4.10$ titratable acidity $66.35{\sim}84.08$, soluble solid $7{\sim}9^0Brix$, reducing sugar $5.42{\sim}6.97%$, glucose $1.96{\sim}2.30%$, fructose $3.46{\sim}4.14%$ and high content of K, Mg and Ca. Ultrafiltration showed better quality scores in color, juice. Peroxidase and microorganisms were inactivated by thermal treatment and ultrafiltration.

• Journal of Korean Society of Forest Science
• /
• v.35 no.1
• /
• pp.24-32
• /
• 1977

According to the chlorous salt method, most of holocellulose whose lignin was removed, was obtained. In extracting xylan from holocellulose by the different densities of alkali, 5% KOH was extracted three times but still there remained part of xylan in it and another composite of hemicellulose and cellulose was obtained. The extraction of 10% and 20% KOH showed a desirable result. Rather than the ordinary method to use a large quantity of ethanol in the precipitation isolation of xylan, the method to use a small quantity of ethanol in adopting the dialysis with cellophane-membrane by condensing density to one tenth, made il possible to extract a high purity xylan in a high retrieving rate. In isolating glucomannan, the residue of 5% KOH extraction contained a large quantity of xylan, the residue of 10% and 24% KOH extraction, also showed the same result and the comparison between glucose and mannose was approximately 1 : 1. The purification of Fehling solution made it possible to obtain comparatively pure xylan but the process of oxidation dissolution was complicated and the retrieving rate was low. This was not a good method. The ethanol titration purified a high purity xylan in a high retrieving rate and was a very excellent purifying method, considering its simple and easy process. These two purifying methods, however, could not completely remove the residue of arabinose. This will be examined and reported later.

• The KSFM Journal of Fluid Machinery
• /
• v.16 no.1
• /
• pp.61-65
• /
• 2013

Water is an integral part of energy production because it is used directly in many power generation systems such as hydroelectric power plants and thermoelectric power plants. Water is also used extensively in energy-resource extraction, oil, natural gas, and alternative fuels refining and processing. Recently, osmotic power systems using seawater and freshwater has been also investigated to produce electricity in a sustainable way. This study focused on the use of RO and PRO for the mutual conversion of water and energy. This system allows the production of water from seawater if there is not enough water. It can also generate electricity from salinity gradient of brine water and fresh water if there is not enough energy. To demonstrate the feasibility of this technology, a set of laboratory-scale experiments were carried out using a specially-designed RO/PRO system. The efficiency of energy conversion was theoretically estimated based on the results from the experiments. The results indicated that water and energy could be easily converted using a single device. Nevertheless, a lack of optimum membrane for this purpose was identified as a major barrier for practical application.

• Journal of Computing Science and Engineering
• /
• v.8 no.3
• /
• pp.129-136
• /
• 2014

This paper presents the equivalent circuit modelling and eigenfrequency analysis of a wideband robust capacitive radio frequency (RF) microelectromechanical system (MEMS) switch that was designed using Poly-Si and Au layer membrane for highly reliable switching operation. The circuit characterization includes the extraction of resistance, inductance, on and off state capacitance, and Q-factor. The first six eigenfrequencies are analyzed using a finite element modeler, and the equivalent modes are demonstrated. The switch is optimized for millimeter wave frequencies, which indicate excellent RF performance with isolation of more than 55 dB and a low insertion loss of 0.1 dB in the V-band. The designed switch actuates at 13.2 V. The R, L, C and Q-factor are simulated using Y-matrix data over a frequency sweep of 20-100 GHz. The proposed switch has various applications in satellite communication networks and can also be used for devices that will incorporate the upcoming IEEE Wi-Fi 802.11ad protocol.

• Journal of Environmental Health Sciences
• /
• v.40 no.4
• /
• pp.265-278
• /
• 2014

Microbes such as bacteria, fungi, archaea, protists, and viruses are ubiquitous and people are exposed to them continuously. Endotoxin is a component of the outer membrane of Gram-negative bacteria and a potent proinflammaotry substance. When a person is exposed to environmental endotoxin, an innate immune response is initiated upon the initial recognition and this response produces various inflammatory mediators and recruits inflammatory cells to the exposed tissues. A purified chemical form of endotoxin is called lipopolysaccharide (LPS), and the lipid A portion of the molecule is a biologically active moiety. Exposure to endotoxin may result in various complex health effects depending on time, route, and dose of exposure, as well as host susceptibility. Gene-environment interactions play important roles in health effects of endotoxin exposure, e.g. development or aggravation of asthma. To accurately assess exposure to endotoxin in environmental or epidemiologic studies, methods of sampling, extraction, and analysis must be carefully selected since the selected methods may substantially affect analytical results and there is no internationally-agreed standard method to date. The lack of a standardized method hampers the establishment of exposure-response relationships. While an internationally-agreed health-based exposure limit does not exist, the Dutch Expert Committee on Occupational Safety recently recommended $90EU/m^3$ as a health-based occupational exposure limit. The current article reviews various scientific issues on how we measure environmental endotoxin and the health effects of endotoxin exposure.

• 한국가시화정보학회:학술대회논문집
• /
• 2003.11a
• /
• pp.81-82
• /
• 2003

We have developed the method for the conjugation of biotinylated DNA to streptavidin-coated QDs. QD-DNA conjugates and a high-sensitive fluorescence imaging technique are adopted to visualize gene transport across the membrane of the live cell in real time. Endocytotic cellular uptake of oligonucleotide and electrically-mediated plasmid DNA transfer into the live cell are monitored by a quantitative microscopic imaging system. Long-term kinetic study enables us to reveal the unknown mechanisms and rate-limiting steps of extracellular and intracellular transport of biomolecules. We designed experimental protocols to conjugate the oligonucleotide or the plasmid DNA to commercially available streptavidin-coated QDs. Gel electrophoresis is used to verify the effect of incubation time and the molar ratio of QDs and DNA on the conjugation efficiency. It is possible to fractionate the QD-DNA conjugates according to the DNA concentration and obtain the purified conjugates by a gel extraction technique.

• Preventive Nutrition and Food Science
• /
• v.15 no.2
• /
• pp.92-97
• /
• 2010

Luteolin and chicoric acid are the most abundant phytochemicals in dandelion (Taraxacum officinale) leaf. In this study, four kinds of extraction methods [hot water, ambient temperature (AT) water, ethanol, and methanol] were applied to analyze the contents of both phytochemicals and verify their anti-inflammatory and antioxidative activities. The methanol extract showed the most potent nitric oxide (NO) inhibitory effect. The luteolin and chicoric acid concentrations were 3.42 and $12.86\;{\mu}g/g$ dandelion leaf in the methanol extract. The NO-suppressive effect of luteolin and chicoric acid was identified in a dose-dependent manner with $IC_{50}$ values of $21.2\;{\mu}M$ and $283.6\;{\mu}M$, respectively, in lipopolysaccharide (LPS)-stimulated RAW 264.7 cells without cytotoxicity. Malondialdehyde (MDA) concentration, as an index for free radical injury on cell membrane, was also dose-dependently inhibited by the two compounds. The suppressive effect was further examined using mRNA and protein expression levels, which were attributable to the inhibition of inducible nitric oxide synthase (iNOS). These results suggest that two phytochemicals in dandelion leaf, luteolin and chicoric acid, may play an important role in the amelioration of LPS-induced oxidative stress and inflammation.

• Membrane and Water Treatment
• /
• v.9 no.3
• /
• pp.147-153
• /
• 2018

This study investigates the role of microbial extracellular polymeric substances (EPSs) as bioflocculants to harvest microalgae (water-microalgae separation). The EPS extracted from waste activated sludge (WAS) by heat extraction were fractionated into soluble EPS (S-EPS), loosely-bound EPS (LB-EPS) and tightly-bound EPS (TB-EPS) forms. All the EPSs facilitated the flocculation of microalgal cells from stable growth medium. Of those EPSs, the TB-EPS showed the highest flocculating activity (FA) resulting in the substantial decrease in the amount of EPS added in terms of total organic carbon (TOC) during flocculation. The FA of microalgae was improved with the increase in TB-EPS dose, however, excessive dose of TB-EPS adversely affected it due to destabilization. Both LB- and TB-EPS could be utilized for flocculating microalgae as a sustainable option to the existing chemical-based flocculants. In addition to the conventional assessments, the effectiveness of the two bioflocculants for floc forming was also confirmed using a novel assessment of lens-free shadow imaging technique (LSIT), which was firstly applied for the rapid and quantitative assessment of microalgal flocculation.