• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.564-568
• /
• 2005

As functional requirements of automatic office machines like printers, ATMs, copying machines are on a trend for the higher speed and precision, extensive technical advances are being developed and implemented in the industry. Media transport system is a device to convey a sheet of paper in ATMs and printers. The stability of media transport system is a matter of concern as their operating throughput rapidly increases. And defects of belts or rollers in a transport system directly affect the level of stability of the system. Therefore an automatic diagnostic system for predicting various defects is necessary for the stable operation of the media transport system. A simulation based on multi-body dynamics has been done for a feasibility study of a system design for the defect anticipation.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2002년도 총회 및 춘계학술발표회
• /
• pp.319-322
• /
• 2002

The bacterial transport in soil media was studied. Nonionic surfactants, enhanced the bacterial transports in soil media. The transport rate in soil column was increased by increasing the number of ethylene oxide in polyoxyethylene oxide surfactants. Ionic strength of solution affected the microbial transport characteristics in soil. The hydrophobicity of cell surface was proved that one of important characteristics on the bacterial transport in soil media.

• ETRI Journal
• /
• 제30권3호
• /
• pp.441-450
• /
• 2008

The scalable extension of H.264, known as scalable video coding (SVC) has been the main focus of the Joint Video Team's work and was finalized at the end of 2007. Synchronization between media is an important aspect in the design of a scalable video streaming system. This paper proposes an efficient media synchronization mechanism for SVC video transport over IP networks. To support synchronization between video and audio bitstreams transported over IP networks, a real-time transport protocol/RTP control protocol (RTP/RTCP) suite is usually employed. To provide an efficient mechanism for media synchronization between SVC video and audio, we suggest an efficient RTP packetization mode for inter-layer synchronization within SVC video and propose a computationally efficient RTCP packet processing method for inter-media synchronization. By adopting the computationally simple RTCP packet processing, we do not need to process every RTCP sender report packet for inter-media synchronization. We demonstrate the effectiveness of the proposed mechanism by comparing its performance with that of the conventional method.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.681-685
• /
• 2004

A media-feeding (or media-transport) system is a key component in daily consumer systems such as printers, copiers and ATM's. The role of the media-transport system is to feed a medium, which is usually in the form of a thin film, to the main process in a uniform and repeatable manner. Even small slippage between the media and the feeding rollers could significantly degrade the performance of the entire system. The slippage between the medium and the feeding rollers is determined by many parameters which include the friction coefficient between the feeding rollers and the medium material, the angular velocity of the feeding rollers, and the normal force applied by feeding rollers on the medium. This paper investigates the effect of the normal force and the angular velocity of feeding rollers on the slippage of the medium. Authors have constructed a test bed for experiments, which consists of a feeding module and various measuring devices. Using regular paper as media being fed, the authors experimentally measured the slippage of the medium under various normal forces and angular velocities of driving feeding roller. Also the authors developed a novel two-dimensional simulation model for the media-transport system. The paper medium is modeled as a set of multiple rigid bodies interconnected by revolute joints and rotational springs and dampers. Simulations were executed using a multi-body dynamic analysis tool called RecurDy $n^{ⓡ}$. The slippage obtained by the simulation is compared to experimental results.ults.

• 한국소음진동공학회논문집
• /
• 제16권4호
• /
• pp.366-371
• /
• 2006

As functional requirements of automatic office machines like printers, Automatic Tellex Machines(ATMs), copying machines are on a trend for the higher speed and precision, extensive technical advances are being developed and implemented in the industry. Media transport system is a device to convey a sheet of paper in ATMs and printers. The stability of media transport system is a matter of concern as their operating throughput rapidly increases. And defects of belts or rollers in a transport system directly affect the level of stability of the system. Therefore an automatic diagnostic system for predicting various defects is necessary for the stable operation of the media transport system. A simulation based on multi-body dynamics has been done for a feasibility study of a system design for the defect anticipation.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.184-188
• /
• 2009

To interactively share High Definition (HD)-quality visualization over emerging ultra-high-speed network infrastructure, several lossless and low-delay real-time media (i.e., uncompressed HD video and audio) transport systems are being designed and prototyped. However, most of them still rely on expensive hardware components. As an effort to reduce the building cost of system, in this paper, we propose the integration of both transmitter and receiver machines into a single bi-directional transport system. After detailed bottleneck analysis and subsequent refinements of embedded software components, the proposed integration can provide Real-time Transport Protocol (RTP)-based bi-directional transport of uncompressed HD video and audio from a single machine. We also explain how to interface the Gbps-bandwidth display output of uncompressed HD media system to the networked tiled display of 10240 $\times$ 3200 super-high-resolution. Finally, to verify the feasibility of proposed integration, several prototype systems are built and evaluated by operating them in several different experiment scenarios.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.676-679
• /
• 2006

The media transport in automatic office machines such as printers, ATMs, copying machines is achieved by a complicated belt system. The system generally uses a crowning roller and belt which has been well-known for its intrinsic belt centering advantage during its operation. Since the modern office machines require precise high operating speed, stabilization of media transporting system has been one of the important issues of the machine design. Even a minor defect of the belt or the roller in the transport system directly affects its operating stability. This paper delivers a simulation technique that combines a multi-body dynamics analysis routine and a FEM based flexible continuum modeling for the efficient simulation of the flexible media transport problems.

• 방송공학회논문지
• /
• 제10권4호통권29호
• /
• pp.548-556
• /
• 2005

무선 네트워크 환경은 채널의 페이딩 현상 및 채널 잡음으로 인해 다량의 패킷 손실 및 전송 지연의 변동이 유발되며 이는 스트리밍 미디어의 급격한 화질 열화를 발생시킨다. 이러한 채널 변동이 심한 무선 네트워크 환경에서 성공적으로 미디어를 전송하기 위해서는 유동적이고 네트워크에 적응적인 전송 기법이 필요하다. 따라서 본 논문에서는 무선 채널의 변동에 적응적이고 패킷 손실을 최소화하는 패킷 단위 interleaved FEC와 delay-constrained ARQ로 이루어진 응용계층 레벨에서의 네트워크적응형 전송오류 제어 기법을 제안한다. 또한 제안 기법을 포함한 각종 전송오류 제어 (혼합) 기법들을 검증하기 위해 시뮬레이션 툴을 개발하였다. 이를 통해 전송 계층에서의 전송오류 제어 성능을 확인하고, 전송되는 영상에 대한 객관적인 품질 평가를 진행한다. 진행된 시뮬레이션 결과를 통해 제안된 전송오류 제어 기법이 전송 계층에서의 전송오류 제어 성능을 향상시키며, 나아가서 전송되는 영상의 품질을 개선함을 확인한다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2001년도 총회 및 춘계학술발표회
• /
• pp.132-135
• /
• 2001

To understand and compare tracer transport in fractured and porous media. multiple tracer tests were conducted in Wonju and Uiwang sites. The target media were fractured in Wonju site and porous in Uiwang site. It was known that groundwater flow for the two hydrogeologic systems could be represented using a EPM approach. However, the tracer transport in the two aquifer systems was greatly different. In this study, we analyzed the different tracer transport behavior in the two systems, from which our understanding of the tracer dispersion was greatly enhanced. we used bromide and chloride as tracers.

• 산업공학
• /
• 제11권1호
• /
• pp.33-40
• /
• 1998

The objective of this paper is to help organizations select a suitable telecommunications media and dynamic route guidance system (DRGS) for an intelligent transport system (ITS) taking into account both cost and functionality. The media selection criteria and wireless communications for an ITS are discussed along with various DRGS. We describe which kind of telecommunication media and DRGS are suitable. The strategy of an ITS in Korea is described in regards to telecommunication media and DRGS.