• 한국지반공학회논문집
• /
• 제27권12호
• /
• pp.17-25
• /
• 2011

흙입자의 구조는 흙을 구성하는 용해성 입자의 용해작용, 건조작용 그리고 고결화 현상과 같은 특정요인에 의해 영향을 받으며 입자구조의 변화는 흙의 역학적 거동에 큰 영향을 미친다. 본 논문에서는 흙속에 포함된 용해성입자의 용해작용이 전단강도에 미치는 영향을 조사하였다. 직접전단실험을 위해 소금과 모래로 구성된 혼합재를 이용하여 시료를 조성하고 전체시료에 대한 용해성 입자의 부피비를 조절하면서 실험을 수행하였으며 실험과 동일한 조건하에 서 수치해석을 수행하였다. 입자의 소실과정을 위해 실험에서는 소금-모래 혼합재를 포화시켜 소금을 용해시켰으며 수치해석에서는 용해성 입자의 크기를 줄이는 것으로 용해과정을 모사하였다. 실험결과, 용해성 입자의 부피비가 증가할수록 내부마찰각은 감소하였고, 시료의 수직변형은 팽창거동에서 수축거동으로 변화하였다. 수치해석은 실험 결과와 유사한 거시적 거동을 보여주었다. 미시적관점에서, 입자가 용해됨에 따라 간극비의 증가, 접촉점 수의 감소, 전단접촉력의 증가, 접촉력 연결고리의 이방성에 의해 새로운 입자구조가 생성됨을 보여주었다. 이러한 미시적 거동의 변화는 입자의 용해작용 후 전단거동에 영향을 주게 된다. 본 연구에서는 기초나 지반구조물의 설계와 시공 시 지반재료의 용해에 따른 전단강도을 고려해야 함을 보여준다.

• 한국전자파학회논문지
• /
• 제13권10호
• /
• pp.1089-1097
• /
• 2002

본 논문에서는 선박에 탑재하여 해상에서 이동 중 위성통신을 수행하는 능동 위상배열 안테나 시스템의 설계, 제작 및 시험을 소개한다. 안테나와 시스템은 광역 하이브리드 추져, 송수신 겸용 안테나 소자, 비대칭 배열, 송수신간의 간섭 억압, 및 주파수 스캔 효과를 보상하는 위상제어 기술 등의 새로운 구조와 기술을 적용한다. 안테나는 32$\times$4 이차원 배열을 가진 송수신 겸용 안테나이다. 안테나는 두개의 빔을 가진다. 안테나 사용 주파수는 수신 7.25 - 7.75 GHz 송신 7.9 - 8.4 GHz이다. 안테나 지향 이득은 수신 35.4 dBi와 송신 35.7 dBi이며, 최대 54 %의 효율을 가진다. 전자 빔 스캔 범위는 앙각 $\pm$35$^{\circ}$와 방위각 $\pm$4$^{\circ}$이다. 안테나는 방위각 360$^{\circ}$ 무한회선과 앙각 $\pm$$10^{\circ}$의 기계적 제어가 가능한 하이브리드 추적 운동을 할 수 있다. 안테나 3 dB 빔폭은 2.2$^{\circ}$이며, 부엽 레벨 -14 dB와 교차편파 억압 송신 21 dB의 특성을 가진다. 안테나는 근역전계 측정 시설을 이용하여 측정하였다. 시스템 성능은 선박 모의 운동 시뮬레이터 위에서 위성 중계기 시뮬레이터를 사용하여 시험하였다. 운동 상태에서 위성 추적 성능은 추적 오차가 3 dB 이내이다. 안테나 시스템은 변조된 위성방송 신호를 주파수 변환하여 안테나 시스템의 변조 신호 송수신 시험에 사용하였다.

• Corrosion Science and Technology
• /
• 제8권4호
• /
• pp.162-169
• /
• 2009

Pure titanium and its alloys are drastically used in implant materials due to their excellent mechanical properties, high corrosion resistance and good biocompatibility. However, the widely used Ti-6Al-4V is found to release toxic ions (Al and V) into the body, leading to undesirable long-term effects. Ti-6Al-4V has much higher elastic modulus than cortical bone. Therefore, titanium alloys with low elastic modulus have been developed as biomaterials to minimize stress shielding. For this reason, Ti-30Ta-xZr alloy systems have been studied in this study. The Ti-30Ta containing Zr(5, 10 and 15 wt%) were 10 times melted to improve chemical homogeneity by using a vacuum furnace and then homogenized for 24 hrs at $1000^{\circ}C$. The specimens were cut and polished for corrosion test and Ti coating and then coated with TiN, respectively, by using DC magnetron sputtering method. The analyses of coated surface were carried out by field emission scanning electron microscope(FE-SEM). The electrochemical characteristics were examined using potentiodynamic (- 1500 mV~+ 2000 mV) and AC impedance spectroscopy(100 kHz~10 mHz) in 0.9% NaCl solution at $36.5{\pm}1^{\circ}C$. The equiaxed structure was changed to needle-like structure with increasing Zr content. The surface defects and structures were covered with TiN/Ti coated layer. From the polarization behavior in 0.9% NaCl solution, The corrosion current density of Ti-30Ta-xZr alloys decreased as Zr content increased, whereas, the corrosion potential of Ti-30Ta-xZr alloys increased as Zr content increased. The corrosion resistance of TiN/Ti-coated Ti-30Ta-xZr alloys were higher than that of the TiN-coated Ti-30Ta-xZr alloys. From the AC impedance in 0.9% NaCl solution, polarization resistance($R_p$) value of TiN/Ti coated Ti-30Ta-xZr alloys showed higher than that of TiN-coated Ti-30Ta-xZr alloys.

• 한국가정과학회지
• /
• 제5권2호
• /
• pp.55-74
• /
• 2002

This study, observing each respectively packaged Kongdduk during 12-day storing period and comparing it with unpackaged Kongdduk, through a cross-sectional view of its fiber and temperament, through a sensory evaluation rheometer measurement of rheological change depending on storing period and packaging type and through the organic acid content, micro-organic change, and retrogressive process. The results are as follows: 1. Kongdduk made of bean oil shows better chewiness, cohesiveness, and moistness than Kongdduk made of bean flour while Kongdduk made of bean flour shows better rheological properties as to roasted nutty taste or roasted nutty order. 2. The test of the cutted loaves of Kongdduk shows that adding oil of proper proportion to the dough of steamed rice cake in accordance with the amount of rice flour has a good influence on rheological properties of softness. 3. Rice cakes were prepared by addition of yellow soybean flour or peanut flour and packaged with CMP or VP, and their physical characteristics were monitored by sensory evaluation and mechanical measurement while storing for 6 days. For VP samples, yellow soybean rice cake showed little changes in cohesiveness, moistness and chewiness for 6 days of storage, while pure rice cake and peanut rice cake showed an increase in strength and hardness from the 4th day of storage. In case of CMP, yellow soybean rice cake hardly showed a difference in cohesiveness, moistness and chewiness for 6 days, while pure rice cake and peanut rice cake showed a significant difference from the 4th day in sensory evaluation. 4. For rheometer measurement, yellow soybean rice cake with CMP or VP showed little changes in strength or hardness for 6 days, while peanut rice cake and pure rice cake showed a drastic decrease in cohesiveness, from the End day and adhesiveness from the 4th day of storage. As there was no remarkable difference or deterioration for 6 days of storage in yellow soybean rice cake between CMP and VP, the ingredients of rice cakeappeared to be more important than the type of packaging in terms of quality deterioration of rice cake. 5. As the storing period passed by, organic acid is detected less at CMP-packaged Knngdduk than at wrapped. and its increasing speed proves to be slower as well. 6. The one wrapped with plyethylene film began to get moldy from pure rice cake or Kongdduk (rice cake mixed with yellow soybean or peanut) after 6 days, and more and more modly after 9 daysor after 12 days, but the CMP-packaged ones didn't get modly until 12 days or more. 7. CMP-packaged Kongdduk showed higher enthalpy of retrogradation than PE-wrapped one. As storing Period Passed by, Kongdduk,s enthalpy grew high. That is to say, it shows that Kongdduk got retrograded.

• Journal of Periodontal and Implant Science
• /
• 제32권1호
• /
• pp.13-23
• /
• 2002

The ultimate goal of periodontal therapy is directed to arresting the progression of the disease, and regenerating the fibrous attachment. In order to achieve such treatment aim, the plaque and calculus must be eliminated and the physiological conditions of the root surface must be changed to facilitate the attachment and migration of the new fibroblasts, The method of changing the proper root surface conditions to promote the healing of periodontal tissue involves mechanical procedures, such as scaling and root planing, and chemical procedures such as tetracycline-HCl. However, the formation of a long junctional epithelium was most frequently observed type of healing. Thus, the aim of this study was to examine in vitro the influence of surface conditioning of dentin by TC-HCl on human gingival epithelial cell attachment. Human gingival epithelial cells were obtained from healthy retromolar pad area(under the age 23 years). Seventy two teeth extracted from severe periodontitis were used as study material. To evaluate the epithelial cell attachment to dentin, the prepared specimen was divided to four groups. For the control group, only scaling and root planing were carried out, and for the test group, 1 to 3, the concentration of the TC-HCl was 50, 125 and 250mg/ml respectively. After cell cultivation time of 1-, 3-. 24 hour, for the indirect quantitative assessment of gingival epithelial cell attached to dentin sample, the absorbance of epithelial cell unattached to dentin was measured. The results were as follows; 1. There was no statistically significant difference between scaling and root planing group and TC-HCl 50mg/ml 125mg/ml and 250mg/ml group about absorbance of unattached epithelial cell to dentin sample(p>0.5). 2. As time passes, the absorbance of unattached gingival epithelial cell to dentin sample was decreased statistically significant(p<0.05). 3. There was no statistically significant difference among the TC-HCl group(p>0.05) We concluded that there was similar effect on gingival epithelial cell attachment between TC-HCl conditioning on root surface and only scaling and root planing treatment

• 대한치과보철학회지
• /
• 제39권3호
• /
• pp.260-272
• /
• 2001

All-ceramic restorations have had a more limited life expectancy than metal ceramic restorations because of their low strength. Their relatively lower strength and resistance to fracture have restricted the use of all-ceramic crowns to anterior applications where occlusal loads are lower. But there has been increasing interest in all-ceramic restorations because patients are primarily concerned with improved esthetics. Many efforts have been made to in prove the mechanical properties of dental ceramics. This study was designed to elucidate the influence of the luting agent on the strength of the Empress 2 crown (staining technique) cemented on human teeth. Seventy extracted human permanent molar teeth were chosen. Teeth were prepared for Empress 2 crowns with milling machine on a surveyor. A dental bur was placed in the mandrel that was positioned so that the long axis of the bur was perpendicular to the surveyor base. Dimensions of the Empress 2 crown preparation were $6^{\circ}$ taper on each side, $1.5{\pm}0.1mm$ shoulder margin, and 4mm crown height. The luting cements used in this study were as follow: 1. Uncemented 2. Zinc phosphate cements (Confi-Dental) 3. Conventional glass ionomer cement : Fuji 1 (GC) 4. Resin-modified glass ionomer cements : Fuji plus (GC) 5. Adhesive cements : Panavia F (Kuralay), Variolink II (Vivadent), Choice (Bisco). Fracture test using Instron. The crowns were loaded in compressive force to evaluate the effect of these cements on the breaking strength of these all-ceramic crowns. A steel ball with a diameter of 4mm was placed on the occlusal surface and load was applied to the steel ball by a cylindrical bolt with a crosshead speed of 0.5mm per minute until fracture occurred. The fractured surface was examined using Scanning Electron Microscopic Image (SEM) to discover the correlation between fracture strength and bonding capacity. Within the limitation of this in vitro study design, the results were as follows : 1. fomentations significantly increased the fracture resistance of Empress ceramic crowns compared to control. Uncemented (206.9 N): ZPC (812.9 N): Fuji 1 (879.5 N): Fuji Plus (937.7 N): Choice (1105.4 N): Variolink II (1221.1 N): Panavia F (1445.2 N). 2. Resin luting agent, treated by a silane bond enhancing agents, yielded a significant increase in fracture resistance. In some of the Panavia F group, a fracture extended into dentin. 3. According to SEM images of fractured Empress crowns, the stronger the bond at both interfaces(crown and die), the more fracture strength was acquired.

• 콘크리트학회논문집
• /
• 제25권2호
• /
• pp.201-207
• /
• 2013

여름철 서중 콘크리트 타설시 높은 온도로 인하여 시멘트 수화반응이 촉진되어 수분의 증발 및 응결이 빨라지게 되며, 이로 인해 컨시스턴시(consistency)가 크게 저하되고, 콜드조인트(cold joint)가 발생한다. 이러한 문제 해결을 위하여 냉각 파이프, 얼음, 액체질소 등을 사용한 냉각 등의 방법이 사용되고 있으나, 사용상의 어려움과 에너지 소비에 따른 경제성 감소 등의 문제점을 가지고 있다. 이 중 지연제의 사용은 경제적이지만 첨가량을 과도하게 사용하면 콘크리트의 경화불량이 발생하기 쉽고, 응결시간 관리가 어려울 수 있다. 또한, 현재 지연제의 인력투입으로 인한 정확한 계량 및 투입이 어렵고 분진발생 등 작업성에 문제가 있다. 따라서 이 연구에서는 분말형 지연제를 의약분야에서 보편적으로 사용하는 정제화 방법을 이용하여 타블렛을 제작하였고, 모르타르의 플로우 테스트 및 응결 시험을 검토한 이 후 콘크리트의 물리적 특성 및 역학적 특성 시험을 실시하여 품질성능에 영향을 미치는지 확인 하였다. 그 결과 리그닌 설폰산염 지연제보다 글루코산염 지연제를 정제화 했을 때 보다 좋은 효과를 발휘 하는 것을 보여 주었다. 또한, 정제화 방법 적용으로 인해 콘크리트의 품질성능을 저하하지 않고 정확한 계량 및 분진발생 등과 같은 관리상의 어려움을 해결할 수 있는 가능성을 보여주었다.

• 접착 및 계면
• /
• 제2권2호
• /
• pp.20-27
• /
• 2001

투명 플라스틱 중에서 가장 많이 이용되고 있는 재료의 하나로 폴리카보네이트 수지가 알려져 있다. 이 수지는 투명 플라스틱 중에서도 굴절률이 1.584로 유리의 굴절률에 상응하는 수치를 가지고 있어 렌즈, 창소재 등 광학적 용도에 있어서 유리의 대체품으로서 호응이 크다. 그러나 장점에 반하여 표면 경도가 낮기 때문에 마찰에 의해 긁히기 쉽고 용제 등에 대한 내성도 나쁜 편이다. 특히 옥외 창 재료로 사용할 경우에는 자외선의 흡수에 따른 표면의 황변이 심각한 문제가 되어 사용상에 한계를 가지고 있다. 본 연구에서는 실리콘 하드 코팅제의 우수한 내마모성 및 광학 특성을 가지며 또한, 무기 실록산 네트워크에 자외선 흡수 능력을 가진 유기 실란을 도입시켜 폴리카보네이트 수지의 취약한 표면을 효율적으로 보호하면서 내후성 또한 뛰어난 표면 보호 코팅제를 제공하기 위하여 quinine과 3-isocyanato propyl triethoxy silane(3-IPTES) 으로부터 N-triethoxy silyl propyl quinine urethane (TESPQU)을 합성하였다. 이 물질을 methyl triethoxy silane(MTES) 과 공가수분해 후 축합시켜 실록산 네트워크 속으로 도입시켰다. 또한 benzophenone 계통의 자외선 흡수제를 유가실란 축합물에 단순 배합한 경우와 비교하였다. 주사슬에 UV에 안정한 형태의 유가 실란, TESPQU를 도입한 경우 좋은 내후성을 나타냄을 확인할 수 있었다.

• 자원리싸이클링
• /
• 제19권6호
• /
• pp.51-60
• /
• 2010

리튬이차전지 양극스크랩으로부터 코발트와 리튬을 회수하기위해 물리적 전처리, 침출, 용매추출 및 회수실험을 행하였다. 실험재료로 제조공정에서 발생되는 코발트계 양극스크랩을 사용하여 단위공정별 최적조건을 구하였다. 물리적전처리 최적조건은 온도 $500{\sim}550^{\circ}C$, 파쇄날 회전속도 1000rpm이었으며, 침출 최적조건은 300rpm, 2M $H_2SO_4$, 2.5M $H_2O_2$, $95^{\circ}C$이었다. D2EHPA(bis(2-ethylhexyl) phosphoric acid) 와 PC88A를 각각 알루미늄과 코발트의 추출제로 사용하여 분리.정제하였으며, 코발트는 염기성시약을 사용하여 $Co(OH)_2$로, 리튬은 탄산나트륨 및 LiOH를 사용하여 탄산리튬($LiCO_3$)으로 회수하였다. $Co(OH)_2$는 열처리를 하여 삼산화코발트($Co_3O_4$)로 만들고 분쇄기를 사용하여 10 ${\mu}m$정도의 입자를 만들었다. 최적조건에서 코발트와 리튬 회수율은 99%이상, 리튬회수율은 99%이상이었으며, 삼산화코발트의 순도는 99.98%이상이었다.

• Restorative Dentistry and Endodontics
• /
• 제29권6호
• /
• pp.489-497
• /
• 2004

Objective: The purpose of this study was to investigate the viscoelastic properties related to handling characteristics of composite resins, Methods: A custom designed vertical oscillation rheometer (VOR) was used for rheological measurements of composites. The VOR consists of three parts: (1) a measuring unit, (2) a deformation induction unit and (3) a force detecting unit, Two medium viscous composites, Z100 and Z250 and two packable composites, P60 and SureFil were tested. The viscoelastic material function, including complex modulus $E^{*}$ and phase angle ${\delta}$, were measured. A dynamic oscillatory test was used to evaluate the storage modulus (E'), loss modulus (E") and loss tangent ($tan{\delta}$) of the composites as a function of frequency ($\omega$) from 0.1 to 20 Hz at $23^{\circ}C$. Results: The E' and E" increased with increasing frequency and showed differences in magnitude between brands. The $E^{*}s$ of composites at ${\omega}{\;}={\;}2{\;}Hz$, normalized to that of Z100, were 2.16 (Z250), 4,80 (P60) and 25.21 (SureFil). The magnitudes and patterns of the change of $tan{\delta}$ of composites with increasing frequency were significantly different between brands. The relationships between the complex modulus $E^{*}$, the phase angle ${\delta}$ and the frequency \omega were represented by frequency domain phasor form, $E^{*}{\;}(\omega){\;}={\;}E^{*}e^{i{\delta}}{\;}={\;}E^{*}{\angle}{\delta}$. Conclusions: The viscoelasticity of composites that influences handling characteristics is significant different between brands, The VOR is a relatively simple device for dynamic, mechanical analysis of high viscous dental composites. The locus of frequency domain phasor plots in a complex plane is a valuable method of representing the viscoelastic properties of composites.