• Journal of the Korean Society of Tobacco Science
• /
• v.32 no.1
• /
• pp.12-18
• /
• 2010

The parcel wrapper for cigarettes has been used as the package and media materials for protection and design of product brands. The design of parcel wrapper has been contributed to the delivery of brand image and motivated consumer to purchase the brand. Therefore, the properties of parcel wrapper have been paid attention to highlight the design image, and increasing opacity of media materials has been one of the effective ways to obtain clear design on the paper surface. This study was carried out to improve the opacity of parcel wrapper for cigarettes. The effects of pulp composition and inorganic fillers in the furnish on the optical and mechanical properties were investigated. The use of hardwood in the stock preparation gave the increased opacity of paper than that of softwood. The application of higher refractive indices of fillers was effective to improve opacity. Brightness, tensile strength and stiffness were affected by the retained filler amount on the paper. Increase of filler contents decrease the tensile strength and stiffness due to the lesser bonding ability of fibers.

• KSBB Journal
• /
• v.7 no.3
• /
• pp.235-245
• /
• 1992

A number of experiments to treat wastewater of a dye plant were conducted to investigate the basic design parameters and effluent characteristics for aerobic fixed biofilm reactor upon the variation of organic loading rate. The media used for this study were SARAN 4000 D with specific surface area $153m^2/m^3$, and 1000 D with specific surface area $307m^2/m^3$. The influent COD concentration ranged from 1250 to 4080 mg/L. Substrate removal and variation of biomass concentration were observed. At the beginning, the effluent quality was poor but improved as the time passed. However the effluent quality became seriously deteriorated when the media clogged. At influent COD of 1250mg/L, the effluent COD varied little, even if the organic loading rate increased from 0.63 to 2.5kg COD/$m^3$/day. It was also noted that the design parameters for activated sludge process could be applied to an aerobic fixed biofilm process under the experimental conditions.

• Journal of Korean Society on Water Environment
• /
• v.22 no.2
• /
• pp.209-214
• /
• 2006

The purpose of this study is to improve the stream water quality by the experimental hybrid constructed wetland system. It consisted of the water layer, sand bed planted reeds, irises and roses, gravel bed, yellow-soil media bed and a flow shifter (FS) which can reverse top and bottom flow in the middle of the wetland. The organic compounds and nitrogen removal efficiencies varied with the seasons, namely temperature change. In summer, the mean efficiencies of COD and TN in the outflow from this wetland system were 63.4 and 48.0% and shown the highest, respectively, whereas, the suspended solids and phosphorus removal efficiencies seemed to be less affected by temperature. As a result of inspecting the decreasing trend of pollutants, nitrification-denitrification in the wetland was the major removal mechanism for nitrogen, the nitrogen reduction was especially enhanced by the application of a FS in the wetland, and phosphorus reduction was mainly occurred as a consequence of adsorption of the yellow-soil media.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.8
• /
• pp.3121-3135
• /
• 2015

Owing to the increase in consumption of multimedia content and the improvement of device capacity, user demand for high-quality content has increased. However, it is difficult to transport such large amounts of content over the existing broadcasting network with limited bandwidth. To provide high-definition broadcasting, some studies suggest methods of transporting multimedia over heterogeneous networks after encoding content hierarchically. MPEG Media Transport (MMT), standardized by Moving Picture Experts Group (MPEG), is a solution that enables large-volume media transport over heterogeneous networks such as digital broadcasting networks and packet-switched networks. In the case of delivering a scalable encoded video over different networks, synchronization of each stream is an important issue. MMT defines a synchronization scheme, but does not contain sufficient functions to implement it. In this paper, we propose a synchronization scheme for media streams that are encoded hierarchically, divided into layers, and transported over heterogeneous networks. We implement our scheme using MMT and HTTP, and experimented using three encapsulated video streams with different durations. As a result, we show that the proposed scheme can reduce the waiting time to display high-quality video, relative to Dynamic Adaptive Streaming over HTTP-Scalable Video Coding (DASH-SVC) by requesting segments of enhanced layers after calculating the transmission time. Additionally, we find out that the selection of durations have a relation to the characteristics of the video.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.241-242
• /
• 2006

MPEG Surround is an audio coding technology that represents multi-channel audio signal with downmixed audio signal(s) and very low bitrate side information based on Binaural Cue Coding. The side information consists of Inter-Channel Level Difference, Inter-Channel Correlation, and payloads. These two parameters are correspondent to the well-known spatial parameters in psycho-acoustics, Inter-aural Level Difference (ILD) and Inter-Aural Cross Correlation (IACC). Though ICLD is to provide perceptually equivalent ILD to the listener, however, the ILD of the original multi-channel audio signal and that of the MPEG Surround encoded signal was different. The difference between two ILD values is defined as ILD Distortion (ILDD). This paper provides how ILDD can be applied to enhance sound quality in MPEG Surround and how much ILDD is decreased.

• Journal of electromagnetic engineering and science
• /
• v.14 no.2
• /
• pp.47-53
• /
• 2014

This paper presents a high gain and high harmonic rejection low-noise amplifier (LNA) for software-defined radio receiver. This LNA exploits the high quality factor (Q) series resonance technique. High Q series resonance can amplify the in-band signal voltage and attenuate the out-band signals. This is achieved by a source impedance transformation. This technique does not consume power and can easily support multiband operation. The chip is fabricated in a $0.13-{\mu}m$ CMOS. It supports four bands (640, 710, 830, and 1,070MHz). The measured forward gain ($S_{21}$) is between 12.1 and 17.4 dB and the noise figure is between 2.7 and 3.3 dB. The IIP3 measures between -5.7 and -10.8 dBm, and the third harmonic rejection ratios are more than 30 dB. The LNA consumes 9.6 mW from a 1.2-V supply.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.1
• /
• pp.582-587
• /
• 2021

Book recommender system, which suggests book to users according to their book taste and preference effectively improves users' book-reading experience and exposes them to variety of books. Insufficient dataset of book rating records by users degrades the quality of recommendation. In this study, we suggest a book recommendation system that makes use of user's book ratings collaboratively with user's movie ratings where more abundant datasets are available. Through comprehensive experiment, we prove that our methods improve the recommendation quality and effectively recommends more diverse kind of books. In addition, this will be the first attempt for book recommendation system to utilize movie rating data, which is from the media-platform other than books.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.1
• /
• pp.151-156
• /
• 2023

This paper deals with the optimization problem that decides the number of advertising for any media among various medium to maximize the perception quality index of new product meets the given budget and over the minimum reached people constraints. For this problem, there is only in used the mathematical approach as linear programming (LP) software package and has been unknown the polynomial time algorithm. In this paper we suggest the heuristic algorithm with O(nlog n)time complexity to solve the optimal solution for this problem. This paper suggests the evaluation index to select the media most economically-efficient way and decides the media and the number of advertisement. While we utilize Excel, the proposed algorithm can be get the same optimal solution as LP for experimental data.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.6
• /
• pp.3074-3091
• /
• 2019

With the widespread use of the Internet, services for providing large-capacity multimedia data such as video-on-demand (VOD) services and video uploading sites have greatly increased. VOD service providers want to be able to provide users with high-quality keyframes of high quality videos within a few minutes after the broadcast ends. However, existing keyframe extraction tends to select keyframes whose quality as a keyframe is insufficiently considered, and it takes a long computation time because it does not consider an HD class image. In this paper, we propose a keyframe selection method that flexibly applies multiple keyframe quality metrics and improves the computation time. The main procedure is as follows. After shot boundary detection is performed, the first frames are extracted as initial keyframes. The user sets evaluation metrics and priorities by considering the genre and attributes of the video. According to the evaluation metrics and the priority, the low-quality keyframe is selected as a replacement target. The replacement target keyframe is replaced with a high-quality frame in the shot. The proposed method was subjectively evaluated by 23 votes. Approximately 45% of the replaced keyframes were improved and about 18% of the replaced keyframes were adversely affected. Also, it took about 10 minutes to complete the summary of one hour video, which resulted in a reduction of more than 44.5% of the execution time.

• The Korean Journal of Pain
• /
• v.35 no.3
• /
• pp.319-326
• /
• 2022

Background: As the internet usage becomes easily accessible, the patients are more frequently searching about diseases and medical/non-medical treatments. Considering that complex regional pain syndrome (CRPS) is a debilitating disease, it is important to check the information that patients are accessing. Therefore, this study aimed to investigate the reliability, sufficiency, and accuracy of the YouTube videos about CRPS. Methods: This study is a descriptive research which is derived by searching videos using the keyword 'complex regional pain syndrome' on YouTube. Relevance-based sequencing was used to sort the videos. Sources and video parameters were documented. To evaluate the accuracy, reliability and content quality of the videos, Global Quality Score, Journal of American Medical Association Benchmark Criteria and Modified DISCERN Questionnaire scales were used. Results: A total of 167 videos were included in this study. The majority of the videos originated from USA (80.2%, n = 134). The median number of views was 639 and the viewing rate was 73.3. Most of the videos had partially sufficient data and the interaction index viewing rate parameters for videos with high content quality were greater than videos with low content quality (P = 0.010, P = 0.014). Conclusions: Our results showed that videos about CRPS on YouTube mostly had partially sufficient data and include intermediate-high quality contents. Moreover, high-content quality videos had higher viewing rates, interaction indexes, number of likes, longer durations, as well as better reliability and accuracy scores. Videos with high quality and reliable content are needed to reduce misinformation about CRPS.