• Journal of Welding and Joining
• /
• v.13 no.4
• /
• pp.147-154
• /
• 1995

In order to study the bonding mechanism of Ni/B/Ni transient liquid phase bonding system, width of liquid layers were calculated, where in this system melting point of insert material(B) is higher than bonding temperature and melting point of base metal(Ni). Caclulated values were compared with experimental ones which were measured by bonding Ni/B/Ni system at 1433-1474K under vacuum atmosphere. As results, the width of initial liquid layer of Ni/B/Ni system was calculated as $W_{IL}$ = $W_{o}$[1 + {2.100..rho.$_{S/}$ ( $X_{3}$ + $X_{4}$)..rho.$_{Ni}$ }-.rho.$_{S/}$.rho. Ni/], and it was nearly same with experimental values. Maximum width of liquid layer, width of liquid layer during isothermal solidification and isothermal solidification time were calculated also.o.o.o.

• Journal of Welding and Joining
• /
• v.20 no.2
• /
• pp.77-81
• /
• 2002

Many kinds of Pb-free solder have been investigated because of the environmental concerns. Sn-Ag-Cu system is well blown as most competitive Pb-free solder. However, since Sn-Ag-Cu system has relatively high melting point compared to Sn-Pb eutectic, it may a limitation, the some application. In this study, Bi and In contained solder of $Sn_3Ag_8Bi_5In$ which has relatively lower melting point, $188~204^{\circ}C$, was investigated. $Sn_3Ag_8Bi_5In$ solder ball of $500\mu\textrm{m}$ diameter was set on the Ni/Cu/Cr-UBM and reflow soldered in the range of $220~240^{\circ}C$ for 5~15s. The maximum shear strength of the solder ball was around 170mN by reflowing at $240^{\circ}C$ for 10s. Intermetallic compound formed on the UBM of Si-wafer was analysed by SEM(scanning electron microscope) and XRD(X-ray diffractometer).

• International Journal of Precision Engineering and Manufacturing
• /
• v.7 no.3
• /
• pp.47-50
• /
• 2006

High-speed machining is a very useful tool and one of the most effective rapid manufacturing processes. This study sought to produce various high-speed machining materials with excellent quality and dimensional accuracy. However, high-speed machining is not suitable for microscale thin-walled structures because the structure stiffness lacks the ability to resist the cutting force. This paper proposes a new method that is able to rapidly produce very thin-walled structures. This method consists of high-speed machining followed by filling. A strong work-holding force results from the solidification of the filling materials. Low-melting point metal alloys are used to minimize the thermal effects during phase changes and to hold the arbitrarily shaped thin-walled structures quickly during the high-speed machining. We demonstrate some applications, such as thin-walled cylinders and hemispherical shells, to verify the usefulness of this method and compare the analyzed dimensional accuracy of typical parts of the structures.

• Laser Solutions
• /
• v.7 no.1
• /
• pp.37-47
• /
• 2004

Laser-assisted selective infiltration is a new method of building metal layers to make metal parts layer by layer, in which superheated microscopic metal droplets are infiltrated into a laser-preheated layer of microscopic metal powders. In this work, the selective infiltration of a low melting-point metal, Sn-37Pb wt%, was conducted to investigate the effects of such dominant parameters as superheating temperature, Nd:YAG laser power for preheating, substrate temperature, etc. The optimal conditions for successful selective infiltration of a single layer of microscopic metal powder were experimentally obtained

• Journal of the Korean Chemical Society
• /
• v.7 no.3
• /
• pp.207-210
• /
• 1963

"Astragalus Membranaceus Bunge", which is a medical herb, grows wild in Manchuria and Korea, is cultivated today in Korea. Any literature about the organic components of "Astragalus Membranaceus Bunge" has been extracted with methanol referring to a literature of "Panax Ginseng C.A. Meyer" and two kinds of colorless crystals were obtained. After recrystallization in absolute alcohol, the melting point has been measured. The one kind was $181-182^{\circ}C$ and the others, $184-186{\circ}C$ respectively. It does not contain nitrogen, sulfur and halogen. By Liebermann's reaction, the one kind was not a carbohydrate but might be a Saponin. Through paper chromatography, taste, melting point, spectrophotometry, and elemental analysis, it was concluded that the other was Sucrose. It has been notified that the compound can be crystallized at the proper temperature, purity, and concentration of the solution and also solvent system.

• Korean Journal of Veterinary Research
• /
• v.26 no.2
• /
• pp.225-228
• /
• 1986

Progesterone immunogen has been synthesized and its melting point, Rf-value, UV and IR spectrum have been measured to develope the essential step in antisera production against low molecular weight substance. Mixed anhydride reaction was used to conjugate $11{\alpha}$-hydroxy-progesterone with succinic anhydride. Melting point of one intermediate compound was $156^{\circ}C$, and Rf-value was 0.41 in benzene : acetone : methanol (5 : 5 : 2). Maximum absorbance was measured at 242nm and ${\varepsilon}$ was $1.641{\times}10^4cm^2/mole$. Loss of hydroxy group was observed at 3450nm, and carbonyl group was appeared at 1160nm, 1250nm and 2960nm. These results indicated that the intermediate compound was progesterone hemisuccinate. Maximum absorbance of progesterone bovine-serum albumin(BSA) conjugate was observed at 250nm. Molar ratio of progesterone to BSA was average 15.4 on UV spectrum.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.1
• /
• pp.35-37
• /
• 1998

This study was performed to investigate lipid content, melting point, refractive index, fatty acid composition and energy intake from lipid of commercial fried instant noodles. Sixty five samples were collected in Seoul area, and analyzed. The average of lipid content was 16.7%, melting point and refractive index were 29$^{\circ}C$ and 1.46, respectively. The fatty acid composition mainly consisted of C16:0, C18:1 and C18:2. The ratio of P/M/S in fried instant noodles was 0.19 : 0.77 : 1.00. The average energy intake from lipid of 100g fried instant noodles was 150.3kcal.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.23 no.2
• /
• pp.303-307
• /
• 1994

This study was carried out to investigate lipid content, melting point, refractive index and fatty acid composition of commercial chocolate and imitation chocolate. Fifty-eight samples for test were 45 of domestics and 13 of foreign in Seoul. The results were as follows ; Mean value of lipid content was 35.1% in chocolate and 31.9% in imitation chocolate, and foreigns were lower than domestics. In melting point of lipid, chocolates and imitation chocolate were 26.4$^{\circ}C$ and 27.4$^{\circ}C$ as mean value, respectively. Mean value of refractive index of lipid was 1.4560, imitation chocolate of domestic were lower than another. The fatty acid compositions were chiefly consisted of {{{{C_18:1 , C_18 , C_16, C_16:1 and C_18:2. }} The ratio of SFA : MUFA : PUFA in chocolate and limitation chocolate were 8.2 :6.9 :1.0 and 3.1 : 4.3: 1.0 , respectively.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.395-396
• /
• 2006

To manufacture a flange for a compressor with a relief groove by using powder metallurgy in order to prevent deformation to the compressor in operation, powder material for the flange is charged into a mold; an ablative member having a melting point lower than that of the powder material is positioned at a place where a relief groove is to be formed; the flange is formed by compressing the powder material and the ablative member; and the formed flange is sintered at a temperature between the melting point of the powder material and the ablative member so as to melt and remove the ablative member. It made according to the new method has more excellent strength and airtight property than the conventional one. It is analyzed that the ablative member is melted and penetrated into the flange structure during the sintering process, which results in improvement of the airtight property and increase of the strength.

• Proceedings of the KOSOMBE Conference
• /
• v.1996 no.05
• /
• pp.130-132
• /
• 1996

It is well known when porous calcium phosphate ceramics are used as a bone graft substitute, new tissues or blood vessels are grown into the porous implant due to their excellent biocompatibility. In this study, the ${\beta}$-crystalline form of calcium metaphosphate, $Ca(PO_{3})_{2}$ is prepared by the controlled thermolysis of monocalcium phosphate, $Ca(H_{2}PO_{4})_{2}$. The diameter of cylindrical pores formed during cooling was controlled by a holding time at the melting point of a monocalcium phosphate and by the change of a recrystallization temperature, to obtained the most appropriate size (about $200{\mu}m$) of pores. It was observed that the increasing holding time at the melting point of monocalcium phosphate results in the decreases of pore sizes.