• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.11
• /
• pp.1523-1528
• /
• 2000

Four Suffolk ewes were used in Latin Square switch over design to study the effects of varying levels and sources of protein on heat production and thermoregulatory responses at daytime high ($33^{\circ}C$ temperature. They were fed Italian ryegrass hay supplemented with fishmeal and/or urea, providing three different levels of crude protein (CP) (low/unsupplemented: 7.9, medium: 11.6, and high: 15.8%) at $1.5{\times}maintenance$. Feeds were distributed at 0900 (30%) and 1700 (70%). Urea diet caused higher heat production and increased vaginal temperature compared to fishmeal and fishmeal-urea mix diets. Time spent standing, skin temperature and respiration rate of sheep fed urea were similar with those of sheep fed fishmeal. Sheep fed diet with low CP level had higher heat production, increased vaginal and skin temperature than sheep fed diet with medium CP content. Sheep on high CP diet produced significantly more heat than sheep fed medium CP diets. Their vaginal temperatures were similar with those of sheep fed medium CP diet but lower than those of sheep fed low CP diet. Respiration rates of sheep and time spent by them for standing on all diets did not differ significantly. These results suggest that urea is inferior protein supplement for thermoregulation of animal at hot environment, as it induced higher heat production than fishmeal and fishmeal-urea mix. Thermoregulatory response on fishmeal-urea mix diet was similar to fishmeal diet. Increasing CP of the diet from low to medium gives advantage for thermoregulation of animal. Increasing CP further to high level was not beneficial as it resulted in the responses of sheep similar to those on low protein diet.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.04a
• /
• pp.68-73
• /
• 2011

An experimental study was conducted to investigate the thermal performance of a medium-temperature heat pipe against the charge amount of working fluid. The container and the wick of the heat pipe were made of stainless steel and the working fluid was Dowtherm-A for medium-temperature applications around $250^{\circ}C$. The diameter and length of the heat pipe were 25.4 mm and 1 m, respectively. The maximum thermal load was 1 kW and the working fluid charge ratio varied from 372% to 420%. The results showed that the thermal resistance ranged from 0.12 to $250^{\circ}C/W$ and the effective thermal conductance ranged from 7,703 to $8,898 W/m{\cdot}K$. Dry-out occurred for the heat pipe with 372% fill-charge at the heat load of 950 W, while the other heat pipes with higher charge amount did not encounter dry-out up to 1060 W.

• Journal of applied mathematics & informatics
• /
• v.42 no.3
• /
• pp.607-623
• /
• 2024

This article studies the effects of heat generation/absorption and thermal radiation on the unsteady magnetohydrodynamic (MHD) Casson fluid flow past a vertical plate through rotating porous medium with constant temperature and mass diffusion. It is assumed that the plate temperature and concentration level are raised uniformly. For finding the exact solution, a set of non-dimensional partial differential equations is solved analytically using the Laplace transform technique. The influence of various non-dimensional parameters on the velocity are discussed, including the effects of the magnetic parameter M, heat generation/absorption Q, thermal radiation parameter R, Prandtl number Pr, Schmidt number Sc, permeability of porous medium parameter, Casson fluid parameter γ, on velocity, temperature, and concentration profiles, which are discussed through several figures. It is found that velocity, temperature, and concentration profiles in the case of heat generation parameter Q, Casson fluid parameter γ, thermal Grashof number Gr, mass Grashof number Gc, Permeability Porous medium parameter K, and time t have retarding effects. It is also seen that the magnetic field M, Thermal Radiation parameter R, Prandtl field Pr, Schmidt number Sc have reverse effects on it.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.3
• /
• pp.146-151
• /
• 2015

The heat transfer performance of heating medium oil fluidized bed heat exchanger was measured. The operation variables were air flow rate, air inlet temperature, moisture content, water flow rate and water inlet temperature. The outside heat transfer coefficient was determined from the heat exchanger experiment and its experimental correlation was determined as a function of air velocity and viscosity of heating medium oil. Effect of viscosity was well agreed with the previous studies. Errors of the correlation equation was less than about 10% for outside heat transfer coefficient developed in this study when compared with the measured value. Hot water with the temperature greater than $77^{\circ}C$ could be produced by using the heating medium oil fluidized bed heat exchanger.

• Environmental Engineering Research
• /
• v.25 no.4
• /
• pp.554-560
• /
• 2020

This study focuses on nitrification through a biological aerated filter (BAF) that is filled with a zeolite medium at low concentrations of ammonia. The zeolite medium consists of natural zeolite powder. The BAF is operated under two types of media, which are a ball-type zeolite medium and expanded poly propylene (EPP) medium. Nitrification occurred in the zeolite BAF (ZBAF) when the influent concentration of ammonia nitrogen was 3 mg L-1, but the BAF that was filled with an EPP medium did not experience nitrification. The ammonia nitrogen removal efficiency of ZBAF was 63.38% and the average nitrate nitrogen concentration was 1.746 mg/L. The ZBAF was tested again after a comparison experiment to treat pond water, and municipal wastewater mixed pond water. The ZBAF showed remarkable ammonia-nitrogen treatment at low concentration and low temperature. During this period, the average ammonia nitrogen removal efficiency was 64.56%. Especially, when water temperature decreased to 4.7℃, ammonia nitrogen removal efficiency remained 79%. On the other hand, the chemical-oxygen demand (COD) and phosphorus-removal trends were different. The COD and phosphorus did not show as efficient treatment as the ammonia-nitrogen treatment.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1995.05a
• /
• pp.213-222
• /
• 1995

Korean traditional Ondol with the sensible heat storage medium has been for a long time used as residential heating system, in these days the concrete Ondol without the heat storage medium was realized as the heating system in the private houses and the apartments. This floor heating system is good for our health. But the concrete Ondol is not desirable for the energy saving and for the maintenance of comfortable room temperature because the heat storage medium is not employed in the concrete Ondol. And as the hot water circulating pipes ate buried under the the concrete floor, the concrete Ondol system has some kind of problems to be improved. Therefore the new type of Ondol system was developed in this study. And the new Ondol was consisted of latent heat storage material as heat storage medium with a great heat capacity and bioceramics as medium to maintain comfortable room temperature. In this study, the heat transfer characteristics of latent heat storage-bioceramic Ondol was analyzed theoretically.

• Journal of Advanced Marine Engineering and Technology
• /
• v.24 no.4
• /
• pp.526-534
• /
• 2000

In this study, the characteristics of exhaust emissions in medium speed diesel engine under various operating conditions were investigated through experiments to derive the optimum conditions for minimizing the exhaust emissions, especially, nitrogen oxides. The 355 KW$\times$1200 rpm medium speed diesel engine was intensively examined to investigate the trend of exhaust emissions in case that the parameters affecting combustion conditions such as fuel injection timing, intake air temperature and pressure, engine speed and load were changed. The exhaust emissions for 9 sets of medium speed diesel engine were analyzed in addition. From this study, NOx level could be reduced by 30~50% through the adjustment of retarded fuel injection timing, lowered intake air temperature and increased charging air pressure.

• Journal of Energy Engineering
• /
• v.28 no.1
• /
• pp.30-36
• /
• 2019

The military has developed and operated a variety of military vehicles. Among them, medium tactical vehicles are developed as vehicles suitable for transporting troops, replacing existing military trucks, which have a significant impact on infantry forces' combat capability. Applying technology to increase fuel efficiency to these critical weapons systems, medium tactical vehicles, increases the distance range, which can reduce effective operational performance and oil costs. In this study, a measure was taken to improve the distance range of Medium Tactical Vehicles by applying an oil temperature control strategy to increase fuel efficiency.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1992.05b
• /
• pp.156-157
• /
• 1992

• Korean Journal of Animal Reproduction
• /
• v.21 no.3
• /
• pp.287-292
• /
• 1997

This study was carried out to investigate the effects of concentration and kinds of cryoprotectants, equilibraction time, thawing temperature and time, sucrose concentration on the survival rates of frozen bovine demi-embryos. The bovine demi-embryos following dehydration by cryoprotectants a various concentration of sucrose were freezed by cell freezer and thawed in 3$0^{\circ}C$ water bath. Survival and in vitro developmental rates was defined as development rates on in vitro culture or FDA-test. The results are summarized as follows : 1. The high survival rates of demi-embryos after frozen-thawing in freezing medium was attained 2.0M glycerol. The high survival rates of demi-embryos after frozen-thawing in freezing medium was obtained using single cryoprotectant(25.0~30.0%) than mixed cryoprotectants(16.7~19.0%). 2. The survival rates of demi-embryos after frozen-thawing in freezing medium added 1.5M, 2.0M glycerol＋0.25M sucrose(37.5~33.3%) were higher survival rates than those of sucrose concentration of 0.50, 0.75M(12.5~26.7%). 3. The equilibration time on the survival rates of demi-embryos was attained after short period of time(30.0~35.0%) in the freezing medium higher than long period of time(21.1%). 4. The thawing temperature on the survival rates of demi-embryos was attained at 3$0^{\circ}C$ of thawing temperature(26.7~40.0%) higher than $25^{\circ}C$ or 37$^{\circ}C$ of thawing temperature(13.3~20.0%). 5. The thawing time on the survival rates of demi-embryos was attained at 1~5 minutes of thawing time(26.7~33.3%) in the freezing medium higher than 10 minutes of thawing time(13.3~18.8%).