Browse > Article
http://dx.doi.org/10.12989/sem.2020.73.4.437

Local bond-slip behavior of fiber reinforced LWAC after exposure to elevated temperatures  

Tang, Chao-Wei (Department of Civil Engineering & Geomatics, Cheng Shiu University)
Publication Information
Structural Engineering and Mechanics / v.73, no.4, 2020 , pp. 437-445 More about this Journal
Abstract
The microstructure and mechanical properties of concrete will degrade significantly at high temperatures, thus affecting the bond strength between reinforcing steel and surrounding concrete in reinforced concrete members. In this study, the effect of individual and hybrid fiber on the local bond-slip behavior of lightweight aggregate concrete (LWAC) after exposure to elevated temperatures was experimentally investigated. Tests were conducted on local pullout specimens (150 mm cubes) with a reinforcing bar embedded in the center section. The embedment lengths of the pullout specimens were 4.2 times the bar diameter. The parameters investigated included concrete type (control group: ordinary LWAC; experimental group: fiber reinforced LWAC), concrete strength, fiber type, and targeted temperature. The test results showed that for medium-strength LWACs exposed to high temperatures, the use of only steel fibers did not significantly increase the residual bond strength. Moreover, the addition of individual and hybrid fiber had little effect on the residual bond strength of the high-strength LWAC after exposure to a temperature of 800℃.
Keywords
fiber reinforced lightweight aggregate concrete; residual bond strength; pullout test;
Citations & Related Records
Times Cited By KSCI : 11  (Citation Analysis)
연도 인용수 순위
1 ASTM C150/C150M-15 (2015), Standard Specification for Portland Cement, ASTM International, West Conshohocken, PA, www.astm.org.
2 ASTM C33/C33M-13 (2013), Standard Specification for Concrete Aggregates, ASTM International, West Conshohocken, PA, www.astm.org.
3 Bilek, V., Bonczkova, S., Hurta, J., Pytlik, D. and Mrovec, M. (2017), "Bond strength between reinforcing steel and different types of concrete", Procedia Eng., 190, 243-247. https://doi.org/10.1016/j.proeng.2017.05.333.   DOI
4 Bilodeau, A., Kodur, V.K.R. and Hoff, G.C. (2004), "Optimization of the type and amount of polypropylene fibres for preventing the spalling of lightweight concrete subjected to hydrocarbon fire", Cement Concrete Compos., 26, 163-174. https://doi.org/10.1016/S0958-9465(03)00085-4.   DOI
5 Campione, G., Cucchiara, C., Mendola, L.L. and Papia, M. (2005), "Steel-concrete bond in lightweight fiber reinforced concrete under monotonic and cyclic actions", Eng Struct, 27, 881-890. https://doi.org/10.1016/j.engstruct.2005.01.010.   DOI
6 Chandra, S. and Berntsson, L. (2002), Lightweight Aggregate Concrete, Noyes Publications, New York, U.S.A.
7 Choi, J.I., Lee, B.Y. (2015), "Bonding properties of basalt fiber and strength reduction according to fiber orientation", Materials, 8(10), 6719-6127. https://doi.org/10.3390/ma8105335.   DOI
8 Dehestani, M., MoU.S.Avi, S.S. (2015), "Modified steel bar model incorporating bond-slip effects for embedded element method", Construct. Build Mater., 81, 284-290. https://doi.org/10.1016/j.conbuildmat.2015.02.027.   DOI
9 Ding, Y. and Kusterle, W. (2000), "Compressive stress-strain relationship of steel fibrereinforced concrete at early age", Cem Concr Res, 30, 1573-1579. https://doi.org/10.1016/S0008-8846(00)00348-3.   DOI
10 Deng, Z.C., Jumbe, R.D., Yuan, C.X. (2014), "Bonding between high strength rebar and reactive powder concrete", Comput. Concrete, 13(3), 411-421. https://doi.org/10.12989/cac.2014.13.3.411.   DOI
11 Ding, Y., Azevedo, C., Aguiar, J.B., Jalali, S. (2012), "Study on residual behaviour and flexural toughness of fibre cocktail reinforced self compacting high performance concrete after exposure to high temperature", Construct. Build Mater., 26, 21-31. https://doi.org/10.1016/j.conbuildmat.2011.04.058.   DOI
12 Gao, J., Suqa, W. and Morino, K. (1997), "Mechanical properties of steel fiber-reinforced, high-strength, lightweight concrete", Cem Concr Compos, 19, 307-313. https://doi.org/10.1016/S0958-9465(97)00023-1.   DOI
13 Golafshani, E.M., Rahai, A., Kebria, S.S.H. (2014), "Prediction of the bond strength of ribbed steel bars in concrete based on genetic programming", Computers & Concrete, 14(3), 327-359. https://doi.org/10.12989/cac.2014.14.3.327.   DOI
14 Kurugol, S., Tanacan, L. and Ersoy, H.Y. (2008), "Young's modulus of fiber-reinforced and polymer-modified lightweight concrete composites", Constr Build Mater, 22, 1019-1028. https://doi.org/10.1016/j.conbuildmat.2007.03.017.   DOI
15 Hassanpour, M., Shafigh, P. and Mahmud, H.B. (2012), "Lightweight aggregate concrete fiber reinforcement - A review", Construct. Build Mater., 37, 452-461. https://doi.org/10.1016/j.conbuildmat.2012.07.071.   DOI
16 Hossain, K.M.A. (2008), "Bond characteristics of plain and deformed bars in lightweight pumice concrete", Constr. Build. Mater., 22, 1491-1499. https://doi.org/10.1016/j.conbuildmat.2007.03.025   DOI
17 Kim, N.W., Lee, H.H., Kim, C.H. (2016), "Fracture behavior of hybrid fiber reinforced concrete according to the evaluation of crack resistance and thermal", Comput. Concrete, 18(5), 685-696.
18 Ko, J., Ryu, D., Noguchi, T. (2011), "The spalling mechanism of high-strength concrete under fire", Mag. Concr. Res., 63(5), 357-370. http://dx.doi.org/10.1680/macr.10.00002.   DOI
19 Kodur, V. (2014), "Properties of concrete at elevated temperatures", ISRN Civil Engineering, 1-15. https://doi.org/ 10.1155/2014/468510.
20 Lee, H.H., Yi, S.T. (2016), "Structural performance evaluation of steel fiber reinforced concrete beams with recycled aggregates", Comput. Concrete, 18(5), 741-756. https://doi.org/10.4334/JKCI.2015.27.3.215.
21 Li, V.C. (2002), "Large volume high performance applications of fibers in civil engineering", J. Appl. Polym. Sci., 83(3), 660-686. https://doi.org/10.1002/app.2263.   DOI
22 Mehta, P.K., Monteiro, P.J.M. (2006), Concrete: Microstructure, Properties, and Materials, 3rd edition, The McGraw-Hill Companies, Inc., New York, U.S.A.
23 Saleem, M. (2017), "Study to detect bond degradation in reinforced concrete beams using ultrasonic pulse velocity test method", Struct. Eng. Mech., 64(4), 427-436. https://doi.org/10.12989/sem.2017.64.4.427.   DOI
24 Mo, K.H., Alengaram, U.J., Visintin, P., Goh, S.H., Jumaat, M.Z. (2015), "Influence of lightweight aggregate on the bond properties of concrete with various strength grades", Construct. Build Mater., 84, 377-386. https://doi.org/10.1016/j.conbuildmat.2015.03.040.   DOI
25 Newman, J. and Choo, B.S. (2003), Advanced Concrete Technology 2: Concrete Properties, 1st edition., Butterworth-Heinemann, United Kingdom.
26 Nematzadeh, M., Poorhosein, R. (2017), "Estimating properties of reactive powder concrete containing hybrid fibers using UPV", Comput. Concrete, 20(4), 4915-502. https://doi.org/10.12989/cac.2017.20.4.491.
27 Ozawa, M., Morimoto, M. (2014), "Effects of various fibres on high-temperature spalling in high-performance concrete", Construct. Build Mater., 71, 83-92. https://doi.org/10.1016/j.conbuildmat.2014.07.068.   DOI
28 Poon, C.S., Shui, Z.H., Lam, L. (2004), "Compressive behavior of fiber reinforced high-performance concrete subjected to elevated temperatures", Cement Concrete Res., 34, 2215-2222. https://doi.org/10.1016/j.cemconres.2004.02.011.   DOI
29 Siddique, R. and Kaur, D. (2012), "Properties of concrete containing ground granulated blast furnace slag (GGBFS) at elevated temperatures", J. Adv. Res., 3, 45-51. https://doi.org/10.1016/j.jare.2011.03.004.   DOI
30 Somayaji, S. (2001), Civil Engineering Materials, 3rd edition, Prentice Hall, New Jersey, U.S.A.
31 Soroushian, P., Mirza, F., Alhozaimy, A. (1994), "Bonding of confined steel fiber reinforced concrete to deformed bars", ACI Mater. J., 91(2), 144-149.
32 Yan, Z., Shen, Y., Zhu, H., Li, X., Lu, Y. (2015), "Experimental investigation of reinforced concrete and hybrid fibre reinforced concrete shield tunnel segments subjected to elevated temperature", Fire Safety J., 71, 86-99. https://doi.org/10.1016/j.firesaf.2014.11.009.   DOI
33 Tang, C.W. (2015), "Local bond stress-slip behavior of reinforcing bars embedded in lightweight aggregate concrete", Comput. Concrete, 16(3), 449-466. http://dx.doi.org/10.12989/cac.2015.16.3.449.   DOI
34 Tang, C.W. (2017), "Uniaxial bond stress-slip behavior of reinforcing bars embedded in lightweight aggregate concrete", Struct. Eng. Mech., 62(5), 651-661. https://doi.org/10.12989/sem.2017.62.5.651.   DOI
35 Tang, C.W. (2018), "Local bond-slip behavior of medium and high strength fiber reinforced concrete after exposure to high temperatures", Struct. Eng. Mech., 66(4), 477-485. https://doi.org/10.12989/sem.2018.66.4.477.   DOI
36 Xiong, M.X., Richard Liew, J.Y. (2015), "Spalling behavior and residual resistance of fibre reinforced Ultra-High performance concrete after exposure to high temperatures", Materiales de Construccion, 65, 320. https://doi.org/10.3989/mc.2015.00715.
37 Xu, M., Hallinan, B., Wille, K. (2016), "Effect of loading rates on pullout behavior of high strength steel fibers embedded in ultra-high performance concrete", Cement Concrete Compos., 70, 98-109. https://doi.org/10.1016/j.cemconcomp.2016.03.014.   DOI
38 Zhang, H., Yu, R.C. (2016), "Inclined Fiber Pullout from a Cementitious Matrix: A Numerical Study", Materials, 9(10), 800. https://doi.org/10.3390/ma9100800.   DOI
39 ACI Committee 408 (2003), Bond and Development of Straight Reinforcing Bars in Tension (ACI 408R-03), American Concrete Institute, Farmington Hills, Mich., U.S.A.
40 ACI Committee 544 (1982), "State of the art report of fiber reinforced concrete", Concr. Int.: Des. Construct., 4(5), 9-30.
41 ACI-318 (2014), Building Code Requirements for Reinforced Concrete and Commentary, American Concrete Institute, Farmington Hills, Mich., U.S.A.
42 Ahmad, S., Pilakoutas, K., Rafi, M.M., Zaman, Q.U. (2018), "Bond strength prediction of steel bars in low strength concrete by using ANN", Comput. Concrete, 22(2), 249-259. https://doi.org/10.12989/cac.2018.22.2.249.   DOI
43 Alexandre Bogas J., Gomes, M.G., Real, S. (2014), "Bonding of steel reinforcement in structural expanded clay lightweight aggregate concrete: The influence of failure mechanism and concrete composition", Construct. Build Mater., 65, 350-359. https://doi.org/10.1016/j.conbuildmat.2014.04.122.   DOI
44 Al-Shannag, M.J. and Charif, A. (2017), "Bond behavior of steel bars embedded in concretes made with natural lightweight aggregates", J. King Saud U. Eng. Sci., 29, 365-372. https://doi.org/10.1016/j.jksues.2017.05.002.