• International Journal of Air-Conditioning and Refrigeration
• /
• 제10권1호
• /
• pp.31-39
• /
• 2002

Microencapsulated pcm (MPCM) particles are mixed with distilled water and utilized to evaluate its characteristics and performance as a thermal storage medium transporting heat. For the present study, tetradecane ($C_14$$H_30$, $T_m$=5.5$^{\circ}C$) is capsulated in the core, coated with the melamine for their surface. The size of particles is well-controlled under 10$\mu$m in the process of in-situ polymerization with melamine-formaldehyde resin. For the experiment, the concentractions of slurries are prepared for 20 wt%, 30 wt%, and 40 wt%. The results are compared with those of water and 100% tetradecane oil. The pure water and tetradecane start solidifying within 20 minutes after introducing cooling water into the thermal storage tank whose flow rates are varied by 125 cc/min, 250 cc/min, and 500 cc/min. However, MPCM slurries are required relatively longer period of time for their phase change than pure phase change materials. That is, the entrained MPCM particles restrict their heat transfer in terms of natural convection and conduction to them.

• 설비공학논문집
• /
• 제13권2호
• /
• pp.80-87
• /
• 2001

Microencapsulated PCM particles are mixed with distilled water and utilized to evaluate its characteristics and performance as a thermal storage medium transporting heat. For the present study, tetradecane(C$_14H_30, T_m=5.5^{\circ}C$) is capsulated in the core with the melamine of its surface. The size of particles is well-controlled under 10${\mu}{\textrm}{m}$ in the way of in-situ polymerization with melamine-formaldehyde resin. For the experiment, the concentrations of slurries are prepared for 20wt%, 30wt%, and 40wt%. The results are compared with those of water and 100% tetradecane oil. The pure water and tetradecane start solidifying within 20 minutes after introducing cooling water into the thermal storage tank whose tank whose flow rates are varied by 125cc/min, 250cc/min, and 500cc/min. However, MicroPCM slurries are required relatively longer period of time for their phase change than pure phase change materials. That is, the entrained MicroPCM particles control its heat transfer in terms of natural convection and conducting to them.

• 접착 및 계면
• /
• 제6권1호
• /
• pp.11-18
• /
• 2005

심물질(core)이 상변화물질(Phase Change Material, PCM)이고, 벽물질(shell)이 멜라민 포름알데히드 수지인 마이크로 캡슐을 제조하였다. 제조된 캡슐의 크기가 아크릴 코팅(acrylic coating)의 물성에 미치는 영향을 알아보기 위하여 PCM 캡슐의 크기를 $3{\sim}25{\mu}m$로 조절하여 제조하였다. 제조된 캡슐의 심물질 함량과 캡슐의 크기는 DSC와 SEM을 이용하여 확인하였다. 아크릴 에멀젼은 butyl acrylate, methyl metacrylate와 acrylic acid를 공중합하여 제조하였다. 제조된 PCM 캡슐과 아크릴 에멀젼을 혼합하여 필름으로 제조하였다. 캡슐의 크기가 작을수록 아크릴 코팅 필름 내에 캡슐이 잘 분산됨을 확인할 수 있었고, 캡슐의 크기가 클수록 필름 표면이 매끄럽지 않음을 관찰할 수 있었다. 필름의 수분 흡수율은 PCM 캡슐의 크기에 큰 영향을 받지 않았지만 필름의 인장 강도와 신율은 캡슐의 크기가 작을수록 증가하였다.

• Elastomers and Composites
• /
• 제48권3호
• /
• pp.232-240
• /
• 2013

자기치유형 아스팔트를 구현하기 위하여 치유제로 디메틸페놀을 사용하여 내부층을 이루고 바깥층이 멜라민 수지로 이루어진 마이크로켑슐을 제조하였다. 마이크로캡슐이 내재된 아스팔트는 일반 아스팔트에 비해 높은 기계적 성질을 나타내었다. 그대로 길어질수록 마이크로캡슐이 함유된 아스팔트는 함유되지 않은 아스팔트보다 더 높은 충격 강도를 나타내었으며 15일의 휴식기간에 최초의 물성을 회복하였다. 이는 X-선 사진에서 보듯이, 깨어진 아스팔트 경계면에 있던 마이크로캡슐이 아스팔트와 동시에 깨지면서 캡슐 안에 있던 단량체인 디메틸페놀이 흘러나와 외부의 반응촉매 투입 없이 아스팔트 자체의 금속촉매와 아민촉매 및 공기 중의 산소분자에 의하여 열가소성 고강성 플라스틱 고분자인 폴리페닐렌옥사이드가 자율적으로 중합되면서 깨어진 아스팔트의 경계면을 메우면서 최초의 물성으로 복구된 것이다. 이는 마이크로캡슐을 함유한 아스팔트는 자가복구능을 갖고 있음을 의미한다.

• Journal of the Korean Wood Science and Technology
• /
• 제34권2호
• /
• pp.37-45
• /
• 2006

The viscoelastic properties of blends of melamine-formaldehyde (MF) resin and poly(vinyl acetate) (PVAc) for engineered flooring used on the Korean traditional ONDOL house floor heating system were investigated by dynamic mechanical thermal analysis (DMTA). Because MF resin is a thermosetting adhesive, the effect of MF rein was shown across all thermal behaviors. The addition of PVAc reduced the curing temperature. The DMTA thermogram of MF resin showed that the storage modulus (E') increased as the temperature was further increased as a result of the cross-linking induced by the curing reaction of the resin. The storage modulus (E') of MF resin increased both as a function of increasing temperature and with increasing heating rate. From isothermal DMTA results, peak $T_{tan{\delta}}$ values, maximum value of loss modulus (E") and the rigidities (${\Delta}E$) of MF/PVAc blends at room temperature as a function of open time, peak $T_{tan{\delta}}$ and maximum loss modulus (E") values were found to increase with blend MF content. Moreover, the rigidities of the 70:30 and 50:50 MF/PVAc blends were higher than those of the other blends, especially of 100% PVAc or MF. We concluded that blends the MF/PVAc blend ratios correlate during the adhesion process.

• 한국구조물진단유지관리공학회 논문집
• /
• 제23권4호
• /
• pp.31-36
• /
• 2019

콘크리트는 일반적으로 구조물에 활용되는 재료로써 다양한 환경조건에 노출된다. 특히 물과 같은 매체를 통해 콘크리트에 유해한 인자가 유입되므로 많은 피해를 야기 시킨다. 이에 콘크리트 내구성을 높이기 위해 많은 재료가 개발되고 있는 실정이다. 그중에 실란과 실록산 화합물은 흡수방지제로 활용도가 높은 재료로 알려져 있다. 그러나 노후화되거나 열화된 콘크리트에 처리할 경우 기재 자체가 약해 쉽게 박리되어 그 기능을 상실하는 문제점이 있다. 그래서 본 연구에서는 실록산 화합물로 표면 처리된 멜라민-포름알데히드 수지를 활용해 콘크리트에 흡수방지제 효과와 동시에 표면강화 성능을 부여하기 위한 실험을 진행하였고, 이를 확인하기 위해 콘크리트의 기공률 및 표면경도 특성을 연구하였다.

• 한국의류학회지
• /
• 제13권3호
• /
• pp.242-251
• /
• 1989

The purpose of this study was to investigate the changes in easy-care and strength properties of the wet fixation processed viscose rayon fabrics. Rayon fabrics were treated with mixed resins of melamine formaldehyde (MF) and DMDHEU by one bath and two bath wet fixation processes. The MF/DMDHEU mixed resin concentrations were 50/100, 50/150, 100/100, 100/150 and 150/100(g/1). Magnasium chloride was used as a catalyst. Treated fabrics were evaluated by nitrogen content, DP rating, wrinkle recovery angle, breaking strength, tearing strength and abrasion resistance. The properties were compared to the fabrics treated by conventional Pad-Dry-Cure (PDC) method. Wet fixation processed fabrics showed DP ratings of higher than 3 and higher than 275 degrees of wrinkle recovery angles in all the mixed resin concentrations. Wet fixation processed fabrics showed increase in breaking strength and tearing strength but decrease in abrasion resistance. However, the decrease in abrasion resistance was much less than the conventional PDC treated fabrics. The one bath wet fixation processed fabrics showed better physical properties than the two bath processed fabrics in general. The optimum treatment condition was the mixed resin concentration of MF/DMDHEU, 100/100 g/l in one bath wet fixation process.

• 한국해양공학회지
• /
• 제31권3호
• /
• pp.241-247
• /
• 2017

Plywood, which is created by bonding an odd number of thin veneers perpendicular to the grain orientation of an adjacent layer, was developed to supplement the weak points such as contraction and expansion of conventional wood materials. With structural merits such as strength, durability, and good absorption against impact loads, plywood has been adopted as a structural material in the insulation system of a membrane type liquefied natural gas (LNG) carrier. In the present study, as an attempt to resolve recent failure problems with plywood in an LNG insulation system, conventional PF (phenolic-formaldehyde) resin plywood and its alternative MUF (melamine-urea-formaldehyde) resin bonded plywood were investigated by performing material bending tests at ambient ($20^{\circ}C$) and cryogenic ($-163^{\circ}C$) temperatures to understand the resin and grain effects on the mechanical behavior of the plywood. In addition, the failure characteristics of the plywood were investigated with regard to the grain orientation and testing temperature.

• Journal of the Korean Wood Science and Technology
• /
• 제45권6호
• /
• pp.787-796
• /
• 2017

A low dimensional stability and poor bending strength properties were main problems in particleboard manufacturing. The objective of this research was to evaluate the effect of mixed wood species and urea-formaldehyde (UF) or urea-melamine-formaldehyde (UMF) resins on the physical and mechanical properties of three-layer particleboards. The ratio of face/core/back layer was 1 : 2 : 1. The resin content of 12% for both UF resins and UMF resins (UF/MF = 70/30% w/w) was used. The results of this study showed that the utilization of S.mahagony shaving using both UF and UMF resins caused a decrease in the thickness swelling and water absorption of the boards. Thickness swellings of particleboard made of Sengon/Sengon/Sengon (SSS), Mahogany/Mahogany/Mahogany (MMM), Sengon/Mahogany/Sengon (SMS), and Mahogany/Sengon/Mahogany (MSM) were in the range of 23%, 12~16%, 14~16%, and 13~21%, respectively. The board bonded with UMF resin demonstrated better dimensional stability than that bonded with UF resin alone. Modulus of elasticity (MOE) and modulus of rupture (MOR) of particleboards made of S. mahagony shaving in the surface layer in both MMM and MSM boards were better than those of the SSS and SMS. MOE of MMM and MSM board was in the ranges of 24,000 to $26,000kg.cm^{-2}$ and 18,000 to $21,000kg.cm^{-2}$ respectively. Meanwhile, the MOR of board was in the ranges of 200 to $240kg.cm^{-2}$ and 190 to $228kg.cm^{-2}$, respectively.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2008년도 제38차 학술발표대회
• /
• pp.31-33
• /
• 2008

The study related that Red Phosphorus is surface coated by Al(OH)$_3$ using the proportion 1:1, 1:3, 1:5 respectively, and then take the coated red phosphorus as the core material, at the same time, use Melamine-Formaldehyde resin as the capsule materials for microcapsule processing. According to the TG analysis, the coated red phosphorus with the proportion 1:3 has the tiptop temperature of thermal decomposition, it reaches 376.20^{\circ}C$$. The same to the ratio of burning incomplete carbon it reaches 26.5%. The lowest moisture absorption ratio of the red phosphorus that used coated red phosphorus for microcapsule processing can reach 0.5% with the condition that thermal decomposition temperature decline 3.6%.