• Journal of information and communication convergence engineering
• /
• 제4권3호
• /
• pp.97-100
• /
• 2006

In this paper, the transmission service for medical image is proposed via IEEE 802.15.4a on WPAN environment. Also, transmission and receiving performance of medical image using TH UWB-IR system is evaluated on indoor multi-path fading environment. On the results, the proposed scheme can solve the problem of interference from the medical equipment in same frequency band, and minimize the loss due to the indoor multi-path fading environment. Therefore, the transmission with low power usage is possible.

• 인터넷정보학회논문지
• /
• 제25권5호
• /
• pp.53-65
• /
• 2024

Currently, artificial intelligence (AI) is being applied in the medical field to collect and analyze data such as personal genetic information, medical information, and lifestyle information. In particular, in the medical imaging field, AI is being applied to the medical imaging field to analyze patients' medical image data and diagnose diseases. Deep learning (DL) of deep neural networks such as CNN and GAN have been introduced to medical image analysis and medical data augmentation to facilitate lesion detection, quantification, and classification. In this paper, we examine AI used in the medical imaging field and review related medical image data acquisition devices, medical information systems for transmitting medical image data, problems with medical image data, and the current status of explainable artificial intelligence (XAI) that has been actively applied recently. In the future, the continuous development of AI and information and communication technology (ICT) is expected to make it easier to analyze medical image data in the medical field, enabling disease diagnosis, prognosis prediction, and improvement of patients' quality of life. In the future, AI medicine is expected to evolve from the existing treatment-centered medical system to personalized healthcare through preemptive diagnosis and prevention.

• 대한디지털의료영상학회논문지
• /
• 제14권1호
• /
• pp.21-29
• /
• 2012

The purpose of this study is to evaluate the mutual relations by measuring SNR from T2 weighted image and ADC values on the basis of the stiffness values from liver tissues. This study was conducted that total 37 people(23 of males and 11 of females) were taken the liver MRI examination and average age was $54.5{\pm}12.7$ years old. The equipment was MAGNETOM Skyra 3.0T (SIEMENS, Erlangen, Germany) and 32 channel body-array coil. The examination were conducted with HASTE T2 weighted image by axial plane, Spin-echo EPI (echo planner image) DWI (b-value = 800) and Magnetic resonance elastography. The ROIs (region of interest: 200-300 $mm^2$) were established on the basis of the first axial stiffness image corresponded 95% confidence interval from axial stiffness image and then were measured values. After drawing the grid lines, signals were measured SNR from T2 weighted image and ADC values on the same locations that were analysed other 3 planes respectively. The results were showed correlation (0.057) that were increased to SNR from T2 weighted image by increasing stiffness value that no significant difference statistically p = 0.003. Other results were showed correlations (-0.301) that were decreased to ADC values by increasing stiffness values that no significant difference statistically p = 0.088. In the 3.0T equipment, the results may be error in much the same fashion as the 1.5T from ADC values by evaluation of fibrosis stage. However, Magnetic resonance elastography would be useful method that is used to diagnose exactly liver fibrosis stages in the 3.0T.

• 대한방사선협회지
• /
• 제27권2호
• /
• pp.66-85
• /
• 2001

In medical equipments as complex as a computed tomographic equipment, routine quality control procedures are essential to the detection of small pathologic change in soft tissue as well as and the maintenance of optimal image quality. This study was condu

• 핵의학기술
• /
• 제26권2호
• /
• pp.37-42
• /
• 2022

Purpose Since 1985, the Korean society of nuclear medicine technology (KSNMT) has been engaged in academic activities related to nuclear medicine imaging. From 2017 to 2021, the papers published in the journal were classified by the specific fields to examine the trends in the research and the direction of nuclear medicine in comparison with the papers submitted to the Korean Society of Nuclear Medicine (KSNM) during the same period. Materials and Methods From 2017 to 2021, papers submitted to KSNMT and KSNM were classified and databaseization using the Excel program by submission type, examination equipment, and examination field. Through this data, the number of papers published in journals by year, the number of papers submitted by detailed fields, and key words by era were analyzed and compared. Results The papers included by journal was 57 KSNMT and 280 KSNM. The major large classification of equipment, PET, Planar and SPECT was 26.3%, 21.1%, 19.3% in the KSNMT, KSNM was 49.6%, 6.4%, and 9.3%, with 66.7% and 65.3%, respectively. the major medium classification of equipment, industrial safety, urogenital system, nervous system, and quality control accounted for 54.4% of the total papers of the total ratio in the KSNMT, while the medium classification of oncology, endocrine system, urogenital system, therapy, and nervous system accounted for 61.1% of KSNM. In the major small classification of image acquisition, improvement effect, and exposure management accounted for 70.2% in KSNMT, while the items of image acquisition, report, and improvement effect accounted for 60.7% in KSNM. The major keywords except for equipment-related keywords such as PET/CT, PET/MR, and SPECT were SUV, Planar Image, and Respiration Gating Method in KSNMT and Ga68, Thyroid, and Lymphoma in the KSNM. Conclusion When checking the last 5 years of submissions, we can see that KSNMT is mainly concerned with image acquisition using existing radiotracers, while KSNM has focused on new radiotracers such as ⁶⁸Ga, ¹⁷⁷Lu, etc., and new medical technologies of theranostic. It has been confirmed that more PET-related papers than other examination equipment will account for a greater number of papers, and it is believed that future submissions will also account for a higher proportion of PET-related papers than other equipment.

• 한국방사선학회논문지
• /
• 제14권2호
• /
• pp.111-120
• /
• 2020

병원에서 사용하는 X선 장비는 X선 장비의 능력 연구와 더불어 출력되는 영상의 화질까지도 분석하는 연구가 활발히 진행되어야 한다. 영상의학과 장비의 X-Ray기계나 CT, MRI와 같은 장비의 후향적 이미지 분석은 활발히 진행되었으나 혈관조영실의 혈관조영장비를 이용하여 획득한 영상의 화질 측정은 팬텀을 이용하여 측정하는 방법이 대부분이고 실제 환자에게 촬영된 후의 영상에 관한 화질 측정은 미비한 실정이며 정확한 화질 측정 방법에 관한 연구가 현저히 부족한 상태이다. 따라서 본 연구를 통해 관상동맥 조영술 후 획득된 영상의 화질측정 방법을 고안한 연구를 진행해 시술자에게 질 높은 영상을 제공하고자 연구를 진행하게 되었다. 사용된 장비 및 프로그램은 혈관 조영 검사 장비(Axiom Artis Zee Ceiling)와 Image J프로그램을 사용하였다. 대상으로는 관상동맥 조영술 후 PACS프로그램에 자동 저장된 영상들을 대상으로 하였다. 화질 측정 방법으로는 Image J프로그램을 이용했을 때 관상동맥 조영술 중 좌 관상동맥의 주요 혈관들이 가장 잘 펼쳐져 보이는 각도의 영상인 AP Caudal 30°영상과 우 관상동맥의 혈관이 가장 잘 펼쳐져 보이는 LAO 30° 영상을 선택하여 선택된 영상의 배경영역(Background)과 관심영역(ROI)을 측정하기 위해 혈관과 간, 폐 등의 음영 중복이 가장 최소화 되는 구간을 찾아 측정하는 방법에 관한 기준을 제시하였다. 결론적으로 혈관 조영 영상의 화질측정 분석 방법은 정확히 제시되어 있는 기준이 없기 때문에 시술자에게 질 좋은 영상을 제공하기 위해선 그 장비의 기술자들뿐 아니라 실제로 사용하는 사용자들이 연구자가 되어 다양한 방법으로 화질측정에 관한 연구를 진행해야만 환자에게도 우수한 영상을 제공할 수 있을 것으로 사료된다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제46권1호
• /
• pp.15-21
• /
• 2023

This study was purpose to assessment of the resolution characteristics by using ATS 535H Basic quality assurance (QA) phantom for ultrasound. The ultrasound equipment was used Logiq P6 (Ultrasound, GE Healthcare System, Chicago, IL, USA). And the ultrasound transducer were used Convex 4C (4~5.5 MHz), Linear 11L (10~13 MHz), Sector 3SP (3~5.5 MHz) probe. As for the noise power spectrum (NPS) comparison results by using ATS 535H Basic QA ultrasound phantom and Convex 4C, Linear 11L, Sector 3SP probe. The NPS value of the Convex 4C probe image was 0.0049, Linear 11L probe image was 0.0049, Sector 3SP probe image was 0.1422 when the frequency is 1.0 mm^-1. The modulation transfer function (MTF) comparison results by using ATS 535H Basic QA ultrasound phantom and Linear 11L probe the MTF value of the 3 cm focus image was 0.7511 and 4 cm focus image was 0.9001 when the frequency is 1.0 mm^-1. This study was presented characteristics of spatial resolution a quantitative evaluation methods by using ultrasound medical images for QA of ultrasound medical QA phantom. The quality control (QC) for equipment maintenance can be efficiently used in the clinic due to the quantitative evaluation of the NPS and MTF as the standard methods. It is meaningful in that it is applied mutatis mutandis and presented the results of physical resolution characteristics of the ultrasound medical image.

• 한국방사선학회논문지
• /
• 제14권6호
• /
• pp.819-825
• /
• 2020

전산화단층촬영장비 테이블로 인한 화질 저하의 경감을 위하여 개발한 에어 매트리스(Air mattress)의 유용성을 평가하고자 하였다. 5, 10 cm 두께의 에어 매트리스(Air mattress)를 개발하여 적용 유무와 두께에 따른 AAPM 팬텀을 스캔한 영상을 통하여 화질을 측정하였으며 일원배치 분산분석으로 통계적 유의성을 확인하였다. AAPM 팬텀을 표준 방식으로 스캔한 영상과 비교했을 때 에어 매트리스를 적용한 영상은 차이가 나타나지 않았으나, 에어 매트리스를 적용하지 않았을 때의 영상은 CT Number와 균일도가 낮아지고 노이즈가 높게 나타났으며 공간분해능이 낮아지는 것으로 나타났다. 개발된 에어 매트리스는 진단 영상에 아무런 해가 없을 뿐만 아니라, 화질을 높이는 데에 매우 효과적이며 최신, 고가 장비에 적용되는 기술을 이용하지 않고도 기존의 장비에 단순히 에어 매트리스를 적용함으로써 화질을 증가시킬 수 있다.

• International Journal of Advanced Culture Technology
• /
• 제12권2호
• /
• pp.368-374
• /
• 2024

During an X-ray examination, the beam of radiation is dispersed in many directions. We believe that managing radiation dose is about providing transparency to users and patients in the accurate investigation and analysis of radiation dose. The purpose of measuring the radiation dose as a function of location is to ensure that medical personnel using the equipment or participating in the operating room are minimally harmed by the different radiation doses depending on their location. Four mobile diagnostic X-ray units were used to analyze the radiation dose depending on the spatial location. The image intensifier and the flat panel detector type that receives the image analyzed the dose by angle to measure the distribution of the exposure dose by location. The radiation equipment used was composed of four units, and measuring devices were installed according to the location. The X-ray (C-arm) was measured by varying the position from 0 to 360 degrees, and the highest dose was measured at the center position based on the abdominal position, and the highest dose was measured at the 90° position for the head position when using the image intensifier equipment. The operator or medical staff can see that the radiation dose varies depending on the position of the diagnostic radiation generator. In the image intensifier and flat panel detector type that accepts images, the dose by angle was analyzed for the distribution of exposed dose by position, and the measurement method should be changed according to the provision of dose information that is different from the dose output from the equipment according to the position.

• 대한방사선기술학회지:방사선기술과학
• /
• 제45권2호
• /
• pp.127-134
• /
• 2022

In order to overcome the image quality limitations of the conventional C-arm, a flat panel detector (FPD) is used to enhance spatial resolution, detective quantum efficiency, frame rate, and dynamic range. Three-dimensional (3D) visualized information can be obtained from C-arm computed tomography (CT) equipped with an FPD, which can reduce patient discomfort and provide various medical information to health care providers by conducting procedures in the interventional procedure room without moving the patient to the CT scan room. Unlike a conventional C-arm device, a C-arm CT requires different basic safety and essential performance evaluation criteria; therefore, in this study, basic safety and essential performance evaluation criteria to protect patients, medical staff, and radiologists were derived based on International Electrotechnical Commission (IEC) standards, the Ministry of Food and Drug Safety (MFDS) standards in Korea, and the rules on the installation and operation of special medical equipment in Korea. As a result of the study, six basic safety evaluation criteria related to electrical and mechanical radiation safety (leakage current, collision protection, emergency stopping device, overheating, recovery management, and ingress of water or particulate matter into medical electrical (ME) equipment and ME systems: footswitches) and 14 essential performance evaluation criteria (accuracy of tube voltage, accuracy of tube current, accuracy of loading time, accuracy of current time product, reproducibility of radiation output, linearity and consistency in radiography, half layer value in X-ray equipment, focal size and collimator, relationship between X-ray field and image reception area, consistency of light irradiation versus X-ray irradiation, performance of the mechanical device, focal spot to skin distance accuracy, image quality evaluation, and technical characteristic of cone-beam computed tomography) were selected for a total of 20 criteria.