• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.42 no.6
• /
• pp.67-76
• /
• 2005

This paper proposes a compact-sized surface myoelectric sensor for the myoelectric hand prosthesis. To fit the surface myoelectric sensor in the socket for the myoelectric hand prosthesis, the sensor should be a compact size. The surface myoelectric sensor is. composed of a skin interface and a single processing circuit that are mounted on a single package. The skin interface has one reference and two input electrodes, and the reference electrode is located in the center of two input electrodes. In this paper we propose two types of sensors with the circle- and bar-shaped reference electrode, but all input electrodes are the bar-shaped. The metal material of the electrodes is the stainless steel (SUS440) that endures sweat and wet conditions. Considering the conduction velocity and the median frequency of the myoelectric signal, we select the inter-electrode distance (IED) between two input electrodes as 18mm, 20mm, and 22 mm. The signal processing circuit consists of a differential amplifier with a band pass filter, a band rejection filter for rejecting 60Hz power-line noise, amplifiers, and a mean absolute value circuit. We evaluate the proposed sensor from the output characteristics according to the IED and the shape of the reference electrode. From the experimental results we show the surface myoelectric sensor with the 18mm IED and the bar-shaped reference electrode is suitable for the myoelectric hand prosthesis.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.18 no.3
• /
• pp.255-264
• /
• 1989

The results of toxicity test using mice and rats for ethanol extract of Bracken Fern collected in Kwang Ju area were shown as follows ; Up to the dose of 10g per kg of mice administered intraperitoneally there was no lethal toxicity so that it was impossible to calculate the median lethal dose $(LD_{50})$. For the first 7 days experiment all rats administered frond extract grouping in 40mg, 400mg, and 1200mg per kg of rat as the daily oral doses did not show any characterized sign in the weight gain rate, anatomical findings, and biochemical studies. For 3 weeks following the first week the weight gain rates of all test group were reduced to $4.2{\sim}7%$ below the weight gain rate of control. In this period serum GPT, GOT, and Alkaline phosphatase value were increased significantly indicating the symptoms of Bracken Fern poisonings. The pathological findings of all test groups for 28 days showed acute and chronic intestinal lesion and liver damage with steatosis especially in 1200g/kg rat groups. In this experiment the Bracken poisonings appeared slowly in rats of 400mg/kg and 1200mg/kg for two weeks and in rats of 40mg/kg for 3 weeks, showing the symptoms of lowering of weight gain rate, subacute hepatitis, hepatic steatosis and enteritis in 28 days experiment.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.33-39
• /
• 2020

In this paper, we propose the design technique of the vehicle's load weight measuring system using tire pressure, which is one of the physical elements of tires. The proposed technique consists of four processes: noise correction by load and vibration, gas flow correction, data mixer and weight conversion. Noise correction by load and vibration eliminates noise that increases the tire's internal pressure due to external shocks and vibrations produced by the vehicle while it is in motion. In the gas flow correction process, the noise of the internal pressure of the tire is increased due to the temperature rise of the ground with respect to the data obtained through the noise correction process due to the load and vibration. In the data mixer process, the load and pressure on the tolerances the empty, median and the full load are classified according to the change in pressure of the tire that is delivered perpendicular to the tire in the event of cargo. In the weight conversion process, weight is expressed by weight through weight conversion algorithms using noise correction results by load and vibration and gas flow correction. The weight conversion algorithm calculates the weight conversion factor, which is the slope of the linear function with respect to the load and pressure change, and converts the weight. In order to evaluate the accuracy of the loading weight measurement system of the vehicle using the tire pneumatic system technique proposed in this paper, we propose the design technique of the vehicle's load weight measuring system using tire pressure, which is one of the physical elements of tires.. Noise correction results by load and vibration and gas flow data correction results showed reliable results. In addition, repeated weight precision test showed better weight accuracy than the standard value of 90% of domestic companies.

• Journal of Convergence for Information Technology
• /
• v.7 no.4
• /
• pp.97-103
• /
• 2017

The purpose of this study was to investigate muscle activity of cervical erector spinae & upper trapezius while using a smartphone according to anterior pelvic tilt & posterior pelvic tilt in sitting position. & we also want to obtain basic data necessary for development of IoT devices. Fifteen healthy men & women aged 20-30 were enolled, After anterior pelvic tilt & posterior pelvic tilt in sitting position were adjusted, they used a smartphone for 5 minutes & EMG signal was measured simultaneously. We used median 3 minutes of measured EMG signal. The results of this study were as follows: In the sitting position, the use of smartphone in anterior pelvic tilt had significantly lower %RVC values in both cervical erector spinae (p <.001), left upper trapezius (p <.001) & right upper trapezius (p <.002) in comparison with posterior pelvic tilt. This means that anterior pelvic tilt make vertebrae maintain normal curvature & prevent forward head posture occurred while using a smartphone. It reduces loads around neck & shoulders, so that %RVC value is significantly lowered. In the future, new posture corrected IoT devices with an aspect of pelvic tilt should be developed.

• Journal of Pharmaceutical Investigation
• /
• v.37 no.6
• /
• pp.397-402
• /
• 2007

To evaluate the bioequivalence of two venlafaxine formulations, a standard 2-way randomized cross-over study was conducted in twenty-four healthy male Korean volunteers. A single oral dose of 75 mg of test formulation Venfaxine $OR^{(R)}$ (tablet) or reference formulation Efexor $XR^{(R)}$ (capsule) was administered with one-week washout period. Plasma concentrations of venlafaxine were assayed for over a period of 72 hours with a well validated method using liquid chromatography coupled to tandem mass spectrometry (LC-MS-MS). The $mean{\pm}S.D$. of maximum concentration $(C_{max})$ and elimination half-life $(t_{1/2})$ were $64.7{\pm}28.5$ ng/mL, $9.2{\pm}3.0$ h, and $67.2{\pm}30.2$ ng/mL, $9.9{\pm}3.5$ h for test and reference formulations, respectively. Time to reach maximum concentration $(T_{max})$ expressed in median value (range), for the test and the reference, were 10 h (6-14) and 8h (4-12), respectively. Similarly, area under the plasma concentration-time curve, from time zero to last sampling time $(AUC_t)$ and from time zero to time infinity $(AUC_{inf})$, for test and reference formulations were $1185{\pm}755$, $1326{\pm}896$ and $1124{\pm}737$, $1185{\pm}755$ $ng{\cdot}h/mL$, respectively. The parametric 90% confidence intervals on the mean of the differences between the two formulations (test-reference) of the log transformed values of $AUC_t$, and $C_{max}$ were 0.9630 to 1.1383 and 0.8650 to 1.0446, respectively. The overall results indicate that the two formulations are bioequivalent and can be prescribe interchangeably.

• Journal of Chest Surgery
• /
• v.31 no.4
• /
• pp.393-397
• /
• 1998

A 25-year-old man with viral cardiomyopathy and chronic active hepatitis successfully underwent dynamic cardiomyoplasty for the first time in Korea on July 30, 1996. The patient had been intermittently dyspneic for 5 years and was admitted to our center twice because of heart failure. For the past 2 years, he was NYHA functional class III status with a left ventricular ejection fraction(LVEF) of around 30%. The patient was born with scoliosis and showed a short stature. The liver function showed elevated liver enzymes, and hepatitis B antigen was positive. The liver biopsy revealed chronic active hepatitis. The preoperative echocardiogram showed decreased left ventricular function with grade II mitral and grade II tricuspid regurgitation with dilated left and right atrium. Recently his symptoms worsened and we decided to perform a dynamic cardiomyoplasty. The left latissmus dorsi muscle(LDM) was mobilized and tested with lead placement on his right lateral decubitus position. The patient was positioned into supine and, after median sternotomy, the heart was wrapped with the mobilized muscle. The Russian made cardiomyostimulator(EKS-445) and leads (Myocardial PEMB for heart and PEMP-1 for LDM) were used. The total operation time was 8 hours and there were no perioperative episodes. Postoperatively the LDM had been trained for a 10 week period and currently the stimulation ratio is maintained at 1:4. The postoperative LVEF did not increase with the value of 30-35%. However, the patient feels better postoperatively with slightly increased activity.

• Journal of Korean Society of Transportation
• /
• v.33 no.6
• /
• pp.554-563
• /
• 2015

This study dealt with developing an accident model for rural signalized intersections with random parameter negative binomial method. The limitation of previous count models(especially, Poisson/Negative Binomial model) is not to explain the integrated variations in terms of time and the distinctive characters a specific point/segment has. This drawback of the traditional count models results in the underestimation of the standard error(t-value inflation) of the derived coefficient and finally affects the low-reliability of the whole model. To solve this problem, this study improves the limitation of traditional count models by suggesting the use of random parameter which takes account of heterogeneity of each point/segment. Through the analyses, it was found that the increase of traffic flow and pedestrian facilities on minor streets had positive effects on the increase of traffic accidents. Left turning lanes and median on major streets reduced the number of accidents. The analysis results show that the random parameter modeling is an effective method for investigating the influence on traffic accident from road geometries. However, this study could not analyze the effects of sequential changes of driving conditions including geometries and safety facilities.

• Mycobiology
• /
• v.35 no.3
• /
• pp.135-144
• /
• 2007

The removal efficiency of the heavy metals Zn, Pb and Cd by the zoosporic fungal species Saprolegnia delica and the terrestrial fungus Trichoderma viride, isolated from polluted water drainages in the Delta of Nile in Egypt, as affected by various ranges of pH values and different temperature degrees, was extensively investigated. The maximum removal efficiency of S. delica for Zn(II) and Cd(II) was obtained at pH 8 and for Pb(II) was at pH 6 whilst the removal efficiency of T. viride was found to be optimum at pH 6 for the three applied heavy metals. Regardless the median lethal doses of the three heavy metals, Zn recorded the highest bioaccumulation potency by S. delica at all pH values except at pH 4, followed by Pb whereas Cd showed the lowest removal potency by the fungal species and vice versa in case of T. viride. The optimum bio-mass dry weight production by S. delica was found when the fungus was grown in the medium treated with the heavy metal Pb at pH 6, followed by Zn at pH 8 and Cd at pH 8. The optimum biomass dry weight yield by T. viride amended with Zn, Pb and Cd was obtained at pH 6 for the three heavy metals with the maximum value at Zn. The highest yield of biomass dry weight was found when T. viride treated with Cd at all different pH values followed by Pb whilst Zn output was the lowest and this result was reversed in case of S. delica. The maximum removal efficiency and the biomass dry weight production for the three tested heavy metals was obtained at the incubation temperature $20^{\circ}C$ in case of S. delica while it was $25^{\circ}C$ for T. viride. Incubation of T. viride at higher temperatures ($30^{\circ}C\;and\;35^{\circ}C$) enhanced the removal efficiency of Pb and Cd than low temperatures ($15^{\circ}C\;and\;20^{\circ}C$) and vice versa in case of Zn removal. At all tested incubation temperatures, the maximum yield of biomass dry weight was attained at Zn treatment by the two tested fungal species. The bioaccumulation potency of S. delica for Zn was higher than that for Pb at all temperature degrees of incubation and Cd bioaccumulation was the lowest whereas T. viride showed the highest removal efficiency for Pb followed by Cd and Zn was the minor of the heavy metals.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.22 no.2
• /
• pp.100-106
• /
• 2012

Objectives: Diazinon is an insecticide which acts as a contact stomach and respiratory poison, and used throughout the world to control a wide range of sucking and chewing insects and mites on a range of crops. In this study, the airborne diazinon levels were measured for farmers, pest control operaters, landscapers, and agricultural chemicals sellers, and an assessment of the health risk to the workers was presented. The exposure scenario was based on the route of inhalation and skin absorption. The "OSHA Method No. 62" was used to sample and measure the airborne diazinon levels. The skin wipe method was applied to measure the level of the diazinone exposure through the skin. For the determination of exposure scenario, the exposure factors were surveyed for the daily average inhalation rate and the exposure period and frequency and time of diazinone as well as the body weight and lifetime of the workers. The median values of exposure frequency and exposure time were selected after evaluating the validity of those. Methods: The highest level of the diazinon exposure in the air was $107.21ug/m^3$ in farmers, followed by $93.53ug/m^3$ in landscapers, at $31.40ug/m^3$ in pest control operators, and $1.04ug/m^3$ in agricultural chemical seller. The amount of skin absorption was the highest in farmers at 63.39 ug/day, followed by landscapers at 10.47 ng/day, pest control operaters at 4.26 ng/day, and agricultural chemicals sellers at 0.34 ng/day. The hazardous indices calculated using toxicological reference value were 2.79 for pest control operaters, 0.41 for landscapers, 0.07 for agricultural chemicals sellers, and 0.06 for farmers. Conclusions: While the farmers were exposed to the high levels of diazinon through the air and skin, the pest control operaters, landscapers and agricultural chemicals sellers have more the diazinon hazards than the farmer based on the risk assessment in this study.

• Radiation Oncology Journal
• /
• v.13 no.3
• /
• pp.253-258
• /
• 1995

Purpose : To evaluate the effects of postoperative radiotherapy and chemotherapy on the pattern of failure and survival for locally advanced rectal carcinoma, we analyzed the two groups of patients who received curative resection only and who received postoperative radiochemotherapy retro-spectively. Materials and Methods : From June 1989 to December 1992, ninety nine patients with rectal cancer were treated by curative resection and staged as B2-3 or C. Group I(25) patients received curative resection only and group II(74) patients postoperative adjuvant therapy. Postoperative adiuvant group received radiation therapy (4500cGy/25fx to whole pelvis) with 5-FU (500mg/$m^2$, day 1-3 IV infusion) as radiosensitizer and maintenance chemotherapy with 5-FU(400mg/$m^2$ for 5 days) and leucovorin (20mg/m^2$ for 5 days) for 6 cycles. Results : The patients in group I and group II were comparable in terms of age sex, performance status, but in group II $74{\%}$ of patients showed stage C compared with $56{\%}$ of group I. All patients were followed from 6 to 60 months with a median follow up of 29 months. Three year overall survival rates and disease free survival rates were $68\%,\;64\%$ respectively in group I and $64\%,\;61\%$, respectively in group II. There was no statistical difference between the two treatment groups in overall survival rate and disease free survival rate. Local recurrences occurred in $28{\%}$ of group I, $21{\%}$ of group II (p>.05) and distant metastases occurred in $20{\%}$ of group I, $27{\%}$ of group II(p>.05). The prognostic value of several variables other than treatment modality was assessed. In multivariate analysis for prognostic factors stage and histologic grade showed statistically significant effect on local recurrences and lymphatic or vessel invasion on distant metastasis. Conclusion : This retrospective study showed no statistical difference between two groups on the pattern of failure and survival. But considering that group II had more advanced stage and poor prognostic factors than group I, postoperative adjuvant radiochemotherapy improves the results for locally advanced rectal carcinoma as compared with curative surgery alone.