• 대한치과기공학회지
• /
• 제27권1호
• /
• pp.41-55
• /
• 2005

This study is to investigate the increasing membership rate against the previous year among the members registered as representative members and general members of the Korea Dental Technician Association from 1990 to 2004. With this study, we aim to provide more systematic data about the current status of each members in the KDTA and reconsider the needs for the practical and distinguishing management of the members. Results of the study are as follows; 1. The increasing rate from 1990 to 2004: whole members; 2.14, representative members; 2.22, general members; 2.11. Average of increasing rate against the previous year: general members; 6.10%, whole members; 5.94%, representative members; 5.91%. 2. The increasing rate in the city branch from 1990 to 2004: whole members; 2.12, representative members; 2.03, general members; 2.15. Average of increasing rate against the previous year: general members; 6.63%, whole members; 6.05%, representative members; 5.23%. 3. The increasing rate in the province branch from 1990 to 2004: whole members; 2.21, representative members; 2.74, general members; 2.01. Average of increasing rate against the previous year: representative members; 7.58%, whole members; 5.99%, whole members; 5.35%. 4. Mean ratio between representative members and general members from 1990 to 2004: 1:2.6 against the whole members, 1:2.8 in the city branch, 1:2.3 in the province branch. The ratio between representative members and general members in the year 2004: 1:3.1 in Kyoungnam province, 1:3.0 in Inchon, 1:2.9 in Kwangju that indicates a high ratio between two members and in the case of Chongbuk, the ratio between two members is rather low as shown in 1:1.1.

• Steel and Composite Structures
• /
• 제45권4호
• /
• pp.513-533
• /
• 2022

This study presents similarities and differences between Turkish Building Code for Steel Structures, which are TS 648 and SDCCSS (Specification for Design, Calculation and Construction of Steel Structures) in terms of the design of the members. Hot-rolled I-shaped steel sections for symmetrical and U-shaped steel sections (i.e., channels) for monosymmetric sections were elaborated in detail. The design strength of tension members under tensile load, compression members under axial load and flexural members under flexure and shear were examined separately. Connection details for tension members, slenderness for compression members and distance between lateral supports for flexural members were considered as prime variables. Analysis results revealed the design strength of the tension members where at least one of the cross-sectional parts is not connected to the connection plates, I-shaped compression members where a slenderness ratio is below 39 (𝛌<39), U-shaped compression members and flexural members where L_b is between L_p and L_r (L_pb≤L_r) designed based on TS 648 are greater than those designed based on SDCCSS 2018. Strength differences between the specification can reach 79% for tensile members, 13% for compression members and 9% for flexural members.

• East Asian Economic Review
• /
• 제22권2호
• /
• pp.117-140
• /
• 2018

WTO was established in 1995 and as many as 36 new members joined WTO until December 2017. Thus it would be interesting to see if new members have committed higher or lower levels of market opening compared to the original members. In this regard, a sophisticated scoring scheme is needed to quantify market opening commitments. After proper econometric model is established for the original members, same model can be applied to the new members for comparison. It was found that new members committed a much higher level of commitment than the original members. In addition, it was also found that transition economies committed higher levels than the non-transition economies. More interesting finding is that among the new members, the larger the economies or the larger the trading volume are, the closer was the level of commitment to the predicted level. Then the question is whether this difference was due to benign neglect by the new members or due to malign select by the original members.

• International Journal of Advanced Culture Technology
• /
• 제8권2호
• /
• pp.76-84
• /
• 2020

In general, members of an organization want their own growth and development. As these members grow or develop, they feel satisfied and fulfilled in the process. Growth or development can motivate members to become more involved in their jobs. Therefore, these concepts are very important for organizations as well as individual members. Various elements of the organization affect the growth of its members. Leaders influence members to achieve organizational goals. Leaders can therefore be an important variable influencing the growth of members. Specific leadership informally develops the potential to identify and satisfy members' personal needs and to achieve higher performance. These leader behaviors motivate members and drive their growth. Thus, this leadership will have a significant impact on the growth of members. In addition, in this relationship, if members have perceived organizational support, they can further improve their expectations for growth. Therefore, support from leaders and organizations will have a positive impact on employee growth. This study highlights the importance of the growth of members of the organization. It demonstrates the moderating effects of leader's individualized consideration and perceived organizational support necessary elements for member growth. Through this process, the purpose and significance of the study are to identify the variables that affect the personal growth of members and explain how they can grow.

• 천문학회보
• /
• 제44권2호
• /
• pp.63.3-63.3
• /
• 2019

Nearby young moving groups (NYMGs hereafter) are gravitationally unbound loose young stellar associations located within 100 pc of the Sun. Since NYMGs are crucial laboratories for studying low-mass stars and planets, intensive searches for NYMG members have been performed. For identification of NYMG members, various strategies and methods have been applied. As a result, the reliability of the members in terms of membership is not uniform, which means that a careful membership re-assessment is required. In this study, I developed a NYMG membership probability calculation tool based on Bayesian inference (Bayesian Assessment of Moving Groups: BAMG). For the development of the BAMG tool, I constructed ellipsoidal models for nine NYMGs via iterative and self-consistent processes. Using BAMG, memberships of claimed members in the literature (N~2000) were evaluated, and 35 per cent of members were confirmed as bona fide members of NYMGs. Based on the deficiency of low-mass members appeared in mass function using these bona fide members, low mass members from Gaia DR2 are identified. About 2000 new M dwarf and brown dwarf candidate members were identified. Memberships of ~70 members with RV from Gaia were confirmed, and the additional ~20 members were confirmed via spectroscopic observation. Not relying on previous knowledge about the existence of nine NYMGs, unsupervised machine learning analyses were applied to NYMG members. K-means and Agglomerative Clustering algorithms result in similar trends of grouping. As a result, six previously known groups (TWA, beta-Pic, Carina, Argus, AB Doradus, and Volans-Carina) were rediscovered. Three the other known groups are recognized as well; however, they are combined into two new separate groups (ThOr+Columba and TucHor+Columba).

• 한국정밀공학회지
• /
• 제21권4호
• /
• pp.132-139
• /
• 2004

The open section members have been used as the members of vehicle such as automotives, airplanes and trains. When vehicles are crashed, these members have absorption of the energy and it is necessary for retainment of the survival space, and as the result, the prediction for the displacement of members in this case of the crash of vehicles is very important. The displacements of members in this case of the crash of automotives show combined aspect of both axial collapse and bending collapse. In the rollover accident when bending collapse happen, the collapse of each members is progressed by the plastic hinge which made from bending moment, and therefore the research for the behavior of members under bending moment after collapse is necessary to determine the internal energy which the members can absorb and the deformed shapes of the members on the step of design. In this paper, the characteristics of bending collapse at the members of the open cross-section were studied with experiment and numerical analysis. We made a comparative studied of the result of the experiment, and changed the axis according to the parallel-axis theorem.

• Structural Engineering and Mechanics
• /
• 제90권5호
• /
• pp.435-446
• /
• 2024

The use of cold-formed steel members is increasing day by day, especially in regions where earthquake effects are intensively experienced. Among cold-formed steel members (CFS), "channel" members are used more than other crosssectional members, especially in buildings or industrial structures. In recent years, several studies have been carried out on the axial load and flexural performance of these members under monotonic loading. In this study, CFS beam-column members were cyclically and monotonically loaded under combined axial load and biaxial bending moments, and their buckling behavior, load bearing capacity, stiffness, ductility, and energy absorption capacity were determined. For this purpose, monotonic and cyclic loading experiments were carried out on 30 CFS channel members at 15 different eccentricities. Then, material properties were determined by axial monotonic tensile and very low cycle fatigue tests for use in numerical studies. From the experimental results, the buckling modes, bearing capacities, ductility, stiffness, and energy absorption capacities of the members were obtained. The characteristics of the members were compared according to the stress state of the lips. According to the data obtained from the displacement transducer placed on the lips and on the back of the web, information about the buckling mode and curvature of the members was obtained. Finally, monotonic, and cyclic loading results were compared to determine the differences in the buckling behavior of the members.

• Journal of Welding and Joining
• /
• 제20권6호
• /
• pp.78-78
• /
• 2002

Front-side members are structures with the greatest energy absorbing capability in a front-end collision of vehicles. This paper was performed to analyze initial collapse characteristics of spot welded hat and double hat-shaped section members, which are basic shape of side members, on the shift of flange weld pitches. The impact collapse tests were carried out by using home-made vertical air compression impact testing machine, and impact velocity of hat-shaped section members is 4.17m/sec and that of double hat-shaped section members is 6.54m/sec. In impact collapse tests, the collapsed length of hat-shaped section members was about 45mm and that of double hat-shaped section members was about 50mm. In consideration of these condition, axial static collapse tests(0.00017m/sec) of hat and double hat-shaped section members were carried out by using UTM which was limited displacement, about 50mm. As the experimental results, to obtain the best initial collapse characteristics, it is important that stiffness of vehicle members increases as section shapes change and the progressively folding mode induces by flange welding pitch.

• Journal of Welding and Joining
• /
• 제20권6호
• /
• pp.802-808
• /
• 2002

Front-side members are structures with the greatest energy absorbing capability in a front-end collision of vehicles. This paper was performed to analyze initial collapse characteristics of spot welded hat and double hat-shaped section members, which are basic shape of side members, on the shift of flange weld pitches. The impact collapse tests were carried out by using home-made vertical air compression impact testing machine, and impact velocity of hat-shaped section members is 4.17m/sec and that of double hat-shaped section members is 6.54m/sec. In impact collapse tests, the collapsed length of hat-shaped section members was about 45mm and that of double hat-shaped section members was about 50mm. In consideration of these condition, axial static collapse tests(0.00017m/sec) of hat and double hat-shaped section members were carried out by using UTM which was limited displacement, about 50mm. As the experimental results, to obtain the best initial collapse characteristics, it is important that stiffness of vehicle members increases as section shapes change and the progressively folding mode induces by flange welding pitch.

• 한국자동차공학회논문집
• /
• 제13권5호
• /
• pp.50-56
• /
• 2005

Aluminum member absorbs energy by stable plastic deformation under axial loading. While CFRP(Carbon Fiber Reinforced Plastics) member absorbs energy by unstable brittle failure but its specific strength and stiffness is higher than those of aluminum member. In this study, for complement of detects and synergy effect by combination with the advantages of each member, the axial collapse tests were performed for aluminum CFRP members which are composed of aluminum members wrapped with CFRP outside aluminum circular members. Based on the respective collapse characteristics of aluminum and CFRP members, crushing behavior and energy absorption characteristics were analyzed for aluminum CRRP members which have different CFRP fiber orientation angle and thickness Test results showed that aluminum CFRP members supplemented the unstable brittle failure of CFRP members due to ductile nature of inner aluminum members. It turned out that the CFRP fiber orientation angle and thickness influence energy absorption capability together with the collapse mode of the members.