• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.49 no.3
• /
• pp.19-25
• /
• 2012

Underwater sensor networks (UWSNs) employ acoustic channels for communications. One of the main characteristics of the underwater acoustic channel is long propagation delay. Previously proposed MAC (medium access control) protocols for wireless sensor networks cannot be directly used in UWSNs due to the long propagation delay. The long propagation delay and uneven nodes deployments cause spatial fairness in UWSNs. Therefore, a new MAC protocol for UWSNs needs to be developed to provide efficient communications. In this paper, we propose an efficient MAC protocol in order to alleviate the fairness problem. In the proposed scheme, when a node receives a RTS packet, it does not immediately send back but delays a CTS packet. The node collects several RTS packets from source nodes during the delay time. It chooses one of the RTS packets based on the queue status information. And then, it sends a CTS packet to the source node which sent the chosen RTS packet. The performance of the proposed scheme is investigated via simulation. Simulation results show that our scheme is effective and alleviates the fairness problem.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.3
• /
• pp.91-99
• /
• 2009

Development of high-speed Internet services and the increased supply of mobile devices have become the key factor for the acceleration of ubiquitous technology. WiBro system, formed with lP backbone network, is a MBWA technology which provides high-speed multimedia service in a possibly broader coverage than Wireless LAN can offer. Wireless telecommunication environment needs not only mobility support in Layer 2 but also mobility management protocol in Layer 3 and has to minimize handover latency to provide seamless mobile services. In this paper, we propose a fast cross-layer handover scheme based on signal strength prediction in WiBro environment. The signal strength is measured at regular intervals and future value of the strength is predicted by Exponential Smoothing Method. With the help of the prediction, layer-3 handover activities are able to occur prior to layer-2 handover, and therefore, total handover latency is reduced. Simulation results demonstrate that the proposed scheme predicts that future signal level accurately and reduces the total handover latency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.4B
• /
• pp.360-367
• /
• 2009

In this paper, we propose a design methodology of IEEE 802.11n MAC which aims to achieve the higher throughput of more than 100Mbps in downlink as measured at the MAC-SAP and present the implementation results of MAC using the proposed design methodology. With our proposed methodology, different from the conventional design flow which has the separate codes for the protocol validation, for the network simulation, and for the system implementation, the unified code can be used for the network simulation and the implementation of software and hardware. Our MAC architecture is partitioned into two parts, Upper-layer MAC and Lower-layer MAC, in order to achieve the high efficiency for the new features of IEEE 802.11n standard. They are implemented in software and hardware respectively. The implemented MAC is tested on ARM based FPGA board.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.5
• /
• pp.3-9
• /
• 2015

The wireless communication system adopts an appropriate retransmission scheme on each system protocol layer to improve reliability of data transmission. In each system protocol layer, the retransmission scheme operates in independently other layers and operates based on the parameters without reference to end-to-end performance of wireless communication system. For this reason, it is difficult to design the optimal system parameters that satisfy the QoS requirements for each service class. Thus, the performance analysis of wireless communication system is needed to design the optimal system parameters according to the end-to-end QoS requirements for each service class. In this paper, we derive the mathematical model to formulate the end-to-end performance of wireless communication system. We also evaluate the performance at the MAC and transport layers in terms of average spectral efficiency and average transmission delay. Based on the results of performance evaluations, we design the optimal system parameters according to the QoS requirements of service classes. From the results, the HARQ combined with AMC is appropriate for the delay-sensitive service and the ARQ combined with AMC is appropriate for a service that is insensitive to transmission delay. Also, the TCP can be applied for the delay-insensitive service only.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.8A
• /
• pp.618-624
• /
• 2009

In the evolution from wireless sensor networks(WSNs) to ubiquitous sensor networks(USNs), technologies that can support intensive data-traffic loads, large number of users, improved interoperability, and extreme longevity are required. Therefore, efficient communication time coordination control and low power consumption becomes one of the most important design goals for USN MAC protocols. So far several time division multiplexed (TDM) MAC protocols have been proposed. However, since the pros and cons of existing protocols are not easy to analyze, it becomes a challenging task to design improved TOM MAC protocols. Based on this objective, this paper provides a novel protocol analysis along with a message complexity derivation and comparison of the existing TDM MAC protocols.

• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.515-527
• /
• 2009

IEEE 802.11n is an ongoing next-generation WLAN(Wireless Local Area Network) standard that supports a very high-speed connection with more than 100Mb/s data throughput measured at the MAC(Medium Access Control) layer. Study trends of IEEE 802.11n show two aspects, enhanced data throughput using aggregation among packets in MAC layer, and better data rates adapting MIMO(Multiple-Input Multiple-Output) in PHY(Physical) layer. But, the former doesn't consider wireless channel and the latter doesn't consider aggregation among packets for reality. Therefore, this paper analyzes data throughput for IEEE 802.11n considering MAC and PHY connection. A-MPDU(Aggregation-MAC Protocol Data Unit) and A-MSDU(Aggregation-MAC Service Unit) is adapted considering multi-service in MAC layer, WLAN MIMO TGn channel using SVD(Singular Value Decomposition) is adapted considering MIMO and wireless channel in PHY layer. Consequently, Simulation results shows throughput between A-MPDU and A-MSDU. Also, We use Ns-2(Network simulator-2) for reality.

• Journal of KIISE:Information Networking
• /
• v.34 no.1
• /
• pp.48-61
• /
• 2007

WiBro (Wireless Broadband) service, developed in Korea, can provide the host mobility while its users hang around within the subnet. Next-generation Internet protocols, IPv6 and Mobile IPv6 (MIPv6), provide a plenty of addresses to the nodes and enable the handover between different subnets. However, MIPv6 is not enough to support a real time service such as VoIP (Voice over IP) due to the long latency, and it is necessary to develop an enhanced handover mechanism which is optimized to the WiBro networks. In this paper, we suggest an improved fast handover mechanism while the mobile node moves around WiBro networks. The proposal is based on Fast Mobile IPv6 (FMIPv6) which is the representative protocol for fast handover, and reduces the handover latency by the close interaction between the link layer (WiBro MAC) and IP layer (FMIPv6). Finally, we analyze the performance of proposed mechanism through the mathematical analysis.

• The Journal of the Korea Contents Association
• /
• v.9 no.7
• /
• pp.67-75
• /
• 2009

IEEE 802.11 WLAN(Wireless Local Area Network) standard is currently developing with increased wireless internet demand. Study trends of IEEE 802.11n for high throughput show two aspects, enhanced system throughput using aggregation among packets in MAC(Medium Access Control) layer, and better data rates adapting MIMO(Multiple-Input Multiple-Output) in PRY(Physical) layer. But, no one demonstrates IEEE 802.11n system performance results considering MAC and PRY connection. This paper adapts A-MPDU(Aggregation-MAC Protocol Data Unit) method in MAC layer and MIMO in PRY layer for IEEE 802.11n system. Consequently, Simulation results show enhanced throughput and data rates compared to existing system. Also, We use NS-2(Network Simulator-2) considering MAC and PRY connection for reality.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.12B
• /
• pp.1058-1067
• /
• 2006

In this paper, we propose a inband/outband broadcast method for hidden incumbent system detection of medium access control layer for wireless regional area network systems using cognitive radio technology. Through some extra channels that are not currently used, a short message is broadcasted. The message allows CPE detecting an appearance of incumbent system to send sensing report to CR BS. For the hidden incumbent system report message, the BS needs a process or method for allocation of upstream resource to CPEs. And transmitting multiple out-band signals has a possibility to collide with out-band signals of other co-located WRAN BSs. To avoid out-band signal collision, BSs randomly select it out-band signal broadcasting time within the pre-defined explicit out-band signaling, period. And fractional Bandwidth Usage allows WRAN BSs to efficiently use bandwidth.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.3
• /
• pp.943-961
• /
• 2020

With the advent of IoT technology and Big Data computing, the importance of WSNs (Wireless Sensor Networks) has been on the rise. For energy-efficient and collection-efficient delivery of any sensed data, lots of novel wireless medium access control (MAC) protocols have been proposed and these MAC schemes are the basis of many IoT systems that leads the upcoming fourth industrial revolution. WSNs play a very important role in collecting Big Data from various IoT sensors. Also, due to the limited amount of battery driving the sensors, energy-saving MAC technologies have been recently studied. In addition, as new IoT technologies for Big Data computing emerge to meet different needs, both sensors and sinks need to be mobile. To guarantee stability of WSNs with dynamic topologies as well as frequent physical changes, the existing MAC schemes must be tuned for better adapting to the new WSN environment which includes energy-efficiency and collection-efficiency of sensors, coverage of WSNs and data collecting methods of sinks. To address these issues, in this paper, a self-organization scheme for mobile sensor networks with mobile multiple sinks has been proposed and verified to adapt both mobile sensors and multiple sinks to 3-dimensional group management MAC protocol. Performance evaluations show that the proposed scheme outperforms the previous schemes in terms of the various usage cases. Therefore, the proposed self-organization scheme might be adaptable for various computing and networking environments with big data.