• Structural Engineering and Mechanics
• /
• 제73권4호
• /
• pp.437-445
• /
• 2020

The microstructure and mechanical properties of concrete will degrade significantly at high temperatures, thus affecting the bond strength between reinforcing steel and surrounding concrete in reinforced concrete members. In this study, the effect of individual and hybrid fiber on the local bond-slip behavior of lightweight aggregate concrete (LWAC) after exposure to elevated temperatures was experimentally investigated. Tests were conducted on local pullout specimens (150 mm cubes) with a reinforcing bar embedded in the center section. The embedment lengths of the pullout specimens were 4.2 times the bar diameter. The parameters investigated included concrete type (control group: ordinary LWAC; experimental group: fiber reinforced LWAC), concrete strength, fiber type, and targeted temperature. The test results showed that for medium-strength LWACs exposed to high temperatures, the use of only steel fibers did not significantly increase the residual bond strength. Moreover, the addition of individual and hybrid fiber had little effect on the residual bond strength of the high-strength LWAC after exposure to a temperature of 800℃.

• Journal of Plant Biotechnology
• /
• 제36권1호
• /
• pp.1-6
• /
• 2009

MS배지와 PM (Potato medium)배지 (MS배지에서 $NH_4NO_3$ 와 $KNO_3$의 양은 1/2, $CaCl_2$는 2배 첨가하고 나머지는 동일)에서 대서, 자심, 추백, 하령 4 품종 감자줄기의 기내 대량증식을 위해 실험하였다. 고체배지에서 배양초기 ($1{\sim}2$주)에 대서와 자심은 MS배지에서 줄기의 신장이 가장 우수하였고, 하령과 추백은 PM배지가 효과적이었지만 배양후기인 4주 째에는 두 배지 사이에 차이가 없었다. 액체 정치배양한 배지에서는 고체배지와 달리 배양초기에는 생장이 늦었고 배양 1주 후부터 감자 (4 cm 이상)줄기 발생률이 급격히 증가하기 시작하였고, 4주까지 꾸준히 생장을 지속하였다. 바이오리액터에서 줄기의 생장은 품종에 따라 차이를 보였다. 특히 추백과 자심은 액아 발생뿐만 아니라 줄기신장이 1/4 PM배지가 우수하였고, 대서는 1/2 PM배지에서 액아발생이 왕성하였다. 한편, 하령은 다른 품종에 비해 생장이 늦었다.

• Journal of Plant Biotechnology
• /
• 제6권1호
• /
• pp.55-61
• /
• 2004

Callus induction and somatic embryogenesis are fundamental to cotton tissue culture biotechnology. An efficient protocol for callus induction, somatic embryogenesis and their maturation have been developed to regenerate plantlets from cotton (Gossypium hirsutum L.) variety coker 312. Embryogenic callus was initiated from hypo-cotyl region that was used as an explant at seedling stage when it was about 7-8 days old. Callus induction was achieved through culturing hypocotyls (5-7mm) on $MS_{1a} medium supplemented with 2,4-D (0.1 mg/L) and KT (0.5 mg/L) for six weeks. A friable, colorless, bulky and well proliferating callus becomes greenish with the addition of NAA (2.0 mg/L), ZT (0.1 mg/L) and removal of 2,4-D (M $S_{1b}$) cultured for two weeks then again transferred to $MS_{1a}. 2,4-dichlorophenoxyacetic acid (2,4-D) promoted the proliferation of embryogenic callus, but had a negative effect on the differentiation and germination of somatic embryos. ZT (0.1mg/L) and activated charcoal (2g/L), both hormones play an important role in differentiation and germination of somatic embryos in hypocotyls derived embryogenic callus but in case of cotton, such a capability have been observed on MS medium with 1.92 g/L $KNO_3$, but it is considered to attain somewhat more improvement. High embryogenesis frequency was achieved through nutrient deficient stress treatment. The frequency of globular embryogenesis (two-three folds) was achieved when well proliferating callus was (from $MS_{1a}$ media) cultured on MS (1/5 strength) medium for four weeks. Here the development of anthocyanins is the best indicator for somatic embryogenesis. However, when embryoid callus was cultured on MS (full strength) medium, the globular embryos were developed into normal plantlets immediately. In this procedure 27.49% cotyledenary embryos were developed. Of that 70% cotyledenary embryos were developed not only into normal plantlets but rooted simultaneously, when cultured on MS (with 0.05 mgg/L giberrelic acid) medium. So complete plants could be regenerated through somatic embryogenesis from hypocotyl explants within 6 months.s.

• Journal of Plant Biotechnology
• /
• 제39권3호
• /
• pp.182-188
• /
• 2012

Iris dichotoma Pall. is an important endangered plant belonging to the family Iridaceae. A method was developed for the rapid micropropagation of I. dichotoma through plant regeneration from leaf, rhizome, and root explant-derived calli. Leaf, rhizome, and root segments were cultured on Murashige and Skoog (MS) medium supplemented with 2,4-dichlorophenoxy acetic acid (2,4-D; $0-3.0mg{\cdot}L^{-1}$) for callus induction. Callus production was highest at $1.0mg{\cdot}L^{-1}$ 2,4-D, where 73.8% and 45.5% of cultured rhizome and root cuttings, respectively, produced calli. The viable calli were maintained at an induced concentration of 2,4-D ($3.0mg{\cdot}L^{-1}$). They were then transferred to MS medium supplemented with various concentrations of 2,4-D ($0-3.0mg{\cdot}L^{-1}$) in combination with 6-benzyladenine (BA: 0, 1.0 and $3.0mg{\cdot}L^{-1}$) for adventitious shoot regeneration. The addition of a low concentration of 2,4-D into BA-containing medium significantly increased the frequency of shoot regeneration in leaf, rhizome, and root-derived calli. The highest number of adventitious shoots (26.4 per callus) formed at $0.5mg{\cdot}L^{-1}$ 2,4-D and 1.0 mg/l BA. For rooting of the shoots, half- strength MS medium supplemented with different concentrations of indole 3-butyric acid (IBA) $0-3.0mg{\cdot}L^{-1}$ was tested. The optimal results were observed using half-strength MS medium supplemented with $1.0mg{\cdot}L^{-1}$ IBA, on which 98% of the regenerated shoots developed roots with an average of 3.5 roots per shoot within 45 days. The plantlets raised in vitro were acclimatized and transferred to soil with 95% success. This in vitro propagation protocol will be useful for conservation and mass propagation of this endangered plant.

• Environmental Analysis Health and Toxicology
• /
• 제13권3_4호
• /
• pp.133-142
• /
• 1998

Effects of phosphorous (P) and methylglyoxal (MG) on the cell number, dry weight, chlorophyll content, photosynthetic and respiratory rate, phosphate uptake and protein content of green algae (Scenedesrnus obliquus) were studied. The algal cell number from the medium treated with 0.5-1.0 mM of MG at 1/2 P or 1/4 P concentration was significantly lower than those of algae treated :with full strength of phosphrous in medium. The inhibitory effect of MG on algal cell division was enhenced at low concentration of phosphorous in medium. At the beginning of logrithmic phase of algal growth, the mean dry weight of algae from the medium without MG-treatment in 1/2 P media was significantly higher than that of algae treated with MG. After logrithmic phase of growth cycle, the mean dry weight of algae from the medium with 1.0 mM of MG-treatment in 1/4 P media was significantly lower than that of algae treated with or without MG. At logrithmic phase of algal growth, there were significant differences in the chlorophyll content among all groups of tested algae with various concentrations of P and MG. At 15 days after inoculation, the mean chlorophyll content per algal cell from the media without MG-treatment in 1/2P was significantly higher than that of other cells from MG-treated media. The adverse effect of MG at concentration of 0.5-1.0mM in 1/2 and 1/4 P media on photosynthetic rate was observed. The mean photosynthetic rate of algal cell without P and MG treatment at 15 days after inoculation was significantly higher than that of MGtreated algae. After logarithmic phase, the algal cell treated with 0.5mM of MG with full strength of phosphorous showed significantly high respiratory rate than that of other cell groups. There were significant differences in mean phosphate uptake rate among all groups of Scenedesmus obliquus at logarithmic phase. At 12 days after inoculation, phosphate uptake rate per each algal cell from the basic media without MG and P treatment was rapidly reduced which shows early introduction to stationary phase.

• 식물조직배양학회지
• /
• 제28권5호
• /
• pp.239-242
• /
• 2001

액체배지 첨가가 L. oriental hybrid 'Casa Blanca'의 자구비대 촉진에 미치는 영향을 조사하였다. MS기본배지에 활성탄 1 g/L과 sucrose 60g/L가 첨가된 배지에서 저반부가 비대된 자구절편체 (7 mm$\times$12 mm)를 2개월간 암배양한 후에 액체배지를 동일용기에 첨가하여 자구비대를 현저하게 촉진시켰다. 첨가된 액체배지는 2배의 MS배지 염류농도에 sucrose 120g/L가 첨가된 배지 25 mL를 첨가하는 것이 자구비대에 효과적이었다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2002년도 춘계 학술발표회 논문집
• /
• pp.306-316
• /
• 2002

This paper summarizes the results of full-scale cyclic seismic testing on four RBS (reduced beam section) steel moment connections. Key test variables were web bolting vs. welding and strong vs. medium PZ (panel zone) strength. The specimen with medium PZ strength was specially designed to mobilize energy dissipation from both the PZ and RBS region in a balanced way; the aim was to reduce the requirement of expensive doubler plates. Both strong and medium PZ specimens with web-welding were able to provide sufficient connection rotation capacity required of special moment frames, whereas specimens with web-bolting showed inferior performance due to the premature brittle fracture of the beam flange across the weld access hole. In contrast to the case of web-welded specimens, the web-bolted specimens could not transfer the actual plastic moment of the original (or unreduced) beam section to the column. If a quality welding for the beam-to-column joint is made as in this study, the fracture-prone area tends to move into the beam flange base metal within the weld access hole. Analytical study was also conducted to understand the observed base metal fracture from the engineering mechanics point of view.

• Journal of the Korean Wood Science and Technology
• /
• 제45권4호
• /
• pp.444-455
• /
• 2017

This study was conducted to evaluate the effect of panel density and resin content on properties of medium density fiberboard (MDF) to obtain some insights on MDF properties as a function of panel density and resin content. MDF panels with different panel densities such as 650, 700, 750 and $800kg/m^3$ were manufactured by adjusting the amount of wood fibers in the mat forming. MDF panels were also fabricated by spraying 8, 10, 12, and 14% of urea-formaldehyde (UF) resins onto wood fibers in a drum-type mechanical blender to fabricate MDF panels with a target density of $650kg/m^3$. As the panel density and resin content increased, the internal bonding (IB) strength of MDF panel consistently increased. Modulus of rupture (MOR), modulus of elasticity (MOE) and screw withdrawal resistance (SWR) had a similar trend to the IB strength. In physical properties, thickness swelling (TS) and water absorption (WA) decreased with an increase in both panel density and resin content. In addition, the formaldehyde emission (FE) which increased as the panel density and resin content became greater. In overall, the panel density of MDF had more significant effect than the resin content in all properties of MDF panels, indicating that it was better to adjust the panel density rather than the resin content for MDF manufacture.

• Plant Biotechnology Reports
• /
• 제4권2호
• /
• pp.129-138
• /
• 2010

An efficient transformation system for high-throughput functional genomic studies of kiwifruit has been developed to overcome the problem of necrosis in Actinidia arguta explants. The system uses Agrobacterium tumefaciens strain EHA105 harbouring the binary vector pART27-10 to inoculate leaf strips. The vector contains neomycin phosphotransferase (nptII) and ${\beta}$-glucuronidase (GUS) (uidA) genes. A range of light intensities and different strengths of Murashige and Skoog (MS) basal salt media was used to overcome the problem of browning and/or necrosis of explants and calli. Callus browning was significantly reduced, resulting in regenerated adventitious shoots when the MS basal salt concentration in the culture medium was reduced to half-strength at low light intensity ($3.4\;{\mu}mol\;m^{-2}\;s^{-1}$) conditions. Inoculated leaf strips produced putative transformed shoots of Actinidia arguta on half-MS basal salt medium supplemented with 3.0 $mg\;l^{-1}$ zeatin, 0.5 $mg\;l^{-1}$ 6-benzyladenine, 0.05 $mg\;l^{-1}$ naphthalene acetic acid, 150 $mg\;l^{-1}$ kanamycin and 300 $mg\;l^{-1}$ $Timentin^{(R)}$. All regenerated plantlets were deemed putativ transgenic by histochemical GUS assay and polymerase chain-reaction analysis.

• International Journal of Advanced Culture Technology
• /
• 제8권3호
• /
• pp.334-341
• /
• 2020

Through a investigation of the physical activity status of 1794 undergraduates who were non-sports majors from freshman to senior in Jiangxi Normal University, to analyze physical fitness status of college students with different physical activity levels. The results showed that in physical activity, high-intensity physical activity of male was higher than female, while medium-intensity and low-intensity (insufficient) physical activity of female was higher than male. College students' high-intensity physical activity group's physical test scores were better than the medium-intensity physical activity group, and the medium-intensity physical activity group was superior to the low physical activity group. In terms of physical fitness, among the test indicators of body shape and physiological function, the vital capacity and body mass index of male and female were ranked at a pass level. In the physical fitness test indicators, the performance of college students' endurance qualities was better while the overall performance of strength qualities was lower. The overall fitness of college students was ranked at a pass level, and the physical test scores of female were better than male.