• 멤브레인
• /
• 제20권4호
• /
• pp.342-350
• /
• 2010

막증류는 소수성이 강한 0.1 내지 $0.5{\mu}m$의 정밀여과막을 통하여 휘발도가 상대적으로 큰 성분을 증발시켜 분리하는 방법이다. 본 연구에서는 중공사형 분리막을 이용한 직접접촉식 막증류 공정을 "COMSOL Multiphysics" 프로그램을 이용하여 수치해석 하였으며 유체의 유입온도, lumen 및 shell side 공급 유속의 변화로 인한 투과량의 변화를 해석하였다. Lumen 공급용액의 온도가 30 에서 $50^{\circ}C$까지 증가할 경우 막증류 투과량은 1.0에서 $3.8L/m^2{\cdot}hr$ 까지 증가하였으나 shell 유체온도 영향은 상대적으로 낮았다. 또한 lumen 공급유속에 따른 막증류 투과량과 운전 압력손실을 고려할 경우 0.15 m/s ($Re_L=135$)일 때 가장 효율적임을 확인하였다.

• Membrane and Water Treatment
• /
• 제6권1호
• /
• pp.1-13
• /
• 2015

The modification of ultrafiltration membranes with carbon nanotube (CNT) buckypaper on fouling control was investigated. Two types of commercially available flat-sheet membranes were used: PS35 and PES900C/D (PES) (the PS35 membranes were hydrophilic with a molecular weight cutoff of 20 kDa, and the PES membranes were hydrophobic with a molecular weight cutoff of 20 kDa). The CNT buckypaper modified ultrafiltration membranes were prepared by filtering a CNT suspension through the flat-sheet membrane in a dead-end ultrafiltration unit. After modification, the pure water flux of PES was significantly increased, while the pure water flux of PS35 was decreased. The properties of the CNT modified membranes were also investigated. Considering the antifouling properties, pure water flux of the modified membrane, and the stability of CNT buckypaper layer on the membrane surface, ethanol solution with a concentration of 50 wt.%, multi-walled carbon nanotubes (MWCNTs) with a larger diameter (30-50 nm), and the CNT loading with $7.5g/m^2$ was selected. The CNT buckypaper on the surface of ultrafiltration membranes can trap the pollutants in sewage effluent and prevent them reaching the surface of virgin membranes. Water quality analysis showed that the effluent quality of the modified membrane was obviously improved. The removal efficiency of humic acid and protein-like matters by the modified membrane was significant. These results indicate the potential application of the CNT buckypaper layer modified membranes in the field of wastewater reclaim.

• 멤브레인
• /
• 제25권6호
• /
• pp.538-546
• /
• 2015

폴리설폰막 위에 친수성 고분자를 Layer-by-Layer법으로 코팅하여 복합막을 제조하였다. FE-SEM 분석을 통하여 복합막 표면과 기공 내 코팅층을 확인하였다. 또한 100 ppm NaCl 용액에 대한 복합막의 투과성능 평가를 실시하였다. 복합막 제조를 위한 코팅 고분자는 PVSA, PEI, PAA, PSSA, PSSA_MA를 사용하였다. 폴리설폰막 표면에 8,000 ppm PAA (이온세기 0.35) 수용액을 3분 동안 코팅한 뒤 10,000 ppm PEI 수용액을 4분 동안 코팅하였다. 그 결과 PAA-PEI 복합막의 투과도는 101 LMH, 제거율은 66.7%로 가장 좋은 투과성능을 나타내었다. PAA-PEI 복합막의 투과성능은 도레이케미칼의 NE 4040-70 (투과도 = 30 LMH, 염 배제율 = 40~70%) 제품과 유사한 성능을 보여주는 우수한 투과 특성을 나타내었다.

• 한국수처리학회지
• /
• 제26권6호
• /
• pp.61-72
• /
• 2018

In this study, applicability of the decentralized water supply system were investigated by the high flux evaluation using ceramic membrane with combined pretreatment process. A) filtration process increased the transmembrane pressure of 1.4 kPa and 89.5 kPa on 2 and $5m^3/m^2{\cdot}d$ of filtration flux, respectively, the physical backwashing recovery rate were less than 28.6%. The (B) Coag./Floc. - Sedi. combined process with 4 mg / L of A-PAC showed that the transmembrane pressure increased to within 6 kPa, the physical backwashing recovery rate was over 37.9 % higher than (A) Filtration process. (C) Coag./Floc. combined process showed an increase of transmembrane pressure compared with (B) Coag./Floc. - Sedi. combined process, physical backwashing recovery rate was over 84%. As a result of the membrane fouling analysis using the resistance in series model, the combined pretreatment process showed that the cake resistance (Rc) was more than 92% at membrane filtration flux of $2m^3/m^2{\cdot}d$. In the (C) Coag./Floc. combined process, cake resistance(Rc) was over 86% on high flux conditions. The coagulation floc contained in influent was removed by the membrane, and the cake layer formed with the removed floc was identified as reversible fouling resistance which could be recovered by physical backwashing. The decentralized water supply system, which has the limitation of site area and installation space, is considered to could be operation of high flux of ceramic membrane by applying (C) Coag./Floc. combined process without sedimentation process.

• 한국식품과학회지
• /
• 제24권3호
• /
• pp.199-203
• /
• 1992

한외여과를 이용하여 다시마 열수추출물로 부터 가용성 저분자량의 정미성분을 회수하는데 필요한 조건을 최적화하기 위해, 분리막 선정 및 온도, 압력, Flow rate의 영향을 고찰하였고 선정된 최적 조건하에서 한외여과와 Diafiltration을 실시하여 투과유량의 flux profile과 정미성분의 회수율을 비교하였다. 분리막은 소수성인 GR 51PP가 친수성인 FS 형태보다 높은 투과유량을 유지하였다. Flow rate의 증가에 따라서 투과유량도 증가하는 경향을 보였으나 3.7 l/min에서 한계값을 나타내었다. 한편, 압력이 높은 경우에는 Steady-state에서 투과유량이 감소하는 경향을 보였고 온도 증가에 따라서는 큰 변화는 없었다. 한외여과와 Diafiltration 실시에 따른 투과유량의 Flux profile과 전체 고형분과 정미성분의 회수율을 조사한 결과 한외여과를 실시한 경우가 비교적 높은 회수율을 보였으나 투과유량은 전반적으로 Diafiltration 보다 낮았다.

• Membrane and Water Treatment
• /
• 제8권2호
• /
• pp.149-160
• /
• 2017

This study investigated effects of NaOH cleaning on the intrinsic permeability of polyvinylidene fluoride (PVDF) membranes and flux recoveries and membrane resistances under various conditions encountered during ultrafiltration in water treatment plants. The NaOH cleaning using 10,000 mg/L NaOH led to discoloration of PVDF membranes and had little effect on water flux. The NaOH cleaning was efficient in removing the fouling layer caused by humic water. However, long filtration induced a fouling layer that was not removed easily by NaOH cleaning. The lower temperature during filtration yielded rapid increases in transmembrane pressure and decreases in NaOH cleaning efficiency. The alkaline cleaning of PVDF changed the membrane properties such as the hydrophobicity and morphology. Foulant properties, operational conditions such as temperature, and chemical agents should be considered for cleaning strategies for PVDF applied in water treatment.

• Membrane and Water Treatment
• /
• 제8권5호
• /
• pp.411-421
• /
• 2017

Forward osmosis (FO) is an emerging technology which can possibly make the desalination process more cost and energy efficient. One of the major factors impeding its growth is the lack of an appropriate draw solute. The present study deals with the identification of potential draw solutes, and rank them. The comparison was carried out among ten draw solutes on the basis of four main parameters namely; water flux, reverse salt diffusion, flux recovery and cost. Each draw solute was given three 24 hour runs; corresponding to three different concentrations; and their flux and reverse salt diffusion values were calculated. A fresh membrane was used every time except for the fourth time which was the flux recovery experiment conducted for the lowest concentration and the change of flux and reverse salt diffusion values from the initial run was noted. The organic solutes inspected were urea and tartaric acid which showed appreciable values in other parameters viz. reverse salt diffusion, flux recovery and cost although they generated a lower flux. They ranked 5th and 8th respectively. All the experimented draw solutes were ranked based on their values corresponding to each of the four main parameters chosen for comparison and Ammonium sulfate was found to be the best draw solute.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2001년도 춘계 총회 및 학술발표회(한국막학회)
• /
• pp.3-10
• /
• 2001

• 한국막학회:학술대회논문집
• /
• 한국막학회 1999년도 추계 총회 및 학술발표회
• /
• pp.89-92
• /
• 1999

• 한국막학회:학술대회논문집
• /
• 한국막학회 1999년도 추계 총회 및 학술발표회
• /
• pp.124-127
• /
• 1999