• 한국환경과학회지
• /
• 제12권7호
• /
• pp.791-799
• /
• 2003

This study was carried out to get more operational characteristics of the sequencing batch biofilm reactors with media volume/reactor volume ratio of 15 %, 25 % and 35 %. Experiments were conducted to find the effects of the media packing ratio on organic matters and nutrients removal. Three laboratory scale reactors were fed with synthetic wastewater. During studies, the operation mode was fixed. The organic removal efficiency didn't show large difference among three reactor of different packing media ratios. However, from the study results, the optimum packing media ratios for biological nutrient removal was shown as 25%. The denitrifying PAOs could take up and store phosphate using nitrate as electron acceptor.

• 환경위생공학
• /
• 제18권1호
• /
• pp.15-22
• /
• 2003

Treatability tests were conducted using EMC process to study the feasibility of applying this process as recycling-water treatment system in high density seawater aquaculture farm. To study the effect of organic and ammonia nitrogen loading on system performance, hydraulic retention time of reactor was reduced gradually from 12hr to 10min. The conclusions are can be summarized as follows. When the system HRT was reduced from 12hr to 10 min gradually, there was little noticeable change(reduction) in ammonia nitrogen removal efficiencies until 2hr of HRT, however, removal efficiencies were decreased dramatically when the system was operated under the HRT of less than 2hr. In case of organics(COD), there was no dramatic deterioration in removal efficiencies depending on HRT reduction. More than 90% of removal efficiencies were maintained successfully when the system was operated at the HRT of 10 min. In case of system performance depending on media packing ratio in reactor, there was little difference in each reactor performance depending on media packing ratio in reactor when the reactors were operated under the HRT of longer than 1hr, however, differences in reactor performances were considerably evident when the reactors were operated under the HRT of shorter than 1hr. That is, the more reactor was packed, the better reactor performed. When comparing reactor performance among 25%, 50%, 75% packed reactor, it can be judged that media packing ratio more than 50% plays no significant role in increasing reactor performance. For this reason, packing the media less than 50% is more reasonable way in view of economic. Such a tendency well agreed with the variation of ammonia-nitrogen removal efficiencies according to the media packing ratio in reactors at each HRT. Difference in effluent ammonia-nitrogen concentration between 50% media packing reactor and 75% media packing reactor was negligible. When comparing with the results of 25% packing reactor, difference was not so great.

• 한국해양환경ㆍ에너지학회지
• /
• 제7권3호
• /
• pp.116-121
• /
• 2004

고밀도 순환여과식 해산어 양식장의 순환수 처리에 EMMC공정의 적용 가능성을 평가하기 위한 실험을 실시하였다. 처리공정의 운전효율에 유기물 및 암모니아성 질소 부하가 미치는 영향을 평가하기 위하여 수리학적 체류기간을 12시간에서 10분까지 점차적으로 줄여가며 실험을 실시하였다. HRT 2시간까지는 수리학적 체류시간 변화에 따른 제거효율 변화가 거의 없었으나 그 이하의 체류시간에서는 체류시간 단축에 따른 제거효율의 감소가 비교적 크게 나타났다. COD의 경우에는 체류시간 단축에 따른 급격한 제거효율의 변화가 관측되지 않았으며 10분 정도의 체류시간에서도 90％이상의 제거효율을 나타내었다. 메디아 충진율에 따른 반응조 운전효율변화를 보면 HRT가 1시간보다 긴 경우에는 메디아 충진율에 따른 제거효율 변화가 극히 미미하였다. 그러나 1시간 이하의 체류시간에서는 그 차가 상당히 크게 나타나 충진량이 많을수록 제거효율이 높게 나타났으나 50％이상의 메디아 충진이 반응조 운전효율 측면에서는 큰 역할을 하지 못함을 나타내어 경제성 등을 고려할 경우 25％정도만을 충진 시키는 것이 오히려 합리적이라 판단되었다. 이와 같은 경향은 암모니아성 질소 제거의 경우에도 유사한 양상을 나타내었다. 메디아 충진율 50％와 75％사이에는 처리효율의 차이가 거의 없었고 25％충진 반응조와의 차이도 그리 크지 않은 것으로 나타났다.

• 한국물환경학회지
• /
• 제24권6호
• /
• pp.659-669
• /
• 2008

Two sets of four parallel activated sludge reactors (ASRs) maintaining an MLSS of 3000 mg/L were operated to investigate the effect of DO, HRTs and bio-contact media (BCM) packing ratios on the removal efficiency of organic matters and nitrogen. Packing ratios of BCM to BCM-ASR systems 1, 2, 3, and 4 were 0% (suspended growth only), 10%, 15% and 20%, respectively. All systems were operated at an HRT of 4 hr, 6 hr, and 8 hr, respectively; DO concentration was maintained 0.5~1.0 mg/L and 1.5~2.0 mg/L for each HRT condition. In terms of TSS, TCODcr and SCODcr removal efficiency, all systems had a similar level of the removal efficiency under varied HRTs, and DO. But organic removal efficiency of systems with BCM was approximately 3~5% higher than systems without BCM at the same HRT and the DO. About the nitrification efficiency, with high DO (1.5~2.0 mg/L), as HRT (4 hr, 6 hr, 8 hr) or BCM packing ratio increased, the slight increment of nitrification efficiency was observed. However, under the low DO (0.5~1.0 mg/L), increase of BCM packing ratio and HRT resulted in large increase of the nitrification efficiency. At the same HRT and BCM packing ratio, the nitrification efficiency increased greatly with up to 15% as DO increased. When the HRT increased from 4hr to 8hr, the denitrification efficiency slightly increased by 5~10% only, under all DO conditions. Systems with BCM had higher denitrification efficiency, ranged 62.7~91.1% than systems without BCM showed 32.1~65.6%. And the increase in BCM packing ratio from 10% to 20% resulted in about 14~16% denitrification efficiency increment. BCM packing ratio showed great effect on the denitrification. The increase of the DO (from 0.5~1.0 mg/L to 1.5~2.0 mg/L) at the same HRT and BCM packing ratio resulted in slight decrease of denitrification efficiency with up to 7% for systems with BCM. But for systems without BCM, the denitrification efficiency decreased with up to 28%. In all system, the denitrification efficiency had more influence on the TN removal efficiency than nitrification efficiency. So, BCM packing ratio (0%, 10%, 15%, 20%) has greater effect on the TN removal than HRT and DO. The TN removal efficiency increased as packing ratio of BCM increased with up to 45%. As a result, the highest TN removal efficiency was observed 73.7% at the condition showed the highest denitrification efficiency that DO of 0.5~1.0 mg/L, an HRT of 8 hr, and 20% of BCM packing ratio was maintained.

• 한국환경과학회지
• /
• 제8권4호
• /
• pp.525-532
• /
• 1999

This study was conducted to evaluate capability of dyeing wastewater treatment for 3 type reactors. These reactors were Packed Bed Reactor(PBR), Fluidized Bed reactor(FBR) and Moving Media Complete Mixing Activated Sludge reactor(MMCMAS). Experiments of PBR and FBR were performed by various packing ratios and organic loading rates, experiments of MMCMAS were performed by various organic loading rates. In order to obtain ${SBOD}_5$ removal efficiencies of more than 90%, the F/Mv ratios of PBR, FBR, MMCMAS were 0.11 kgBOD/kgMLVSS$\cdot$d, 0.12 kgBOD/kgMLVSS$\cdot$d, and 0.37 kgBOD/kgMLSS$\cdot$d, respectively. So MMCMAS system which has more active microorganisms showed better capability of organic removal and also stronger dynamic and shock loadings than those of PBR and FBR. In PBR and FBR, the media packing ratio of 20% showed better performance of organic matters removal effciencies than 10% and 30%, but sludge production rate at media packing ratio of 30% was relatively lower than that of 10% and 20%. When more than 90% organic matters removal efficiency was obtained, the ratios of attached biomass to total biomass at PBR, FBR, MMCMAS were 89~99%, 87~98%, and 54~80%, respectively. The ratio of attached biomass to total biomass was low in MMCMAS. This was formation of thin biofilm due to shear force between rotaing disc and water. The average sludge production rates(kgVSS/kgBODrem.) of PBR, FBR and MMCMAS were 0.20, 0.29 and 0.54, respectively.

• 상하수도학회지
• /
• 제24권4호
• /
• pp.433-442
• /
• 2010

BER at different packing ratios of bio-ring media(BRM) was tested to investigate the effect of varying hydraulic retention time (HRT) and current density on the nitrate removal and current efficiency. In the preliminary batch mode experiment of BERs, current density was applied at 2.0 A/$m^2$, 4.0 A/$m^2$, 4.8 A/$m^2$, which correspond to the designation of reactor #1, #2, #3, respectively. The reactor #2 showed a highest nitrate removal rate of 162.0 mg $NO_3{^-}$-N/L/d, and the kinetics of nitrate removal rate was defined as the Zero order reaction. In the primary experiment of BERs, four BERs packed with BRM were operated in varying HRT and current, and the packing ratios of reactor #1, #2, #3 and #4 were 0%, 8%, 16%, 24%. respectively. This results of the experiments indicated that the nitrate removal rate and current efficiency were increased significantly cause of growing of autotrophic denitrification microorganisms on the surface of cathode and media by increasing of the current density and decreasing of HRT. However, The decreasing of nitrate removal rate and current efficiencies were observed in the condition of HRT of 5.25 hr and 4.8 A/$m^2$ of current density. With more increasing current density and decreasing of HRT, the hydrogen inhibition occurred at the surface of cathode. Moreover, nitrate removal rate by autotrophic denitrification microorganisms attached on the media surface was observed to be limited by no longer increasing dissolved hydrogen concentration of each reactor. In conclusion, the highest nitrate nitrogen removal and current efficiency could be achieved when the BER was operated at the conditions of 7 hr HRT, current density of 4.0 A/$m^2$, and 16% packing ratio. And it was found that the amount of nitrate removal by microorganisms attached on the surface of cathode and media (BRM) was 178.2 mg/L and 52.2 mg/L respectively. and the amount of nitrate removal per MLVSS was 0.435 g $NO_3{^-}$-N/g $MLVSS{\cdot}d$ and 0.336 $NO_3{^-}$-N/g $MLVSS{\cdot}d$.

• 대한환경공학회지
• /
• 제22권2호
• /
• pp.331-340
• /
• 2000

기존의 2상 생물학적 유동상은 산소 공급의 한계 및 유동 분산판 폐쇄 등의 문제점을 가지고 있다. 이러한 문제를 해결하기 위하여 3상의 선회류 유동상을 고안하여 그 운전특성을 연구하였다. 합성 폐수의 평균 TOC농도는 약 $70mg/{\ell}$($62{\sim}84mg-TOC/{\ell}$)이었고, HRT는 1.6시간, 평균입경이 0.397 mm인 모래의 충전량을 200에서 $600m{\ell}/{\ell}$까지 단계적으로 변화시키며, 미생물의 농도 및 처리 수질을 측정하였다. 실험 결과 기존 유동상 반응기의 분산장치의 폐색과 산소공급의 제한 등 연속운전에 지장을 주는 단점을 보완할 수 있었다. 실험 기간 중에 반응조의 DO의 농도는 $3mg/{\ell}$이상을 유지할 수 있었으며, TOC 제거율은 91~94 %, MLVSS농도는 $2,360{\sim}3,860mg/{\ell}$, F/M 비는 $0.59{\sim}1.04kg-TOC/kg-MLVSS{\cdot}day$, 생물막의 두께는 $35{\sim}71{\mu}m$, Media-g당 MLVSS는 8.4~17.3 mg/g, 그리고 슬러지 발생량은 $1.08{\sim}2.35kg-SS/m^3{\cdot}day$의 변화를 보였다. 충전량에 따른 MLVSS농도 변화를 분석한 결과 충전량이 $400{\sim}450m{\ell}/{\ell}$일 때 MLVSS농도를 가장 높게 유지할 수 있었고, Media-g당 MLVSS농도 측면에서는 충전량이 $250m{\ell}/{\ell}$일 때 가장 높은 농도를 유지할 수 있었다. 유출수의 SS는 $350{\sim}450m{\ell}/{\ell}$에서 낮게 나타났다. 적정 처리효율에서 F/M 비가 낮고, 슬러지 발생량이 적은 최적조건에서의 생물막의 두께는 약 $54{\mu}m$, g-Media당 MLVSS의 농도는 13 mg이였으며, 충진량은 $350{\sim}400m{\ell}/{\ell}$(35~40%)임을 알 수 있었다. 최적 충전 상태에서 광학 현미경으로 Media를 관찰할 때 Epistylis sp.의 고착성미생물을 일부 관찰할 수 있었으며, Media 표면을 전자현미경으로 촬영한 결과 구균류가 부착 성장하는 것을 알 수 있었다.

• 상하수도학회지
• /
• 제21권6호
• /
• pp.763-770
• /
• 2007

There are many design parameters affecting filtration efficiency such as filteration rate, media packing depth, size distribution, and so on. The sphericity, the ratio of the surface area of an equal volume sphere to the real surface area of the particles, is one of major physical characters of media. The effect of sphericity on the performance of anthracite filter has been investigated. Media from eight water treatment plants have been collected. The sphericity of each media has been calculated by using well known headloss equations such as Kozeny equation, Dahmarajah equation etc.. Columns packed with anthracite media having different sphericity have been used to compare headloss development, floc accumulation in the bed, particles in bed water, filtrate turbidities after backwash and so on. The repeated experiments have indicated that the sphericity of anthracite media may not have remarkable influence on the filter performance as it has been suspected. It also has been prospected in the experiment that the media of higher sphericity would store more particles in the bed and give better filtrate quality, if provided that the effective size and the size distribution of media would be the same.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.302-305
• /
• 2007

In recent years, many researches on new storage media with high capacity and information are developing. For manufacture of optical storage with high capacity, the injection molding process is generally used. In order to increase the filling ratio of the injection molding structure, the injection molding process required for high injection pressure, packing pressure and temperature control of the mold. However, conventional injection molding process is difficult to increase the filling ratio using injection master with the range of several nanometers and high aspect ratio. In order to improve and increase filling ratio of nano-structure with high aspect ratio, the active temperature control of injection mold was used. Experimental conditions were used injection pressure, time and temperature. Consequently, by using the peltier device into injection mold, we carried out the efficient and active temperature control of mold at low cost.

• 한국표면공학회지
• /
• 제23권3호
• /
• pp.150-159
• /
• 1990

The magnetic properties of electrodeposited iron and cobalt films on porous aluminum oxide film were examined. There exists perpendicular magnetic anisotropy due to the shape anisotropy. The coercivity and squareness ratio of films were strongly dependent on deposited particle diameter. The effect of packing fraction on squareness ratio was also apprecible. Unlike the iron-deposited films, the magnetic properties of cobalt films were changed by preferred orientation because of it's large crystal ansotropy constant.(about 10 times of Fe) The Fe deposited films were found to be more suitable for perpendicular magenetic recording media bacause perpendicular coercivity, squareness ratio and the ratio of perpendicular coercivity to horizontal ones of iron films are greater than those of cobalt films.