• Polymer(Korea)
• /
• 제24권5호
• /
• pp.656-663
• /
• 2000

The Effects of thermal history during the melt spinning process on the mechanical properties and crystallinity of polylactic acid (PLLA) fibers have been studied. Thermal history applied on PLLA during the melt process caused the decrease of number-average molecular weights and this resulted in the lowering of orientation and crystallinity in PLLA fibers. As a result, the longer applied thermal history, the less tensile strength and modulus, and the higher elongation at break. It was also found that primary factor for controlling crystallinity of PLLA fiber was the stress induced crystallization while the thermal induced crystallization had a little effect on the crystallinity of PLLA fibers. However, the thermal induced crystallization turn out to be important in the crystallinity developed by annealing of PLLA fibers.

• Polymer(Korea)
• /
• 제38권4호
• /
• pp.518-524
• /
• 2014

Electrospinning has gained interests as a polymer processing technique for nanofiber fabrications. It is well known that both polymer solutions and polymer melts can be electrospun. Among them, melt electrospinning is environmentally friendly technique due to the absence of solvent. However, the diameter of melt-electrospun fibers is typically thicker than solution-electrospun fibers. By using a home-made melt-electrospinning device, micron-sized fibers with smooth and even surfaces were electrospun successfully. We demonstrate that low-density polyethylene fibers can be reduced in diameter with a viscosity-reducing additive such as low molecular weight polyethylene monoalcohol and polyethylene wax. The diameter was further reduced by blending it with oxidized polyethylene wax due to polarity increment. Additionally, parameters affecting the diameter were analyzed such as an applied voltage and a spinning distance.

• Polymer(Korea)
• /
• 제30권2호
• /
• pp.124-128
• /
• 2006

Heavy weight of the camouflage materials was always the main problem. To solve it, the low infrared emissivity fibers with the radar absorbing property (LIFR) were prepared. The low infrared emissivity fibers (LIF) were firstly melt-spun by co-extrusion of polypropylene (PP) and PP/various fillers master-batches using general conjugate spinning. The infrared emissivity of LW with AA and ZnO was decreased respectively compared with that of pure polypropylene fibers. The infrared emissivity of LIF with 15 wt% Al and 2 wt% ZnO in the sheath-part can reach 0.58. To improve LIF radar absorbing property, LIFR was prepared by filling the 50 wt% ferrite and bronze in the core-part of LIF. The radar absorbing efficacy of LIFR was good and the infrared emissivity was low. For the characterization, fiber electron intensity instrument and differential scanning calorimetry (DSC) were used for the analysis of mechanical properties, thermal and crystallization behavior of the spun-fibers. Scanning electron microscopy (SEM) was carried out to observe the particle distribution of the bicomponent fibers.

• Journal of Korea Foundry Society
• /
• 제9권1호
• /
• pp.73-79
• /
• 1989

Microstructural characteristics of Al-3.63wt.%Pb hyper-monotectic alloy rapidly-solidified by melt spinning were examined. Possibility of forming a planar liquid -solid interface during rapid solidification of this alloy was also considered with a morphological stability theory, and a mechanism of forming banded structure observed at the bottom parts of melt-spinned specimens was considered as well. Application of the absolute stability criterion predicts the liquid-solid interface of the primary aluminium phase to be able to maintain a planar interface during the early stage of rapid solidification. Formation of banded structure was supposed to be resulted from the release of latent heat during solidification, which affect the stability of a planar liquid-solid interface.

• Fibers and Polymers
• /
• 제4권4호
• /
• pp.210-214
• /
• 2003

Siloxylated polypropylene fibers composed of polypropylene (PP) and aluminosiloxane (AS) were prepared by melt blending followed by spinning. The effects of blend compositions on the thermal behaviors, surface and tensile properties of PP/AS blend fibers were investigated by DSC, WAXD, SEM, static honestometer, etc. The heat of fusion of PP/AS blends decreased with increasing AS contents. In addition, the peak intensity of PP/AS blends in X-ray diffraction patterns decreased with increasing AS contents. It was observed that the silicone molecules exist and well distribute on the surface of siloxylated polypropylene fibers. From the results of the half-life period measurements, the anti-static properties of PP fibers siloxylated with AS was found to be significantly modified.

• Textile Coloration and Finishing
• /
• 제9권2호
• /
• pp.17-24
• /
• 1997

PET/PHE blends were prepared by the mixing of poly(ethylene terephthalate) and poly(hydroxyether of bisphenol A) at melt state above PET melting temperature and modified PET fibers having less than 5 wt% of PHE were also prepared by the melt spinning of the PET/PHE blends. The PET/PHE blends were able to prepare by means of physical mixing concept, except the chemical interaction between hydroxyl groups of PHE and ester groups of PET. It has been revealed that the modified PET fibers have some hydrophilic properties such as low contact angle and easy-dyeable characters.

• Journal of Magnetics
• /
• 제4권3호
• /
• pp.76-79
• /
• 1999

We report results on metastable CuCo ribbons at low Co contents (2 and 10 at %), which were prepared by conventional melt-spinning technique and subsequent annealing. The properties of these materials cannot consistently be described by those of an assembly of superparamagnetic single-domain particles. Magnetic measurements related to magnetic dynamics reveal spin-glass-like properties. Especially, we find very slow nonequilibrium relaxation processes in Co10Cu90, which depend on prehistory, when probing the relaxation of the resistivity. The results are clear evidence for frustrated interaction effects due to magnetic couplings between Co clusters or precipitates in these alloys.

• Journal of Korea Foundry Society
• /
• 제19권5호
• /
• pp.433-439
• /
• 1999

Rapidly solidified Mg-Al-Si base alloys containing Ca were obtained by melt spinning. The melt-spun ribbons were aged isochronally or isothermally to investigate age hardening phenomena and microstructural change according to the alloy composition. Age hardening occurred after aging at $200^{\circ}C$ for 1h mainly due to the precipitation of $Al_2Ca$ and $Mg_2Ca$, which have coherent interfaces with the matrix. With the increase of Ca content, the hardness values of the alloy ribbons were increased. Among the alloys, Mg-10Al-2 Si-3Ca alloy showed a good thermal stability at elevated temperature.

• Proceedings of the Membrane Society of Korea Conference
• /
• 한국막학회 1998년도 추계 총회 및 학술발표회
• /
• pp.109-111
• /
• 1998

TIPS 공정에 의한 고분자막 제조기술은 기존의 적정용매가 없어서 분리막 소재로 상용할 수 없었던 결정성 고분자 및 고강도 엔지니어링 플라스틱 등에 대하여 소재의 폭을 넓힐 수 있고 적정 희석제와의 혼합으로 고분자 소재의 용융점을 강화 시킬 수 있어 가공온도의 제약을 어느정도 해결할 수 있다는 장점을 가지고 있다. 또한 TIPS 공정에 의해 제조되는 고분자 matrix, 혹은 고분자 막의 미세구조는 선택된 고분자와 희석제의 종류 및 상분리 mechanism에 따라 크게 달라지므로 이들 제조 변수의 적절한 조절을 할 수 있다. 본 연구에서는 열유도 상분리 공정과 연신공정을 통해 몇가지 제조변수를 조절하여 미세다공성 중공사막을 제조하였다. 고분자-희석제 용융액의 melt viscosity를 변화시켜 보았고, 희석제의 추출 후 열처리를 하여 이에 따른 영향을 알아보았다. 상분리 속도가 막의 구조 및 성능에 미치는 영향을 알아보기 위해 coagulation bath temperature를 변화시켜 보았으며, 몇가지 종류의 coagulant를 사용하여 막을 제조한 후 성능을 측정해 보았다. 또한 기존의 상업용 막과 성능 및 구조를 비교하여 보았다.

• Proceedings of the Korean Magnestics Society Conference
• /
• 한국자기학회 2003년도 somma/kms meeting
• /
• pp.141-141
• /
• 2003